Counting matching models…
A conversion kit for the BOG DeathGrip Tripod that allows you to use a ball head instead of the included swivel head. With a ball head, you can level the tripod without having to adjust the length of the feet, this allows for much faster…
This is a grenade inspired by the Grenade container (the threading is similar but I don't think they are interchangeable) and the modern Swedish hand grenades SHGR90 and SHGR2000 hence I call it SHGR95. Apart from the design of the…
NOTE: For Primo “C” only (23.5mm OD conduit) . Would probably be easy to adapt to the other variants, but I haven't tried. As part of an overhaul of my MPCNC, I was able to get super cheap HGR15 linear rails from Vevor, and designed…
A proxy model for a popular clan mech. Model on the photo was printed using Prusa MK4 with 0.25 nozzle, PrintWithSmile Rec-PLA (Just Grey) and with 0.07 mm layer height. The model is positionable and various stances can be created during…
Layer height: 0,2 mm; Nozzle 0,4; Material: PLA Depending on the print quality, it may be necessary to rework the sliding surfaces slightly with sandpaper. For a longer service life, a little lubricant should be applied. I hope you like…
If the door needs do be adjusted, the handles break before the screws damage the frame of the door, so sometimes you need them new. This part does not fit to the original base, because I needed to make the groove bigger then the original,…
Fahrrad Bowdenzug- Kabel- Klemme / Clip; Rohrdurchmesser z.B. Lenker: 22,5mm / 25mm 2x Kabel: Durchmesser 3mm; 1x Bowdenzug Durchmesser 5mm. Verschidene Bowdenzug- Kabelklemmen für die Befestigung zwischendurch. Zur sicheren Befestigung…
This is part of a larger project that I will post later. It's useful enough on its own that I thought I should post it. This is for mounting a standard linear switch to an HGR20 rail. Tolerances are spot on, so you may need to play with…
Spacer/adapter made to replace saddle mount on BOG deathgrip tripod. 2 spacer required and a shim if your 3/8-16 bolt is too long (Needed for my 4" bolt). Printed using 3 parameters and 25% infill with PLA.
I realized 20mm cubes make a nice color/material swatch, Not a lot of room to write what they are, but just enough for me. This grid holds them securely, with holes in case some of your cubes don't want to leave home.
Saeco Moltio drawer, drip tray for brew group unit/brewing group. Suitable for the coffee machines: HD8766/01-09 HD8767/01 HD8768/01-03-05 HD8768/08-09-43 HD8769/01-11 HD8769/08-09-19 HD8778/11 ############### Saeco Moltio Schublade,…
Wer kennt es nicht, man brauch eine Bohrung mit 5.0 mm und nach dem Druck ist diese nur 4.6 mm ;) Durch das Druckverfahren beim FDM-Druck werden Bohrungen immer etwas kleiner als im Modell angegeben. Mit Hilfe dieser Schablone kann man…
The main body is not changed (original file included). Push pin made of 2mm nail (cut to required length). Pin made of 2mm wire. Used spring found at home (probably from some mechanical pen). I printed it in Sunly/Jayo silk filaments on…
Ein weiterer einfacher Griff für Schläuche/Rohre mit Durchmesser 57mm. (kleiner geht ohne Probleme, Größer müsste man Testen). Mit schrägem Griff, kann in beide Richtungen genutzt werden. Klettkabelbinder müssen separat gekauft werden.…
Mit diesem Aufsatz lässt sich das Messer einfach drehen und somit z.B. Teig rückstandsloser aus dem Mixtopf entfernen. Das auf den Fotos zu sehende Modell wurde mit dem Prusa MK4 aus PLA gedruckt. Slicer-Einstellungen: 0,2mm Quality,…
This spacer will allow you to use most aftermarket ball heads with a 3/8-16 bolt. The model is designed to be a tight fit to improve stability and rigidity. I used a 3/8 x 1-¼ washer at the bottom to better distribute the load over the…
These are two different spare / replacement darts (one large, one small and very close to the original) that can be shot by the Spin Master 6052276 - Dreamworks Dragons - Deathgripper (Amazon ID: B07JXTW43F) — I would be very happy if you…
Replacement Jar for the Columbia Grinder by CrushGrind. Improved the wall thickness and the Volume a (very little) bit. Print instructions Category: Kitchen & Dining Summary Replacement Jar for the Columbia Grinder by CrushGrind. Improved…
Ein einfacher Halter für Schläuche/Rohre mit Durchmesser 57mm. (kleiner geht ohne Probleme, Größer müsste man Testen) Klettkabelbinder müssen separat gekauft werden. Einfach auf Amazon “Klettkabelbinder” (mind. 30cm) suchen. Auf gerade…
I use 195mm long machanism: CrushGrind® Shaft Upper shaft key is glued. Material PLA Step 0,2mm
Bring the hits with the DeathGrip by DMF. Gives a better aim posture and it looks cool!!! Make an already awesome blaster greater. Highly recommended for my large wingspan peeps. Foaminati tech may have been utilized during the creation…
Rotary handle for mounting on cable reel or hose reels. This is a stable large version, in addition 2 deep groove ball bearings 608 and a hexagon bolt M8 with nuts and washers are required. Drehgriff zur Befestigung an Kabeltrommel oder…
Der normale Ladehabel der Diana Waffen mit den 2 O-Ringen gefällt mir persönlich nicht, habe daher diesen Ladehebel Aufsatz kreirt, der das ganze handlicher und angenehmer macht.
Ersatz für die Rücksprungfeder in alten Geberit-Toiletten aus den 80er Jahren.
This is a replacement part for the "stopper fixture" of a Crush Grind Shaft Mini grinder. This part snaps into the head of the grinder and holds the rod firmly with a split ring. It was modeled after my Lyngby salt grinder which appears…
A simple, homemade replacement for a balcony door handle, designed for a standard German door (though similar models may exist internationally). Please note: this model only replaces the broken handle/cover part. The base holder, into…
Ein Drehgriff für M8 Inbusschraube mit Mutter zum Einpressen.
Description: The StealthGrip Cable Clip, a solution for neatly securing 8mm thick round cables in a semi-concealed manner. Say goodbye to messy cable arrangements and hello to seamless integration with your décor. This clip offers…
A very simple design to prevent coffee beans from popping out of the Crushgrind hand grinder. The design slightly snaps onto the top of the hand grinder. It also allows the handle to still be stored on the grinder along with the pop…
I made this tool for a friend that's into wood turning. It's used to set tool depth in a jig before it gets put to a grinding wheel for sharpening. Mainly to ensure consistency every time it's sharpened. This means less metal from the…
This handle completely replaces the existing, uncomfortable rotary handles on the Hammer A3 31/41. One model serves for both handles. An M8 nut is press-fitted for height adjustment.
Customized version of http://www.thingiverse.com/thing:1074513 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1074513 Instructions Using the following options: topFlare = 15 diameterOfBase = 26 topHeight…
The Geek Card was designed and printed for Thingiverse superstar @mathgrrl in appreciation of her inspiring 3D Printing blog http://makerhome.blogspot.com Every time I read the blog I come away with a new 3D printing idea or tip.…
hi - I did a complete rework of the Rösle Vision G3 gas-grill! This is a 50mm 1to1 replacement part for the rubber of the original handles. In addition i did a new 52mm diameter version with thicker rubber inlay. The sanded surface with…
Useful splash shield for easy snap-on onto an E61 brew group
Drip cup Bravilor Bonamat FreshGround
The main body is not changed (original file included). Push pin made of 2mm nail (cut to required length). Pin made of 2mm wire. Used spring found at home (probably from some mechanical pen). I printed it in Sunly/Jayo silk filaments on…
Very help end stops to keep your Titan 25T's bearing blocks from rolling off the rail.
Spare part for VW Caddy pull handle. I printed it in ASA with 5 perimeters. You need one m8 countersunk head screw and one m8 nut.
High quality model of MONOLITH / WISHGRANTER from the game S.T.A.L.K.E.R. 2 Высоко качество модел монолит / исполнитель желаний
This is a remix of the Ender 5 Stealthburner Linear Rail Mount, modified to work with the standard Ender 5 Plus carriage and an HGR15 linear rail and bearing block. Features: Mounting interface for HGR15 linear bearing block (26x26mm bolt…
Wichtig: Nur mit gezeigten duschgriffen kompatibel Print Settings Printer: Anycubic i3 Mega S Rafts: No Supports: Yes Resolution: 200 Infill: 25 Filament: Sunlu PLA+ White Category: Bathroom
Since I needed to make my MPCNC more rigid I wanted to give etotheipi's files a try, but first I had to modify them to fit my Primo F (25mm) version. Everything works fine and rigidity has increased greatly, but there is also one…
