Counting matching models…
A Desiccant Loop Silica Gel Box for HDRY System Check the HDRY System here: https://www.cc3dprojects.com/cc3d-hdry-system This is a ventilated silica gel box designed to improve moisture absorption inside your HDRY setup. Learn more: The…
holster for the hdr 50 umarex revolver
Punch button for the HDR50 Gen2 (the CO2 cylinder percing button come with a different design in gen2 then in gen1) In the “wait position”, the punch button is “twisted” (something around 27,5°) When the punch button is hit, it turn and…
I absolutely fell in love with the Gecko by Ehdrien the minute I first saw it. I immediately built one and as one does I found things that I wanted to change. I'm not one for modifying stl files as the results can be meh at best…
Disclaimer : This design is intended for use with Airsoft Guns ONLY and NOT for real firearms. Safety Note : Always wear appropriate protective gear, including eye protection, when using airsoft weapons to prevent injuries. Use Caution :…
Precise Slug for Umarex t4e HDR50 This is my design on slug that I have tried on my TR50. Remove support after print is finish like on images! Then simply place the 8mm ball on top and with a little pressure it will click into position.…
I changed the design of the motor mount to place the motor higher. Had to adjust the springs because of the weight of the motor. Had to move them outside the house and created two pieces to fit them. Created an optional cap for the motor.…
Eine Halterung für 2 Magazine der Umarex HDR50. Das Magazin kann an eine Picatinny-Klemme geschraubt werden (3 Stück DIN912 M3x10 und 3 Stück Einschmelzmutter M3). Für die Klemme werden 2 Muttern DIN934 M3 und 2 Schrauben DIN912 M3x30…
Double horizontal magazine for the HDR50. The possibility of mounting on the top RIS rail allows you to place other accessories on the bottom (for example, a flashlight or laser holder - models available on my profile). Remix model:…
Smaller Version Cal 50 with 4,5mm Steel Bullet For Umarex HDR 50 Home Defence Revolver T4E
here is a Pouch for 5 HDR 50 cylinders. that can be mounted on the molle system. to load it slide the top open. place the 5 cylinder in there. and make sure they don't flip over. than you can close the lid. and your ready. this van be…
Softair bottles arrives usually in carton boxes, once a few have gone the remaining ones wander around and they are under pressure! this canister keeps them in place, full capacity is 13 but, because I carry also maintenance oil bottles,…
LED flashlight holder for RIS rail with screws. Perfectly fits HDR50 (Umarex) on the top rail. Fits flashlights with a diameter of approx. 24.5 mm. In addition, 2 cylinder head screws M3x30 (preferably black because of the optic) are…
It adds space for the co2 cartridge plus a bullet storage, so that the cartridge does not fall out, it is necessary to stick foam on the inside as in the photo
They work perfectly fine and snuggly fit. My recommendation is to print them using PLA+. My Settings are listed below: Layer Thickness: 0.28mm Infill: 50% - Cross 3D Print time on a Ender 3 Pro with a mainboard upgrade and BL Touch: 11…
I absolutely adore Ehdrien's retro styled VFG, but it felt a little small in my hand. Now, all four of my fingers can fit on the front. Required hardware: 4 x M3 x 10mm screw (two of which should really be button heads so you don't rub…
Since unauthorized copies of this model are being sold on temu and amazon, it has been withdrawn as a free model. It will be available in my shop and free for club members as soon as possible. Thank you for your understanding and support!…
Put the hairpin in to a hole. Inventor sources included.
here is a Pouch for 5 HDR 50 cylinders. that can be mounted on the molle system. to load it slide the top open. place the 5 cylinder in there. and make sure they don't flip over. than you can close the lid. and your ready. this van be…
Damit Weihnachten noch schöner wird und der Tannenbaum noch mehr Landwirtschaft in sich hat! Zugegeben ist es keine Kugel, sondern eine Scheibe, aber mit Mähdrescher ! Als Vorlage diente ein Claas Lexion . Damit das ganze leichter zu…
A Bosch Pushdrive tool holder for the Ikea Skadis system. I made three variants, one with the upper ring and one without, since the holder doesn't really need it. Also made a shorter version to reduce print time, however I have not tested…
This is my Running Female Archdruid. This model was made for a fellow Patron of MZ4250 who requested it on the discord server that is available for every Patreon tier. A re-poseof a model made by MZ4250 . If you like it and/or would like…
I designed this mount for use of my portable monitor I bought from here: https://www.taobao.com/list/item/wap/594766167530.htm The monitor is 12.5" with 2K resolution. the mount has been verified to be used on both M1 MacBook Air and…
Put the 4.5 mm ball in to a hole. Inventor sources included.
Netanyahu bust heavy files since it's very detailed
Alternative angled talon mag specifically modded for Ehdrien's Gecko blaster. Key features: Use rectangular mag spring instead of drum spring Enabling slide lock when the mag is empty, preventing from empty fire Ammo check windows…
Remix of the previous model that can be mounted on a RIS rail: a regular LED flashlight with a width of 24 mm and a point laser with a width of 19 mm. - LED flashlight available in every store - point laser…
WORK IN PROGRESS! Hi, I created cylinder for Umarex HDR 68 but adepted for ASG. One shoot from HRD will send 6 bb's to your friends in enemy team ;) Cylinder having place to glue 15 rubbers 10x2x6,1mm (width x thickness x inner hole…
This is a small rain cover for a eufy Doorbell 2K HDR T8200 with optional mounting wedges (15° or 30°). I glued the 30° mounting wedge to the rain cover with epoxy glue and attached it to the wall with the eufy mounting plate and 3.5x40mm…
A simple shelf to keep your flashdrives and sd-cards in reach
This is a kit to turn your HDR68/TR68 marker into a .50 caliber plinker. It is nowhere close to perfect so please take your time to read the description before deciding to print. The kit includes: Stick magazine for ~25 12.4x15mm…
If you’ve ever been captivated by the immersive glow of Ambilight , you know just how much it can elevate your TV-watching experience. Ambilight isn’t just a feature; it’s an ambiance creator that extends the colors on your screen to the…
A replica of the Cookie Cutter muzzle brake from Strike Industries It is made based on the photo found in internet, so surely not 100% accurate. But close enough I think. In my case, I mount it on a HDR50 with conversion kit. So the…
Redesigned ¼" tripod/accessory adapter for Sony Action Cams. Designed for HDR-AS100, but may also fit HDR-AS200. This adapter replaces the terrible original adapter that only has a single mounting point at the front of the camera. I broke…
print with supports , rail on bottom , mags pointing up, I used tree supports on both the mag holder and printed the keyway vertical with a small tree support for the key
Helmet mount for Contour ram base to Sony HDr series. Print instructions Unassociated tags: Action camera helmet, Contour roam 3, Contour to sony , sony action cam, Sony HDr As50 Category: 3D Printing Print Settings Printer: Anet AM8…
I wanted to design a double barrel mount for use on a TR50 T4E, HDR50 on the right side, inspired by the ARTENGINE model. Printed in PETG CF, 0.2mm layer, no support, 1mm skirt. You will need to break off the central part (green piece in…
A simple replacement spacer to adjust the belt width in the Umarex HDR50 holster. Fits without glue in a loose friction fit and is high enough to jam against clip when closed. (See pictures) Printable in PLA with no problems. Settings I…
All files in print orientation Multicolor Inserts: Only for the inserts I included Transparent filament until 0.5mm Filament change at 0.5mm to the reticle color For the other parts, go to: No hardware:…
Prints nicely in PLA, no supports needed. Since it's kind of large, I used glue stick on the print bed to make sure the corners didn't lift during print. Fusion360 file is included if you want to store more or less sticks (adjust User…
In Kombination mit einem Karabiner eine Halterung für den Hochdruckschlauch des Finimeters bei der Tauchausrüstung.
There is a version that features a slot at the front for a USB flash drive or for your own adapters. An adapter has also been created for the Raspberry Pi USB flash drive adapter.
WIP: I try to finish and add the lid in the coming days. I designed a box to house a power-supply, Raspberry Pi4 and a micro-controller board for Hyperion/HyperHDR. I used this guide (see below) to build my HyperHDR setup and needed a…
Simple holder for a 20mm rod to insert into the IKEA tisken holder. You need 2 of the parts and a rod that is the length of the shower cabin, which is now simply inserted into the holder. printed with 50% infill made of PETG
The usb body has the dimensions shown in the image (approx). The fit works well and you can print the cap with or without a key ring hole. Use glue.
hdr50 magazine using for paintball or training rubber bols
I have progressed beyond this to working on a gimbaled version, but thought someone might want to use these files which I used on my testbed Phantom a couple of months ago. I will post the sequel with a controller when I get it finished.…
Should fit various models. Print it with TPU. Ninjaflex is a little softer than the original part and is challenging to print with. Or, Ninjatek Cheetah is quite a bit firmer than the original part - maybe reduce walls to leave fins…
I made that original Hydraulic Perss with deep details. I hope you'll like it and print it as soon as possible. thanks
Ehdrien's Gecko blaster is definitely an amazing blaster, but it's not perfect. The slide lock on mine has busted multiple times, so when I saw Trevor's Dante Blaster , I got inspired and tried to apply their method of using ball detents…
Remix that makes the screw holes bigger for M3 screws. Use original model page for other printed parts.
A good place for your cordless screwdriver and a set of bits. I use it for my BOSCH screwdriver. You do not need any suport structures during the print. I have added the gcode for PLA and PETG both are working fine. I have used FUSION 360…
Support for SONY HDR Action Cam. Allows 360 degrees orientation, with 45 degrees tilt adjustment. Soporte para Cámara de acción SONY. Permite giro 360 grados e inclinaciones hasta 45 grados. Ranuras para o-Ring que funcionan como frenos…
NOTE: If you like our designs, please consider supporting our work by joining our Patreon channel—your support helps us keep creating and growing our community! This is a set of pieces that can be used to recreate the UFO Droid - Red…
I designed this bracket so that the HDR50 can be mounted either on a door inside a cabinet or underneath a cabinet. It can be printed in mirror image if you prefer a right-handed version.
Hat camera mount for Sony HDR-AS15. Uses 4-40 screws and nuts. Needed to sand it a little bit to make it fit just right. Need to use support to print. Think it needs to be flipped around to print right. Category: Camera
Print first 0.6 to 1.5mm out of TPU, the rest PETG The top pads on my headphones wore out and to get adequate replacements was difficult, not even considering installing them. So i designed a new headstrap, that I feel is more comfortable…
Ersatzfelge für einen Siku Mähdrescher. Die Felge hat die originalen Maße und der Reifen kann ummontiert werden. Die Bohrung für die Achse sollte am besten auf den passenden Durchmesser aufgebohrt werden und die Welle vor dem Montieren…
A drain hose loop clamp for Fisher & Paykel dual-drain hose DishDrawers, US/Canada models. Good if you can't use their supplied one due to space. DishDrawers have some specific height requirements for the drain loop, and the supplied…
The mechanism allowing the case to shut broke, so I design this replacement. Be aware that, I didn't test if it was still water-resistant .
Just a simple flashdrive case made in tinkercad
Can be printed with minimal supports and in white filament. I used a Raise 3D printer and then used a FormLabs for a final draft part but can still be printed normally. Not toleranced so minor sanding may be required after printing. Using…
Hope ya like it
Fisher & Paykel Dishdrawer dishwashers have a collapsible rack which is held open by a fragile lock. When the lock breaks the rack becomes effectively unusable and plates have to be strategically arranged to stop the racks from falling…
I get these on an event, the classic wooden cased usb pendrives that broke just by looking at it. So I make a slim case because I'm a hoarder. You'll need a little bit of hot glue to keep it in place. Category: Electronics
If you have the HDR MCB5 flashcart that has the bank switching this is the shell for you. This gameboy cart shell that lets you put full sized stickers made from gameboy box art onto the carts shell. To make a sticker all you need to do…
A little print-in-place case to forever customize your Kingston flash drive sp that your neighbor will give it back.
I have slightly modified the thread so that it can be easily screwed onto high-pressure lances. It protects the thread when the lance is not in use. Thread type: M22 × 1.5 mm ******* Ich habe das Gewinde etwas angepasst, damit es gut auf…
Keep your flashdrivers in one place
I split the model in half so that each side has a smooth surface and the USB flash drive can be inserted easily. But it is certainly possible to print as one part. For a better look I printed a contrasting border. This can also be…
J'ai dessiné ce support pour le HDR50 qui possède le support double barilllet. Imprimé en PETG. Il est possible de le fixer contre un mur, une porte ou un meuble avec l'aide de deux vis.
Create you Custom Dragon OC Female Fantasy Creature Category: Toys & Games
Da ich den Drehknopf von meinem Hochdruckreiniger verloren habe, zeichnete ich einen, welcher von der Rückseite angeschraubt wird.
Learn Guide: https://learn.adafruit.com/ambient-video-lighting-with-hyperhdr
This was my first completely original idea. I wanted a way to integrate my washer and dryer into my smart home setup without too much effort. I came across this blog post talking about using some cheap and sensitive vibration sensors and…
Handycam HDR-TG5V holder for shooting desks from above. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2mm Infill: 20% Filament: DEMA 3D PLA black Category: Camera
Diameter has been dialed in specifically for HDR/TDR .50 launcher cylinder. You may need to adjust depending on the amount of wear and tear on your launcher. Tip can be left hollow but, it is setup to take a .177/4.5mm BB. Small tail…
A stand for Sennheiser HDR 185 headphone base station. Print Settings Printer: Vellemann K8800 Rafts: No Supports: No Resolution: 0,2 Infill: 30% Category: Music
Sicherheitsnähdrücker zum Zuführen und Niederhalten von Stoffteilen zum Nähfuß bei schwierigen Passagen PLA, 100% Infill Metallspitze ist eine halbe Spitzpinzette
Just a modified cover for USB flashdrives holder so you can have cleaner desk. These parts are connected with M3 bolts and nuts. Infill: 25% layer: 0.2mm Perimeters: 2
Fits to products Wurth HDR 185 POWER PLUS Wurth HDR 160 Compact Wurth HDR 160 Premium Print instructions matrial: ABS, ASA, PET-G, PC (PLA is not suitable because of direct sun light could deform it) supports: no infill: 40 % layer: 0,15mm
Description and Design Goal: Regular flashdrives are boring. Originally, this was created with the intention of storing rhythgame songs. This shroud is designed to fit the 128gb/256gb Amazon Basics flashdrive (I have not tried this with…
I got sick and tired of always having to open both draws on our Dishdrawer to see which one had the dirty dishes in. This needs a small 6x3 Neodymium magnet pushed into it to allow it to attach to the front of your Dishdrawer dishwasher.…
14 mm ID x 40 mm AD x 38 mm L Gummibuchse/Lager/Dämpfer für diverse Anwendung in New Holland und Case Mähdreschern. Druckparameter: 5 Wände / 100% Füllung / TPU 95A Rubber bushings/bearings/dampers for various applications in New Holland…
Gummibuchse/Lager/Dämpfer für diverse Anwendung in New Holland und Case Mähdreschern. Druckparameter: 5 Wände / 100% Füllung / TPU 95A 21 mm ID x 40 mm AD x 38 mm L Rubber bushings/bearings/dampers for various applications in New Holland…
A free little fish for your desk! This is the "catch" from my FishDragon Snap-Together Kit - a chunky, characterful fish with a hook still in his lip. Prints in one piece, no supports needed for most orientations. Want the DRAGON that…
Spax Screws 3.5MM zum befestigen
The threads in the housing are 3/8-inch and are designed for screwing in metal 3/8-inch to standard 1/4-inch adapters. MATERIAL RECOMENDATION: Case: PETG/PP washer locker: TPU HARDWARE NEEDED: 3x 3/8-inch to 1/4-inch adapter 1/4-inch…
23 mm ID x 40 mm AD x 40 mm L Gummibuchse/Lager/Dämpfer für diverse Anwendung in New Holland und Case Mähdreschern. Druckparameter: 5 Wände / 100% Füllung / TPU 95A Rubber bushings/bearings/dampers for various applications in New Holland…
Un protector de lente para una camara hdr-fx1 sencillo
Da ich den Drehknopf von meinem Hochdruckreiniger verloren habe, zeichnete ich einen, welcher von der Rückseite angeschraubt wird.
Sicherheitsnähdrücker zum Zuführen und Niederhalten von Stoffteilen zum Nähfuß bei schwierigen Passagen PLA, 100% Infill Metallspitze ist eine halbe Spitzpinzette
So, after I put together our Vizio television a while ago, I was deeply disappointed at the lack of design integration for the sound bar. It either had to sit in front of the legs, or way behind, and the angle and spacing of the legs was…
All files in print orientation Multicolor Inserts: Only for the inserts I included Transparent filament until 0.5mm Filament change at 0.5mm to the reticle color For the other parts, go to: No hardware:…
The wall mount for the Umarex HDR50, HDR68 and HDS68 allows for easy, quick, and flexible attachment on the Ikea Skadis pegboard. Since the pegboard is available in several sizes, you can also purchase one that fits, for example, a…
J'ai dessiné ce support pour le HDR50 qui possède le support double barilllet. Imprimé en PETG. Il est possible de le fixer contre un mur, une porte ou un meuble avec l'aide de deux vis.
There is a version that features a slot at the front for a USB flash drive or for your own adapters. An adapter has also been created for the Raspberry Pi USB flash drive adapter.
NOTE: If you like our designs, please consider supporting our work by joining our Patreon channel—your support helps us keep creating and growing our community! This is a set of pieces that can be used to recreate the UFO Droid - Red…
Habe mir aus 3030 Profilen einen Tisch mit diesen Teilen gebaut. erstellt in Auto Cad Fusion 360
