1,413 models
Made this stencil to create a checklist on a post-it (or sticky) note pad. The stencil surrounds the notepad to prevent it from sliding around, and can also be used as a base to go underneath for safe keeping.
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
A NEW VERSION OF THE CASE A V2 is Available HERE : https://www.printables.com/model/1120097-flipper-zero-case-v2 SnapBumber for WifiModule : https://www.printables.com/model/392270-flipper-wifimodule-snap-bumper-v10 i'm learning 3d…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
Hector from Coco
Print approx. €10.03–€12.26 excl. taxPreliminary estimate for one variant
Simple two parts tool to check the profile of your tires: 3 different designs. Play with color changing tools to make the text the more readable. FDM or SLA printer compatible.
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Imprints clay with a geometrical checkerboard texture. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20% infill in PLA. The outside can be sanded to…
Print approx. €2.22–€2.71 excl. taxPreliminary estimate for one variant
This adapter collar is designed to allow the AutoAqua Smart Stir to accept the glass cuvettes that come with Hanna Checkers (Hanna Instruments HI731315).
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to create a Pokemon themed checkers piece for a gift and came across the mandalorian checker piece by nat_a_cyborg and really loved the textured outer ring they used on their design. So I started with their design and removed all…
Print approx. €4.66–€5.69 excl. taxPreliminary estimate for one variant
This is a boardgame optimised for a prusa mini Print settings: Board: Standard settings 2 filament changes PLA Stones: Standard settings Grid of 3x3 stones PLA Happy playing! :)
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Checklist Stencil Circle & Square
Print approx. €1.74–€2.12 excl. taxPreliminary estimate for PETGSource material: PET
Box Note 77mm Circle & Square post it note sticky notes cube 76x76mm
Print approx. €1.74–€2.12 excl. taxPreliminary estimate for PETGSource material: PET
Print details: I printed with a 0.8mm nozzle, but any size will work. There is a pause in the included G-code files to insert the magnets. There are hidden pockets that fit the magnets in the link below. Make sure the poles are matched up…
Print approx. €1.01–€1.24 excl. taxPreliminary estimate for one variant
This should print just fine on a prusa mini or larger. Print 4 of these boards and lay them oiut to make an octogon. Chess starting positions are on the split sides. of the octogon. Print cehss or checkers pieces at .5" in diameter at…
Print approx. €4.77–€5.83 excl. taxPreliminary estimate for one variant
Are you craving a twist in your usual chess games? Add a touch of linguistic charm to your game nights with this latest creation, CheckMate Typography Chess! Now with built-in magnets in the chess pieces and board, every move you make…
Print approx. €4.89–€5.97 excl. taxPreliminary estimate for PETGSource material: PET
The game board can be folded into a box and then houses all the game tokens. You can use it to play Reversi/Othello or Checker. Gamebox : Insert a piece of filament into the hinge. The best time to do this is when the box is still…
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant
Vysliceváno pod úhlem s podporama z PETg pro větší pružnost. Tištěno za nižších teplot.
Print approx. €2.32–€2.83 excl. taxPreliminary estimate for PETGSource material: PET
These pieces have been scanned then modeled and should be reasonably dimensionally accurate to the originals. The original release included a rather odd 10.125" square checkerboard which I have also modeled and included as a multicolor…
Print approx. €4.16–€5.09 excl. taxPreliminary estimate for one variant
Stangenhalter für Heckgarage die Heckgarage eines Frankia Platin. Das rechte Bauteil hängt schraubenfrei an der Verkleidung des Heizungskonvektors, das linke ist in meinem Fall an einen selbstgebauten Regal aufgehängt. Alternativ kann…
Print approx. €4.96–€6.07 excl. taxPreliminary estimate for one variant
A tile rack for Heckmeck/Pickomino . You can easily fit seven racks into the Deluxe Box (which is the maximum number of players). Updates Changed the design to avoid slippage of the tiles. Support My Work Should you want to, you can…
Print approx. €1.25–€1.52 excl. taxPreliminary estimate for one variant
I made verification badge for Printables.com because I think it's funny. Please enjoy, I may add a spot for a fridge magnet.
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
Um meinen Reflektor am Heck unter die Sitzbank zu montieren habe ich diesen Winkel benötigt.
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET
This is a very basic cover or holder to keep a 18650 battery contact and an basic 3 digit voltage checker together. you need: 18650 battery contacts like this…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
This is the 3D-Model notebookcheck uses to test and review FDM(FFF) 3D Printers. With a base of only 66 mm x 66 mm, it can be used to find multiple quality issues. Integrated are tests for the build plate adhesion, extruder accuracy,…
A cool checklist / to do list in which you can insert paper and close the cover to secure! The model is print in place and comes off the bed with moving sliders and hinges. Comes in three variants, normal, one for hanging e.g. on a wall…
This is a super easy Step-by-Step guide and model set for making your own custom QR Codes using only a single color of filament. While you can still use a different color at the last 2-3 layers if your printer supports that, it is…
Bambu Lab Printer X-Y Squareness Check Adaptors to be used with Kent set squares. I will Add more detail when I have time. After any adjustments always run a full calibration. The following is to be preformed after following the Bambu Lab…
NEW DESIGN: https://www.printables.com/model/264994-brembo-brake-disc-v2 Just a Brembo Brake design. It had textures too but Fusion didn't let me export the textured file. Please comment if you have printed it and let me know for any…
keychain for your needs. Cut Down if need be. 4mm base and 0.8 color change (0.2 layers = 4 layers) 35mm x 27mm 6mm Keyring hole
In my house we're big fans of Bluey that we watch on Disney+. We wanted a Hecuba garden gnome like on the show but finding nothing available online I decided to try drawing and printing one myself. This is not the kind of thing I'm good…
Check out the video around this project!: https://youtu.be/1E3Ajqaapqk 0.4mm Nozzle 0.2mm Layer height
This is a quick print printer health check. It has overhangs, holes, curved recesses, strings, posts, thin walls and surface details and part of the base is one layer thick so that you can check first layer quality. Print at 0.3mm layer…
Easy to print, customizable text via .STEP, Snap-fit assembly! Create your own Agenda for any occasion. No support required. To ensure smooth operation and that the sliders stay in place, add some Super Lube or grease under each slider.…
Background: First of all, this was inspired by a commercially available product. However, as reviewers indicated, the pieces do not stay in place as intended, and does not include checkers pieces. So, the challenge to design a portable…
It's a big check-engine light! Use "LED neon" strips from ebay or aliexpress, about 6mm wide and 12mm high, 3m length. I did not add holes or cableways, that'll be V2. It's easy enough to drill or poke holes where needed. This is a big…
A simple floor pattern inspired plant pot Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a lower layer…
Just a 100mm x 100mm x .2mm for 1st layer check
This easy-to-read calibration cube helps you quickly check whether your printer is printing the correct size, in the correct direction, and with good quality — all in one short print. The model includes clear X, Y, and Z letters in two…
This is simple checkers set with crown pieces. When your player reaches the first row of your opponents side it becomes a king and can move forward and backward. Instead of stacking pieces you actually give them a little crown to show…
Spice up your makerspace / garage with this terrifying check engine light! Wall mounted with double sided tape or gluespray. Make sure to scale the stl to the size you want, both x,y and z!
This is a model designed to help keep the position of the honey comb panel for PHECDA Engraver in a fixed position. It is not perfectly centred on the day it was uploaded, but I will seek to change that by getting accurate dimensions from…
This is a checker that I designed to go with the Mininalist Chess Set found here: https://www.thingiverse.com/thing:2552392 I printed them at 60% to fit the chess board that I created. That can be found here:…
The box consists of a customizable lid and base optimized for the Wera Tool Check Plus. It is closed with 2 clips and uses 6x 30mm M3 bolts. Print gasket in TPU The top inlay file can be edited to hold other tools. Also includes TPU Seal:…
G36 speedloader created from several 3D models- combining expierience into a speedloader who can load 10 bullets who are on factory rail and inserting induvidual bullets (5 in short version or 10 in long version). Simple model to make…
Hecate is an underworld goddess originally worshiped in the southeastern part of Asia Minor. She could return souls to Earth, where they manifested themselves as tormentors of humans and caused nightmares, epilepsy or madness. When Hecate…
My attempt at building a funnel for the Armanov 9mm ammo checker / gauge. Was designed to print in two parts, a vertical shell that surrounds the checker and the funnel part which nestles into the shell and funnels loaded cartridges into…
This design, while intended for use with an ams/ace system, BUT if you wish and do not have multi-color printing, you can manually change the filament on your 3D printer (the last layer is the second color). Use the Base+Top_9x9_wm. For…
This is an organizer for the board game Twilight Imperium 4th Edition and its expansion Prophecy of Kings. It is a remix of my previous organizer ( https://www.thingiverse.com/thing:4534520 ), so you can keep the already printed faction…
Made this controller wall mount holder because I didn't want to use screws. You can use any double-sided type you like ( the one I used ). Stick two lengths to the back (see picture 4) and stick it to a wall and you're done. I've been…
I use this in a water removal vacuum device. Water is sucked off the floor into a bucket, the vacuum keeps the check valve closed. When the vacuum is turn off the bucket drains through the check valve. So it's not meant to be a perfect…
Introducing the Ikea Skadis pegboard hook made for the new Wera Tool-Check PLUS. Designed with precision, this hook perfectly complements the Wera Tool-Check model that lacks a back bracket for the belt, ensuring a secure and snug fit.…
Overview Traveler, beware the crossroad - for HECATE draws near! The Hecate mod converts the Nerf Bigshock into a four-shot inline clip blaster that loads from the rear! This uses half-length short darts, and can achieve a performance of…
Another thing that came out of my ventilation system for my 3d printer setup. I needed a check valve that prevents air from the outside to come in while letting air be pushed through from the inside. I tested some off the shelf stuff but…
ENGLISH (deutsche Beschreibung weiter unten) A set consisting of three popular board games in a compact case: Chess Checkers Nine-mens morris The beautiful chess pieces were modeled by Jacob G:…
This is an optimized version of “Lucy” (Australopithecus). This skull has been optimized to print in around ½ the time without any loss of quality (the original scan of the skull has many voids which drastically slows down printing time.…
Add-on for the Magnetic Chessboard with a set of checkers pieces and a matching storage box. If you like my Magnetic Chessboard and also play checkers, then this is for you. It is only 2 cm high and is attached underneath the existing…
Something I wouldn't want to see in my car but it's fun to have on the Christmas tree :) Supports: No Resolution: 0.2 Infill: 15% Filament material: PLA
[V3 available now on MakerWorld: https://makerworld.com/en/models/1521236-phone-holder-for-hammocks-tents-rope-lines It's now even smaller and all tolerance issues are fixed] Hammock Phone Holder V2 - Now even lighter! New updated…
This is my take on TI4 organization including Prophecy of Kings. As with all my inserts, my goal is to minimize setup and teardown as much as possible while keeping the contents snug and protected from jostling. All files were printed…
Printed using a colour change for the white squares.
an ancient humanoid skull that is anatomically correct Print instructions needs lots of supports
1 x 45 degrees angle checker 1 x 90 degrees square Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 50% Filament: Prusament PLA Grey Notes: Any material does the trick. Category: Hand Tools
These strobe disks are for checking/adjusting the speed on your turntable, assuming it doesn't already have this feature. When using the applicable disk, viewed under fluorescent or other 50 or 60hz light (neon or similar) with your…
Heckflügel für Worx Landroid
A chart to compare items against your 3D-printed measurements. Very useful if you are creating 3D designs or sorting bolts. Swap your color to change the color of the measurement, or use a sharpie to highlight them! The threads left and…
Leg locators for Elegoo phecda laser to give defined location, also height adjustment using 2mm pins, allows you to leave the additional risers fitted if used with honeycomb corner locators. Corner location for honeycomb bed again with…
A calibration block for 3D printers. This has gaps from 0.05 up to 0.5mm with labels on each one. Test it with whatever your preferred print settings are.
Check Engine Keychain Motorkontrollleuchte Schlüsselanhänger Printed in Bambu PETG Purchasing or downloading this file does not give you the right to sell physical prints of this design. Commercial license is available for this design by…
Husqvarna/Stihl Heckenscheere/Motorsäge Wandhalterung.
Meet Bobble Bot! A charming, spring-loaded miniature robot and wiggly fidget companion that fits perfectly in your hand. Optimized for 3D printing, this simple and fun fidget toy is perfect for your desk - just press its head and watch it…
I was tired of losing a little bit of powder when it balls up and falls out of my reagent satchets. This print works well so far, although I'd like to try sanding the inner funnel portion, vapor smooth it or print it in SLA for further…
his is a fun board that I made to play checkers with my daughter. I made twist on the normal checker piece and board so that they can be printed without any support but still nest for "Kings" and also fit nicely into the spots on the…
Stackable, 1-2 color pieces for checkers / draughts. Print bodies in one color or in two colors (first crowns and then bodies on top of crowns). For best playing experience don't save on plastic to make pieces pleasantly heavy. Print in…
This is a simple holder for your Wera Tool-Check. There is a version for screwing to your wall and one each for IKEA Skadis and Wall Control pegboards available. Prints well in the orientation as it comes from the STL file using PLA with…
Print the parts. The handle horizontally on the print bed. Apply soft tape to the spot where the sandpaper or emery cloth will be applied (white in the picture). Cut sandpaper or linen 10 mm wide. Assemble the whole thing with M4 tread…
Aliens (1986) James Cameron The Heckler & Koch VP70 is the service pistol of the Marines in the movie. This gun is notably seen in the hands of Private Frost (Ricco Ross) just before the Aliens attack. Cpl. Ferro (Colette Hiller) attempts…
Printed from PET-G due to higher strength and UV protection. Use string of filament as the rotation axis of the flap. fasten ends in prepared holes with a soldering iron. Jako osa otáčení je použit kus filamentu. Konce jsou roztaveny…
Sticky Note stencil I designed inspired by this video I saw on Instagram. I could find 3D Printable files so I made them. The print contains 4 files: Sticky Note Holder.stl : This is the base/Holder Checklist Stencil.stl : This is the…
A fillet gauge is a tool used to measure the radius of curved edges (fillets) to ensure accuracy and consistency. It helps check if rounded corners and smooth transitions match the intended design. Ideal for quality control,…
CHESS Set in tribute to Dachau's prisonners I designed this chess game as a tribute. I visited the Dachau's concentration camp in Germany where I saw a wooden chess game hand-carved by prisoners in the camp. I redesigned some pieces…
Most stencils I found were made for post-its or pocket notebooks and didn't work for my whiteboard. The board I have came with large tipped markers so I needed something bigger than what was out there. It has three checkboxes and lines,…
"Can you print me one of those sticky note stencils?" asked my friend. “Yeah no problem, I'll see what I can find” I said naively. Several hours and a few rabbit holes later, I discovered that there are a ton of good ideas out there! If…
Ravens were a symbol of war in viking culture. It was said that Odin owned ravens and they brought him messages from earth. He was also known as the raven god. For the second week in a row we got to 3D scan a live animal on set. There are…
This is a chess board I designed so that it could be printed in two pieces and put together without glue. The size of the board is limited by the size of your buildplate. The one in the picture was printed at original size which fits on…
This is a Gridfinity module based on the system released by Zack Friedman for storing a Wera Tool-Check PLUS. It is a 1x5 module and there are two uploaded versions. I have made a 7/6 or 7U high bin for my use case but have uploaded a…
As simple model as it can be. You can stack them nicely. Print wihtout supports (bridging is good enough).
New model for free! Labubu lets checkmate. Follow me for more Z-Minis Figures. You can follow me here https://thangs.com/designer/3Dprint_zafirah Recommended Print Settings (Feel free to adjust as needed): Printer Type: Resin or FDM Layer…
For fuselage 2,3,4, and cover 2, you will need to lower it into the bed to get rid of the connector. As seen in the photo: You will also need to make sure supports are on, and remember that fuselage is 0% infill, flaps are 5%. Set the…
https://en.wikipedia.org/wiki/British_Standard_Pipe This is for common British Standard Pipe (BSP) or G style pipe threads for checking either male or female threads. There are two separate gauges for checking smaller or larger threads.…
Check Engine Keychain Light one layer YELLOW or ORANGE Color is great option
if you want to resize it, go to your slicer (i recommend cura) and resize to the size you what to (write the mm you want to be in the space for resize) takes 20- 3 min for each bb
I designed this chess board to have also a box (or better 2 boxes) for the figures. I got some inspiration from Kalcipher's board ( https://www.thingiverse.com/thing:4782440 ), especially for the tiles. To connect the "connectors" with…
Well. Weekend is one day away and you haven't time to order one of the shiny metal trunk door standoffs to help keep your van from becoming a sauna. So print one. For stability reasons (and support structure hate) the hook gets printed…
This chain wear gauge is optimized for FDM 3D printing and includes built-in calibration features to ensure accurate measurements. It's based on the Shimano TL-CN42 and other 3-pin gauges that measure pin wear , not roller wear—an…
I currently use a lot of Gridfinity for my drawers. That's why I transferred one of my favorite Hanna checker cuvette holders to Gridfinity. You can find the original on Thinigiverse by pw98 .
This is a stencil that fits the Frixion pen to make a checklist for the Rocktetbook Mini notebook. Since the small version is so handy for general use I wanted a checklist for things to be done and made this so it was neat and tidy. The…
King Me! is a mashup of Chess and Checkers. This design features a confused Chess king wearing his defeated opponent as a hat. Rendered in Blender 3.0 Objects can be printed in one piece or two Note: In the two-piece model, the top figure…
This is a quick IPD checker I made for the Oculus Quest 2. Very handy for when you want people to try out VR without needing a ruler to check their IPD The way to use it is by lining up the left point with one eye, and seeing which point…
Adjustable risers for the new Elegy Phecda laser engraver and cutter. Riser (legs) of 20mm, 30mm and 40mm (by combining them you can go to 50,60,70,…) I also made a 5mm feet I printed in TPU to absorb the movement of the machine, you also…
CHECK THE NEW ONE ON MY PROFILE https://www.printables.com/model/1134797-v20-dart-hub-stand-display-holder A simple to print solid darts stand holder /display. With space to hold your favourite stems and flights for that set. The top part…
Print in place checklist. The OpenSCAD code can easily be changed for customized list, just adjust size and spacing. This is based on https://www.thingiverse.com/thing:2068177.
![Hammock Phone Holder V2 [Old version, check description for new one]](https://media.printables.com/media/prints/582669/images/4663470_91478c1f-81a2-4074-8058-87f119204b7e/lighterhanger-v21.jpg)
