23 models
BiQu H2 fanduct for a single 5015 fan Parts Needed: 2x M2.5 x 6 countersunk screws 2x M3 Nuts 2x M3 x 24 screws Printsettings: Layerhight: < 0.15mm Support Needed BiQu H2 fanduct for a Dual 5015 fan Parts Needed: 2x M2.5 x 6 countersunk…
I noticed that the wrench with chamfers is very close to fitting IBnobodys heatblock clamp so i remoxed the STL to make
E3D socks will fit the mini and worked well for me, but there is some noise in the community about how stable they are. I wanted my own. If you're based in the UK and would like one of my prototype moulds or socks, private message me.…
Part cooling fan for biqu h2 v2s that have bigger air outlets. Use 2x heat set inserts to mount the fan.
Made a mold to make your own silicone socks for the MP Select Mini V2 hotend like the E3D ones but to the proper measurements, this does not fit E3D hotends or colones, only the MPSM V2 stock hotend, the block measurements are…
Gridfinity Prusa MK4 Heatblock/Wrench Holder - holds 1 assembled Prusa MK4 heat block with nozzle, thermistor and heater along with the Prusa nozzle wrenches and 3 of the Allen wrenches included with the Prusa MK4. Bin size is 1x1x6…
Enables the nozzle to be changed without removing the part cooling duct and fan. Print instructions This is a clamp mechanism that fits round the X carriage and bearing rods of a Prusa i3 MK3S to hold the heatblock in position whilst the…
=================PLEASE LIKE AND SHARE============= Designed for the contest - it is just a simple novelty box in shape of famous E3D V6 Heatblock and Nozzle combo. The nozzle used for locking and unlocking the lid by turning 90º. See…
Drilling a hole in the "first" Stock nozzle will prevent from falling out. Use a 2.5mm drill and go (if possible) 6mm deep. If you go through it doesnt matter. I use 2.5x5mm Spring type straight pins to fasten the nozzle in the Block. The…
Made this edit in fusion 360 to move the ducts 10mm lower to allow for use with volcano style heatblock. Included step file for customization Category: 3D Printer Parts
Chłodzenie dla drukarki Fan 4 Max Pro Anycubic z blokem V5
I thought pyr0ball's mold design was simple and worked great as far as overall fit/finish and ease of use. However the socks it produced were about 1mm too long with the nozzle tightened down against the heat block. So I remixed it to…
DIY Heatblock design for Volcano
Dual 5015 fan duct for sv04 printer with volcano hotend. Really increases the cooling performance with out sacrificing on the idex extruder clearance/ copy & mirror print area. Should clear the volcano heat block, but you might want to…
UPDATE : (v1-2, 1 mar 2026) added a cutout for the heater housing on the printhead pcb: BOM : 2xM2 bolt 6mm 2xM2 nut 2xM3 bolt 4 or 6mm 3xZip Tie 2mm width Description : I made this mount for easy printhead removal, allowing the…
I made a 20mm wide custom heatblock out of copper for my E3D v6 and wanted a silicone sock for it. As the heatblock is custom I needed to design and mold the sock for it. There probably aren't many heatblocks out there that a sock out of…
EDIT: A remix of LazaroFilm's https://www.thingiverse.com/thing:2811140 I wanted a tighter fit and since there are no wires on the left side, I closed the U cutout. Fits fantastically on my Monoprice Select Mini v2 Q4of 2017 edition 3D…
Modified Duct and base to mount HF hotends on Ender 3 & CR10 printer styles with Orbiter 1.5 extruder: - Volcano - Rapido HF - DragonACE (not tested) - DragonSF/HF (modded heatblock) - Dragonfly (modded heatblock) standard E3D V6 hotend…
A 3D scan using my Creality Sermoon S1, and a retroengineering to make a 3D model of the HT Hotend.
So i decided to print a nozzle out of ABS with a 0.15mm nozzle to push PLA through for kicks, set it first to 60c, then 100c while i kept pushing pla through it, set it to 120c, wiggled nozzle, noticed it was now literally wet spaget/as…
I mod Volcano horn cooling for Biqu H2 with Phaetus HF Heat block Category: 3D Printer Parts
My mount for H2 with microprobe and Phaetus HF Heat Block Category: 3D Printer Parts
UPDATE : (v1-2, 1 mar 2026) added a cutout for the heater housing on the printhead pcb: BOM : 2xM2 bolt 6mm 2xM2 nut 2xM3 bolt 4 or 6mm 3xZip Tie 2mm width Description : I made this mount for easy printhead removal, allowing the…
