Counting matching models…
Compatible with: HBV W202012HD camera module, e.g. https://amzn.eu/d/00Wpr6v 3D printer cover that uses 16mm diameter bars, e.g. https://amzn.eu/d/2MNf74S Printed with 1.75mm PLA, 0.4mm nozzle, 0.15mm layer hight at 150mm/s. I uploaded a…
Simply camera holder. This one is for HBVCAM-F20216HD, but you can mount it to anything with 2 holes 10mm apart. BOM 2 M3 hammerhead nuts + 2 M3 8mm BHCS for fastening 2 M3 10mm BHCS + 2 M3 nuts for joint 2 M3 6mm BHCS + 2 M3 nuts for…
camera holder for HBV-3M2111 V22
case for HBV 5640 eg Voron 2.4 ---- BOM: 4x M3x10 or M3x12 2x M3x5x4 insert 3x M2x4 tapping screw to mount the cam ----
The bracket is angled so that it points centrally to the print bed (when placed at the top). Mount it to the top right of the tophat and adjust the position before fastening it. You need the following parts: 4* RX-M3x57 threaded inserts…
I made this model to align my cheap USB cameras for stereo imaging. It's press fit for the PCB, and enough space to add some glue to fix the cables. Distance of the cameras is 35mm. I'll add a cover plate later maybe with a strain relief.…
About I bought this cheap little camera figuring I could either make a box and mount for it, or someone else would have one ready. I didn't see any options I liked that were pre-made, so I came up with this. Uses standard action camera…
Just a little camera housing to fit a HBV1313 PCB with OV2659 chip onto the right side of any Voron 0.1 / 0.2 extrusion without preloaded nuts. Due to easy printing the 2x clips have to be glued onto the slots at the upper side of the…
[Update] little corrections & f3d upload You'll need 4 M2x8 SHCS 1 M3x8 BHCS Webcam HBV-1716…
This is a Z axis camera mount for the KP3S 3.0. This uses the low cost HBV-W202012HD camera module. Printer: KP3S 3.0 Filament: PLA Infill: 15% hexagonal Nozzle: 0.4mm Layer Height: 0.2mm Supports: organic, only touching build plate…
(If you find any of my models for sale online (ebay, amazon, etc) it is not me, i do not sell prints; especially not at those insane prices. They are all listed as non-commercial works. I do not have a patreon or kofi or any donation…
Materiál: PETG - Carmine Red Tryska: 0.4 Tisk: 0.20mm QUALITY @MK3S Výplň: 15% Bez podpěr 100% rychlost 48min. Víko má otvory (zámky) pro zacvaknutí do krabičky bez použití lepidla nebo šroubů. LED diody nejsou na kameře standartně a jsou…
very simple and small mount for HBVcam 5m2134 v11 there are two version of cam mount simplified - consists of profilepart, camholder 22degree angle fixed - one file
I needed a case for the HBV Wide Angle Camera sold by Amazon for $18. I use these for my 3D printer and CNC machines to interface with Octoprint Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: No Resolution: 200…
This is a basic enclosure that allows to use C/CS lenses with cheap HBVCAM 1901-720 usb cameras (the sensor on these is tiny: don't expect a DSLR-like image quality!). Note that this enclosure is made to be screwed on a flat surface (that…
Artillery X4 HBV-W202012HD camera mount. I printed it with PLA, since I didnt have PETG. Print Settings Brim: No Supports: Yes Resolution: 0.2mm or better Infill: 20%
This is an enclosure and mount for the HBVCAM v20234 v22 for Qidi X-Plus. It mounts directly under the front lip of the top cover where there is a pre-formed screw hole in the plastic housing, so no drilling is required (see pictures).…
Need a cheap replacement for your K1 Camera, and/or are tired of the limited functionality of the stock camera? This mount allows you to use a cheap HBVCAM as a replacement. Not the best photo quality, but with the right software, you are…
The HBVCAM 1901-720 is a thin usb camera strip, probably intended to be integrated as a laptop webcam. The image quality is mediocre, but the camera is very cheap, making it a good candidate for CCTV setups based on Raspberry Pi-like…
Schlüssel zu entfernen des Lampenglases im Backofen. Bei mir saß dieses Glas brutal fest obwohl der Ofen fast neu ist. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0,20 Infill: 50…
Webcam Mount for the CAM HBV-W202012HD
This is a remixed and complete mounting kit for the HBVCAM-F2216HD V22 camera , designed specifically for the Ender 3 V3 SE . It is based on the original Ender 3 V3 SE Camera Mount , but fully adapted for this specific camera model. 🔹…
Well, this is the first time I post something, currently learning basic FreeCad so this is a poor remix, but just works as intended. The camera holds perfect and points to the nozzle. Any comments are welcome as I'm learning from 0. The…
Well, this is the first time I post something, currently learning basic FreeCad so this is a poor remix, but just works as intended. The camera holds perfect and points to the nozzle. Any comments are welcome as I'm learning from 0. The…
Simple box case for HBV-1705_S1 webcam module Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 100% HBV-1705 S1 Category: Camera
