207 models
Many cheap printers are using the Cheng Liang P360V24W power supply. The biggest flaw of that model is the loud fan inside the PSU. There are a few cover mods on Printables, but they all just work when the PSU facing out of the printer.…
Print approx. €3.67–€4.48 excl. taxPreliminary estimate for one variant
Bottle-Rack aka Flaschengestell, no pins or glue needed. Fully expandable like the original. Have not tested the whole build height but 3mm tall pieces join well. This is a long print, but if you needed it who's to say where the limits…
Print approx. €44.67–€54.60 excl. taxPreliminary estimate for one variant
Heavens Offical's Blessing : Xie Lan and Hua Cheng
Print approx. €10.22–€12.49 excl. taxPreliminary estimate for one variant
You can purchase DIY kits and fully-assembled devices from my store by clicking HERE This is a fully standalone device designed for the Meshtastic project (https://meshtastic.org). These models are intended for personal use only. DO NOT…
UPDATE 14.04.2024: Added “Battery pack activator” this little tool now enables you to activate your battery pack after swapping cells on the go. The BMS sadly shuts down every time you disconnect the battery and needs to be activated…
Volume knob protection for Quansheng radio UV-K5 & UV-K6 Print Settings Resolution: 0,1 Extrusion Width: 0,4 Outline Perimeters: 2 Top Layer: 4 Button Layer: 4 Infill: 15% - Honeycomb Supports: No Rafts: No Filament: Any
Keine Lust mehr die Spanngurte händisch auszuwickeln? Dann ist es allerhöchste Zeit meine Aufwickelhilfe für den Akkuschrauber auszuprobieren. Ich habe zwei Varianten erstellt: Spanngurte von 35 bis 50mm Spanngurte 50 bis 75mm PLA…
Welcome to Stonehenge! This model was created by Artemio García , available also in MMU version. Stonehenge is a prehistoric monument in Wiltshire, England . It consists of a ring of standing stones, with each standing stone around 13…
Shut your loud machine up for good. Make your fans Wisper Quiet @ 19.9db Works for all Kobra 2 models This is taller than stock PSU cover you will need taller feet Here a link to some feet that work well Bambu Lab Anti-Vibration Feet List…
A miniature interpretation of Stonehenge, reduced to its essential form while preserving its iconic circular arrangement and mysterious presence. Part of the Tiny Landmarks collection, this piece translates one of the most enigmatic…
Standing stones around a nexus of power. Likely to attract undead and monsters. Tree Supports on build plate only. Tree Supports on build plate only Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Base for Quansheng radio UV-K5 & UV-K6 Previous version: https://www.printables.com/it/model/685423-stable-base-quansheng-radio-uv-k5-uv-k6-v1 Print Settings Resolution: 0,2 Extrusion Width: 0,4 Outline Perimeters: 2 Top Layer: 4 Button…
Its a 2-way Molle mount for a Quansheng UV-K5 radios. Can also be used in other 25mm strapping. The mount uses a small nub against a rivet in the clip, to better secure the radio clip in place. Print settings: Best printed in 0.2mm layers…
If you like this model, please consider a donation: Buy me a coffee link Print Settings: Infill of 0% is just fine Wall Count: 4 Top/Bottom Layers: 5
UV-K5 Radio wall mount. Dual and single.
New knob for Quansheng UV-K5 if you lost it or just don't like the color or shape of it. With a button, you can print from ASA and smooth it nicely with acetone vapors. Print parameters Nozzle: 0,4 - O,2 Supports: NO Material: PLA, PETG,…
I did a remix of @t0b1 model, so the Quangsheng K5 Radio will fit too. Tobis model is great, btw great simple well looking design, but i need it for the Quangsheng K5 Radio. I have redesigned the holder part, so it fits for the Quangsheng…
This is a remake of my 70 mm PSU cover for the CHENGLIANG P360W24V used in the Sovol SV06 (https://www.printables.com/de/model/341847-sovol-sv06-psu-case-cover-for-silent-70-mm-fan-and). By using a 92 mm fan, the fan speed can be further…
Easiest remix I've done using only the text modifier in Prusa Slicer 2.6.1 to make a triangular hole as volume level marker. I've included the .3mf file so you can remix your own.
Stolní stojánek pro radiostanici Quansheng UV-K5, díky velké základně je velmi stabilní i s použitím delších antén. Pokud chcete extra stabilitu, vsypte do infilu písek, sůl nebo jinou zátěž. Realy stable base for Quansheng UV-K5.
Perfect fit with no rattle car mount for your Quansheng UV K5/6/ Plus radio on the passenger side ( in my case a Volvo S60 2006) Locks in nicely with a satisfying click with no shaking or rattle while driving. Use double sided foam sticky…
UPDATE 01.04.2024: Added Antenna dapter for original K5 antenna and ABBREE folding antenna. I play around with my Quansheng way to much, including constantly changing antenna, doing measurements and so on, SMA connector is not meant to be…
A basic textured model of Stonehenge in England with some textures for display. blocks can be sized up for stacking and play.
Beautiful detailed model by Spacerobot775, but when I printed it, all the stones were detached and the model came undone,as it were, printing above the base. Three of the stones were actually a mm or so above the base. LESSON LEARNED -…
Made with Fusion 360. If you have something that I could do better please tell me. Follow me on Instagram for more cool prints. https://instagram.com/lukas\_prints3d?igshid=13tcwrb498bas Print Settings Printer Brand: Creality Printer:…
This is a case cover for the CHENGLIANG P360W24V power supply from Sovol SV06, with a hole for a 70x70x10 mm fan and a step-down converter (LM2596 HW-411). There are holes for fusible nuts (M3 with 4.6 mm outer diameter). Unlike the…
After I made the 70 mm and 92 mm Version of the PSU fan case, I got a request for a 80 mm variant from PatrickE which is exactly this one. I did not test it myself, but PatrickE confirmed that it fits and also provided the pictures, thank…
My Cura settings (settings with * are ones I've found to have a large effect on the quality of the print) Hatchbox Light Grey PLA *Temperature: 200 C Build plate temperature: 60 C *Layer height: 0.09 mm Line width: 0.4 mm *Support line…
Ein Ständer für das Quansheng. Verwendbar mit großem oder kleinem Akku. Mit dabei wieder die Fusion Datei, damit ihr bei Bedarf etwas ändern könnt. Viel Spaß beim Nachbau. 73 de DK4DO
Guzheng is a wooden string zither from china. Performers sit by the rectangular head of the instrument and pluck the strings in front of them. By pressing and vibrating the strings to the left of the movable bridges, the player can change…
This is a small skadis mount for the Quansheng UV-K58.
Stable Base for Quansheng radio UV-K5 & UV-K6 - V1 New Version: https://www.printables.com/it/model/695481-stable-base-quansheng-radio-uv-k5-uv-k6-v2 Print Settings Resolution: 0,2 Extrusion Width: 0,4 Outline Perimeters: 2 Top Layer: 4…
Two files - The ‘extended’ version has a longer stem that seems to get a better grip on the pot. If you like this model, please consider supporting me: Buy me a coffee.
Ich habe die Front mit Filamentwechsel gedruckt, alternativ kann diese aber auch in zwei Steps gedruckt und dann verklebt werden.
Got myself an “original” Nagoya na 771 but the included spacer wasnt doing his job and the antenna was not straight on the SMA connection, that for I created a perfect fitting spacer in 3 different heights so when the antenna screws in…
The Chengdu J-20 is a Chinese stealth fighter jet. The demonstrator, which made its first flight in January 2011, foreshadows what could be a fifth-generation twin-jet aircraft developed by the manufacturer Chengdu Aircraft Corporation…
This hand held radio, like other isn't quite stabile expecially during operation with external antennas or mike, so i've quickly made this base . Base stands are available for other radio too. It's made in PETG but any rigid material is…
This model was shared with me as a nice way to hang your Baofeng radios, or more specifically for me, your Meshtastic devices that have Baofeng clips (like those from https://www.printables.com/@AlleyCat) from the dash of your vehicle. I…
This is a remix of the Chengdu J-20 from JackTheTinkerer (go check out their profile), so thanks :). I made the cockpit, engine nozzles and nosecone a seperate part that can be assembled using CA glue so you can print it in a different…
Brown PLA at 0.2mm resolution and 25% infill. == Updated 26/7/22 As part of a project to have the boxed components securely stored, v4 of the treasure chest is taller and longer. Other components are filed alongside this one. Printed in…
es ist ein anhenger wo man das element wekseln kann aber man mus es einbischen schleifen
stand with solid bottom or for balancing weight
Have you ever wanted to Henge but lacked 3d models? Now you can also henge to your heart's content! Print, mix, paint, create your own celtic terrain! Also, if you are able, visit the Capsule chibi project at…
This is a model I made for my Dollfie Dream boy body and it's supposed to resemble Dan Heng from Honkai Star Rail. The head is slightly smaller than your average Dollfie Dream head, which was a choice on my part to make the body look…
Rohrrückzugseinheit und heben uns senken des Rohres mittels Servo.
Dies ist ein Gießkopf für eine PET-Wasserflasche. Das Format des Gewindes ist, das in Deutschland bei jeder Getränkeflasche verwendet wird. Füllung = 15% Geschwindigkeit je nach Material und Geschwindigkeit. Viel Spaß damit. Dies ist ein…
This is remix of 18650 holder made from scratch for 21700. Print with supports. You need: Type-C 2S USB BMS 15W 8.4V1.5A -…
This 3D-printable model represents a reconstruction of Stonehenge as it is believed to have appeared when fully completed during the late Neolithic period. The design captures the monument’s iconic circular layout, including the outer…
If you like me have a battery pack for Quansheng UV-K5(8) radio that is no longer charing or has any capacity, don't toss it or buy new one. Convert it to use 18650 cells instead. Crack open the old battery pack and snip away the nickle…
This is a remix of felixna's model with an added slot for the fan's cable as suggested by Thomas Albrecht in the comments of the original model. The notch is measured from a Noctua Redux fan, but it should be very similar for most fans.…
This beer mat can be printed as a whole using an MMU or similar or print the parts individually and glue them together afterwards. (A well adjusted printer is necessary as there are no tolerances between the parts) I also have coasters…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #7 (0.64mm) swap to White for the rest.
This is a mounting plate for the classical heng long gearbox, ideal for conversions, 3d printed 1/16 tanks or scratch buildings. Since each project is unique, there is a STEP file to modify with the dimensions you need. If you don't know…
Uses M4 screw and nut for attaching to the wall.
Case for protection your battery. Use support as you see in the picture.
The tiny version. So tiny a dwarf could get it into his shoe. Print FULLsize for a very tiny SpinalTap-Henge for your desk, or scale it down to 50% to wear it as a charm for a necklace.
Kroužek pro vymezení prostoru mezi anténou a vysílačkou při použití mezikusu SMA/SMA
Print at a layer height of 0.05mm for best detail. Your printer needs to be well calibrated.
My Quansheng UV-K5 (8) didn’t come with a belt clip, so I designed my own! This clip is designed to be easy to print without supports while providing a secure and functional attachment for your radio. 🖨 Printing Instructions Printer:…
The tiny version. So tiny a dwarf could get it into his shoe. Print FULLsize for a very tiny SpinalTap-Henge for your desk, or scale it down to 50% to wear it as a charm for a necklace. Category: Props
Since I couldn't find a suitable stand, I created one in Fusion 360. 10 letter Cryptex by MasonStonehenge: https://www.thingiverse.com/thing:3074829 My make: https://www.thingiverse.com/make:997143 Print Settings Printer Brand: Prusa…
Ever thought: “I wish I had Stonehenge on my nightstand, so I could summon Celtic gods while sipping coffee”? No? Well, too late. Now you can. A circle of stones thousands of years old… reduced to a few grams of plastic. Archaeologists…
Borussia Mönchengladbach Schlüsselanhänger
When I got my UV-K5 I was not aware that there is a protective foil applied to the screen, it was scratched so I got rid of it. I did not want to leave the original screen surface exposed to the open, its plastic and not glass and there…
Model Hi everyone! Model Stonehenge is a prehistoric megalithic structure in Wiltshire, England. One of the many conspiracy theories surrounding stonehenge is that it was built by aliens. I used this to add a unique twist to my model: a…
remix of @CodeFuPanda_807351 design to fit the UV5R properly.
This is a 92mm fan mod for the common Cheng Liang P360W24V power supply. The assembly requires you to have the following items: 4x M4x30 or M4x40 (with spacer) flat head machine bolts 4x M4 washer 4X M4 nut 92mm fan optional mesh for 92mm…
Air stone from Frozen 2 with 2x5 Lego compatible base Earth stone from Frozen 2 with 2x4 Lego compatible base Water stone from Frozen 2 with 2x3 Lego Compatible base Fire stone from Frozen 2 with 2x4 Lego Compatible base Original artwork…
Hallo, ich habe hier einen einfachen Topf designed, der in die Greenbar passt. Hello, i designt a simple plant pot which fits into the greenbar. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Filament:…
the inner part might be fragile
Das ist die Ersatzteil-Druckvorlage der Schale des Lebensmittelzerkleinerers Multiboy LZ 250 , einem Küchengerät, welches in den 70er/80er Jahren in der DDR hergestellt wurde. Die Schale ist ausschließlich für den LZ 250 vorgesehen,…
en.qsfj.com Printing without supports, Infill: 15%. Share your printed model.
Designed for this molecular Sieve but can work on any that have a diameter of about 50mm. Standing the sieve up is important for saftey as it reduces the amount of moisture and water that can end up in your tank. The model this is remixed…
Free to download! printed with Anycubic Kobra 3 Combo, the 3mf worked for me the best.
I wanted to replace the bright orange knob with something more minimalistic on my frequently used UVK5. I like to print this knob in PETG-GF, but pretty much anything will work. It fits on a Baofeng UV5R and probably lots of other HTs.
Low poly model of Stonehenge. Prints at just over an hour at current size Printed with PLA and tree supports with a brim.
A remix for a 80mm fan for a clean look The holes used for mounting are 3.9mm for small M3 heatset inserts drill to size for large ones -Needs 8 fan screws to complete -Removed buck converter -Added fan surround I used a fixed stepdown…
Put a lid on the Ikea vase to trap most of the moisture inside and have a sealed jar garden. While the lid is not airtight, it suffices if you rarely add some water. To make it alright, you can add some playdoo.
IMPORTANT: This is draft of the idea that I had, so if you want it refined please comment or just do it yourself via provided step file. This print is replacing bottom cover of the charger and adding power switch which you need to wire…
I made an extremely unnecessary upgrade to my Kobra Go PSU to make it quieter at idle and fit a noctua 6025. I'm a Noctua fanboy, and this fan at 12V gives almost the same CFH as the stinky one that was in there already. I just cut the…
This is the BKG Knob for Quansheng radios
As part of a project to have the Hengist boxed components securely stored, I needed a place to hold the road tiles. Looking for Saxon inspiration, I found the Franks Casket [ https://www.bl.uk/collection-items/the-franks-casket ], and…
Command the vanguard of Starfleet's modern armada with this 3D printable model of the Inquiry-class starship, embodied by the USS Zheng He in Star Trek: Picard. Built as a powerful heavy battlecruiser designed for deep-space defense and…
A remix for a 80mm fan for a clean look The holes used for mounting are 3.9mm for small M3 heatset inserts drill to size for large ones -Needs 8 fan screws to complete -Removed buck converter -Added fan surround I used a fixed stepdown…
A "fancy" 2-part knob. A single-part version is also included. Printed with PETG, layer hight 0.2mm.
This sculpture could act as a prop for board games like Dungeons and Dragons, a unique jewelry container, a prop for a sci-fi purpose, or a shelf sculpture. This model was NOT created with any use of AI. It is designed to print without…
Dan Heng Imbibitor Lunae Light Cone Honkai Star Rail Amazing character from Honkai Star Rail Makerlab: reliefSculptureMakerV by Makerworld Made for a big fan! (Personal use only)
Hand tool for loosening or tightening the castle nut holding the SMA connector to the case on the Quansheng UV-K5(8). Printed from PETG, I was able to get multiple removals and tightenings before I broke it enough to be useless. When the…
white until 6.8mm finish with black
I really like the look of the original. But, it was made for the Ender 3 V2 and wouldn't fit my 3. So, I added the rim and screw holes to fit. I also decided to add a fan guard and a few more hexagons.
This plate was generated from different svg templates and mainly reworked on CorelDraw!, then exportes as svg and imported in TinkerCad, cut out, joined, finished and exported as individual stl-files, which YOU can drag into your slicer…
