134 models
You can download two versions. 25mm is for ordinary head phones 50mm is for hearing protection. Easy to print. 20% infill. 0.2 layer height I recommend setting your "vertical shell" to 5. Print Settings Printer Brand: Prusa Printer: I3…
A simple hearing aid model to use for dolls or toys.
Simple Holder for your Headphones Ear Protection. I use it with 3M Peltor X4A ( amazon ) The mount uses the T-Nuts for Ikea Skadis Pegboards system from 6d6178 . There is also one Version without T-Nuts Alignment Guide. I used some…
This mount fits into the one of the two card slots on the front of the T-Loc-Systainer generation and holds one hearing protector (e.g. 3M Peltor Optime 1) and two pens or two googles. It does not! fit into the newest generation Systainer…
I have a friend who uses hearing aids for both ears. The hearing aids, doesn't say when the battery is low. it just goes out. That is why he always keeps some batteries with him. The package is thin cartboard and plastic and when carried…
This is a tool for Phonak sky marvel hearing aids battery door. I made it for my son's hearing aids so i put themto my car, kitchen, bedroom etc :) It just works! Resolution : 0.12
I needed a case for 312 hearing aid batteries after Costco changed their battery packaging to a totally unusable design. This case holds 8 size 312 batteries with spring loaded friction arms. The screw on cap has a protrusion to push the…
I wanted to have hearing aid batteries always with me when away from home. Keys on a keychain are always with me, but none of the commercial solution suited me - mostly they were too big. So I set out to create and print my own. The box…
Made ist lighter and as a keychain. Used Chicargo screws with a 5mm nut-side and a distance of 5,5mm. there is a detent for a small spring and ball so that it stays in place Pin (instead of Chicarto screws) for Printing added. Big thanks…
Simple and fast to print hearing protection holder for Festool's MFT/3 profile. Print Settings Supports: No Category: Tool Holders & Boxes
Case much smarter than original BOXES. Neodym magnets act like hinges. This is very helpful, but be careful to insert the Neodyms correctly! Box is smaller and smarter than original box, but has no built-in charging feature . Lid is made…
These analog hearing aids look great - and they really work! I wear them all the time when watching TV. Also, they are fashionable, especially when you go the extra mile and customize the headband. They are inspired by corkymork's hearing…
Small Airtight Box Using desiccant to remove moisture from your hearing aids overnight. I have the batteries stored separately because drying the batteries shortens their life. I was testing batteries, so I made a left and right cap. I…
Remix of https://www.thingiverse.com/thing:2763764
The Simple Hearing Protection HeadPhones Belt holder. Clip your hearing protection to your belt at the range during quiet times and you can go hands free and give your ears a rest, especially on super hot days. Printed at: .2 layer height…
The original Displays mostly are way too big, so I designed a really small box for me.
This is a Remix of the Original Keyring for the Blue Type 675 Batteries. They a quite big, but I got it to fit 6 pcs ... nice :) Made ist lighter and as a keychain. Used Chicargo screws with a 5mm nut-side and a distance of 5,5mm. there…
A hearing aid case designed for 3D printing. Has some storage space and a spot for desiccant beads. Demo video Nothing special needed for printing - print the models as oriented, no supports needed. Use an M3 screw for the storage…
A little hook to open tamper-proof hearing aid battery doors. Works on a Phonak Sky B, probably others. Also check out my Hearing Aid Case .
This box hold a pair of Oticon "More" (1, 2, or 3) hearing aids with a lid that uses magnets to stay in place. You will need 8 - 6mm diameter x 2mm thick magnets. The fit is a bit tight in some holes and loose in others I found that a…
A generic BAHA (Bone Anchored Hearing Aid) as well as a simple mounting plate. My wife works with young deaf children and this allows their stuffed animals/dolls to be a little more like them. Since these are designed for toys the intent…
This is a desiccant puck designed for Phonak/Unitron hearing aid chargers, but it may fit other chargers. It uses just under 1m of filament, it’s reusable, and if you use rechargeable desiccant beads, it’s even more environmentally…
This is a hearing aid case. Printed in PETG or PLA. The inner screw has two sides - one side for the hearing aids, and one side for desiccants (silica gel balls) to control moisture. Print so the desiccant side (shallower side) is face…
These are a pair (left & right) of generic behind the ear hearing aids as well as a simple mounting plate. My wife works with young deaf children and this allows their stuffed animals/dolls to be a little more like them. Since these are…
This is a Storage Box for Sennheiser Sonite R Hearing Aides. The Sennheiser Sonite R that I have, came with a combined charger/storage box. But I wanted a separate storage box to bring along when I am not wearing them, for example when…
ok 3rd time uploading and describing this thing (Thanks Thingiverse's glitchy interface) So... This is an Ear Hook for a Siemens Signia RUN SP behind the ear hearing aid. My wife is very hard of hearing and we bought a Siemens RUN SP…
A small case to put on your keychain to hold 312 hearing aid batteries.
This is a simple sign that I designed in Tinkercad.
I have a friend who uses hearing aids for both ears. That is why he always keeps some batteries with him. The package is thin cartboard and plastic and when carried in the pocket they can fall out. The batteries gets activated when the…
I got tired of my hearing aid batteries falling lose in my pocket. I didn’t want them causing a short circuit in mu pocket when they did. So, I built this. I figured I wasn't the only one, so it is here to share. Interesting note. when I…
My daughter has hearing loss, we were out awhile ago and she decided to hide her hearing aid case after putting her hearing aids in. so I made this. just a little doublesided tape on the bottom of the air tag to keep it in place in the…
I really liked the simplicity of this model but I need it to be on my keychain or I will for get to take it with me when I go places. Thanks to @Bbrinck_1460947 for the initial design if you just want the box and not the additions for a…
Hearing Aid Insertion Tool (4x4mm)
This is to be used with a plexiglass Shearing Guide for Rug Tufting. Video of one can be seen here. This connects to a 1 ¾ inch hose to extract the plastic fibers in the yarn while cutting. Helps keep the air clean and not breath in any…
The small box is intended to store a pair of hearing protectors. All standard sizes and shapes fit. It can be attached to a key chain or something similar. Its handiness makes it great for traveling, festivals or working in noisy…
This is a small storage box for whole packs of hearing aid batteries. I have always received new batteries in the past in a small cardboard box, however the last delivery was without the box and the existing box was a bit worn, so I…
This is the same as this- https://www.printables.com/model/1007864-hearing-aid-insertion-tool except except with 2 slits
I got frustrated by the new packaging of hearing aid batteries that are not only child proof to open but also human proof. You have to cut the packaging apart just to get at a battery or two. These trays will hold 30 - 312 hearing aid…
A different style lid for this model: https://www.printables.com/model/41086-hearing-aid-dry-box I wanted it to be a snug fit. So, if you want to to come off easier make sure to scale it down a little.
A box to attach to a keychain so you can always have your hearing aid batteries with you. Holds four 312 hearing aid batteries. Need two .6mm diameter by 1.8mm tall magnets to insert into the lid and the box. Use a little super glue to…
Box for a hearing aid (Widex CIC Micro) for people with hearing problems. It is designed so there is a space for the hearing aid itself on the one side and a space for a battery on the other side. Battery 10.
Remix of V30 compact Whistle with combined lanyard/hearing protection hole
Really simple thingy. An insert that fits snuggly in the battery cap for the 35 RC. It allows for the use of a 675 sized hearing aid battery instead of the original Mercury PX625 battery. Category: Camera
This is a convenient case to hold extra hearing aid batteries (size 312) in your pocket or purse. I use hearing aid batteries that come six to a packet. After opening and using two, this case will hold the remaining four batteries for…
Thin rotary-style case for holding six 312 size zinc-air hearing aid batteries. Dispenses one battery at a time. Orient parts as shown and print in PETG. Use care when snapping together -- snap bushing is (relatively) permanent. Rotate…
Started with a small-ish box using the Rugged Box (Parametric) referenced and modified it to add a couple insert options (single or dual hearing aids) and a compartment in the lid to hold batteries, and possibly maintenance items like…
A simple spacer to keep the earmuffs separated on Peltor and Sordin, etc., headsets/earmuffs, as recommended by the manufacturer. If the foam/gel cushions are compressed, the insides will set, leading to a decreased seal when worn, which…
Designed to hold type 13 batteries for a pair of hearing aids. I wanted something I could put in my pocket and forget about. The case is also designed for only 2 batteries because I wanted to keep the state simple: either full or empty.…
I needed a hearing aid case to protect my hearing aids when I travel. I figured that I'd add storage capability for four batteries (315), and enough room to store a silicone pack from a filament box. As a fun note, my friend asked if it…
Thin rotary-style case for holding six 13 size zinc-air hearing aid batteries. Dispenses one battery at a time. Orient parts as shown and print in PETG. Use care when snapping together -- snap bushing is (relatively) permanent. Rotate…
english To make the most of my batteries, I use the ones in my hearing aid right down to the last drop. So I should always have spares with me, wherever I go. I’ve used various small boxes before, but – when you need them, they’re usually…
Threaded lid so it doesn't get lost. Fits size 13 batteries.
I wanted a way to bring my hearing aid batteries with me everywhere without using the fragile packaging they come in by default. This print is about the height of three credit cards. I find the center two holes have a hard time fitting…
I am always worried about misplacing my daughters hearing aid tools. so I made replacements. need to be printed with supports for the hook. super quick print I printed 8 of them in about an hour out of petg and works great.
Halterung für einen 3M Peltor 3 Gehörschutz. Holder for a 3M Peltor hearing protection.
Hearing aid case. My son needs case for his hearing aid, so i made some in tinkercad. There are holes for 5mm sphere magnets. Print instructions Category: Containers Summary Hearing aid case. My son needs case for his hearing aid, so i…
Case much smarter than original BOXES. Neodym magnets act like hinges. This is very helpful, but be careful to insert the Neodyms correctly! Lid is made for individual text, you need to use the plain lid an individualize it, or just print…
A small container for carrying around hearing aid batteries, pills, or other small objects. Designed to fit 8 brown/312 hearing aid batteries. The model is inspired by the "Small Keychain Box" by Sander on MakerWorld, but was redesigned…
The hearing protection holder can be used to store three of them in a 90* angle to the wall for example in small lockers, cabinets or where its needed. It can store hearing protections or headphones with a hanger width of max. 30-35 mm…
Stronger hook for battery door opener for Phonak hearing aid
Case designed in a similar fashion to AirPod or wireless earphone cases
I designed this organization for the hearing aid's 13 batteries in the small box (It always fits only small box, 5CM, link: https://www.printables.com/model/1218292-mini-pocket-slide-box-5cm-7cm-9cm-h15cm ) It can hold two box perfectly.
This slim screw-top case holds up to eight 312 hearing aid batteries. Screwed tight, the case measures about 0.5 inch thick by 1.75 inches in diameter (12.3 x 44.6mm). It's smaller than retail battery packaging (fits easily in jeans small…
Made for use with the Howard Leight hearing protection, but should work for most others I'm sure. openGrid snaps are apparently my favorite, so I've added those on the back. The depth of the bracket is 53mm where the headband sits.
had a bunch of size 312 hearing aid battery just sitting around and needed a replacement LR44 for my harbor freight calipers so i made up this little adaptor enjoy Print Settings Rafts: No Supports: No Category: 3D Printing
I have remixed it to work with Type 10 Yellow Batteries. There is also a testpiece, to make a test-print if you have to resize it. Text from the Original: I have a friend who uses hearing aids for both ears. He always keeps some batteries…
I printed this storage box for my dad to store his hearing aids overnight. It was tough removing the shelf to check the silica gel without getting the silica everywhere. So I remixed the shelf to have a little tab that folds out to easily…
This is a keychain for holding size 13 hearing aid batteries. I use a 6mm round magnet to hold them together, it should fit in the center hole and put some thin CA glue to make sure it stays in. Holds 4 batteries. The thinner tab version…
(english below) Ideal für jede Werkstatt, egal ob privat oder im Unternehmen: Der universelle Halter für Gehörschutz und Schutzbrille der APTO systems GmbH für die Montage an der Wand. Ideal deshalb, weil er: universell ist: Es können…
Holder for Combined face and hearing protection with Stihl nylon mesh. Stihl product number 00008840251 The arrow show the replaced part.
Learning how to design with inlayed text (or graphics) in Fusion 360. I had to use Corel Draw to vectorise the .png file I had of the hearing impaired logo, then insert into fusion 360. Exported layers separately then imported together…
After a while with hearing aid I keep forgeting the batteries at home so I made a case for them to hang on my keys. This is currently for the 312 batteries but maybe I'll upload more in the near future :) Just snap the two parts togther.…
A PIP clamshell (hinged) storage box for Phonax (NHS) hearing aids. Room included to allow battery compartments to be opened to turn off aids whilst in storage. Low profile - 10mm deep when closed. Recesses for 2 x 8mm (depth 2mm) magnets…
Warning! - Very tight tolerances ! This is a print that if your printer is not accurate or you use materials with lots of expansion will result in a fused part! I recommend to print with regular PLA I typically print overture PLA Green…
A magnetic case to hold Loop hearing protection, but could hold others too. Closes with magnet, fits keychain link. Prints perfectly well supportless, no special settings needed. Fits a 8mm diameter 3mm thick (or 5mm thick) magnet with a…
I created a series of small boxes for holding stuff inside my toolcase I use as an event technician. This box contains some hearing protection equipment: Senner MusicPro for personal use Silicone Ear Plugs for handing out Generic single…
Easily mounts on your wall using two screws
I remixed this adapter because the hearing aid battery did rotate/move under pressure.
A replacement for the clip that break. Easy print in a few seconds
This is a Remix of the Original Keyring for the Blue Type 675 Batteries. it fits 8 Type 10 Yellow. Changed it up, use a short M3 screw for the center and the detent is very small and without a spring. The size is for a well adjusted 3D…
A drying containers for hearing aids and cochlear implant sound processor. Using on Jodi-Vac XL or other like machines. You need to prepare M3 screw 5mm 4 and nut 4 as its foots. Category: 3D Printer Accessories
A deep hook to hang hear protection ear muffs. Screws to the wall.
Travel case for Hearing Aid remix with a bit more inner space The added print in place hinge for the clip is small and works fine, if you choose a layer high around 0,15mm
I printed in Bambu pla tough+ on a bambu A1 high quality .16 3 walls every thing else was stock settings.
This is a replica of the grey injection-molded piece in the photos. The piece is a replica of a hearing aid holder with a speaker. (The 3MF file has 2.6 million triangles lol.) Designed in Fusion 360. Printed on my Ender 3 Pro with 1.75mm…
Modified @ThomF_1168178 great design to hold the two parts together at a set tension. Press fit an M3 nut on the bottom part (yellow in the photos). Set the tension of the M3 button head screw and add a dab of fingernail polish to hold…
I designed this plug-in charging holder for a neighbor's hearing aids because she didn't have a place to put the charger near the available outlets. If you're unsure whether the holder will fit your charger, please see the attached sketch…
I made it with my pipes and a 3D printer. The black ear pads are molded with TPU. This was fitted into an aluminum pipe with an outer diameter of 4 mm. The earpiece part was designed with a diameter of 12mm and a total length of 12mm to…
Small Airtight Box Using desiccant to remove moisture from your hearing aids overnight. I have the batteries stored separately because drying the batteries shortens their life. I was testing batteries, so I made a left and right cap. I…
This is a small case which fits on a keychain, so that you never forget your ear plugs. I printed the case in Fiberlodgy FiberFlex 40D without supports, a brim is necessary. First print the fit test file split in two parts. Use for…
Clip for Medical Masks to use with imaired hearing aids People wearing hearing aids are facing issues when using medical facemasks, the rubberband keeps getting stuck behind the hearing aid and it will rip it out if you try to put the…
2 piece design for a holder for my hearing protectors so they don't sit on my bench. First design for this, I tried gluing the two halves together. Depending on the glue, this may work well or may be messy, so I redesigned to use…
I have my hearing protection surrounded by spiders so I'm afaid that I will have few small boys in them so I 3d scanned it and modelled perfect fit, I THINK i have Stihl 500 face and hearing protection kit, but im not sure, might not fit…
If you have a 3M Worktunes that uses a two piece headband that looks broken like this: I made a one-piece FLEX design. Print with TPU. Printed 0.2mm STRUCTURAL, 2 perimeters, 10% infill, no supports. The slots have an overhang which…
Improved badge clip dimensions on reverse - stronger Badge designed to be printed face down. I do manual colour changes so I include prusaslicer file with custom gcode This version with inset text helps to avoid my dog rubbing the badge…
This is an organizer for batteries for BAHA hearing aid box PONTO 4. An arrow added to indicate used battery place. Try to use smaller nozzle (I have used 0.6mm) for better fit.
This is a great model from Doug, and serves me very well, but I modified it to make room for a bit more dessicant. Printed on a Prusa Mk4, using eSun PLA, and with supports.
Not easy to get the correct magnets, so I have tweaked the lid so that it has small hinge pins that fit into the box. Make sure the box holes are cleaned out with no debris. It can be a tight fit to get it in. Put one end in first and…
Meant to be stuck to a wall with tape
