Counting matching models…
Throw lever for the focus on a Hikmicro SQ50L 3.0 scope, might also fit others with focus ring size around 69mm You will aslo need a m3 screw and nut I printed this in PETG, but TPU is probably better
This is a camera cage and tripod adapter for the HIKMICRO Mini2Plus V2 thermal imaging camera module. The combination of a thoughtful design and a specific material choice results in a ¼-inch mounting solution that is both easy to print…
Use with an 18mm ZnSe Lens. I've used the MCWlaser 18mm PVD ZnSe CO2 Laser Fokuslinse from Amazon.de, you may find similar lenses somewhere else. 5cm focal length results in an area of around 3*4,5cm which is in focus. Other focal lengths…
HIKMICRO TQ35 2.0 Honeycomb 6mm or 5mm killflash no need to put down lens cover used screw M3x40 + nut Print settings: 0,2 mm layer 8 walls no supports
For use with the Hikmicro B20 thermal imaging camera as a replacement for the original part. ZnSe lens purchased on Aliexpress. Diameter 20mm, Focal Lenght 50,8mm https://a.aliexpress.com/_mKCBpWG Printing was done on SLA printer. But I'm…
This is a case for the HIKMICRO Mini2 thermal camera, with a sliding 20mm macro lens holder. A 20mm ZnSe CO2 focus lens is needed for this project. I used a 38.1mm focal length. Printed in PLA, 0.10 layer height Instructions: Fit the…
A small case to protect the USB-C thermal camera, Lens is protected and fits in any focus position. The camera snaps in without too much force but is safe from falling out. print in PLA or PETG (I recommend the latter for…
For Christmas I gave myself an inexpensive thermal imaging camera. So I got it 10% cheaper. I am very satisfied and it is more than sufficient for my needs. Except for the precise diagnosis of pcb electronics. I found a suitable solution…
Dvě verze krytky hlavní čočky objektivu monokulární termokamery Hikmicro Lynx Pro LH25. Průměr čočky 25 mm. Tryska 0,4 mm Výška vrstvy: 0,2 mm FLEX filament 98A --- Two version of caps for main lens for monocular thermal camera Hikmicro…
make it in 100% tpu to make last.
This is a easy to print protection cap for the Hikmicro E-01 Thermal Camera. I printed it with TPU 95A. No supports needed. Just use a rubber band to fix it. If someone has a 3D-Scanner, it would be very nice to get a good 3D scan of the…
It was made for the Hikmicro Alpex 4k, it might need some extra help and an extra screw for the leaver. Screw is an M6x1 with an square lock head, and should be about 55 mm long, something like the one on the photo. The whole thing work…
printed in TPU 100% infill. to bee strong. all you need extra is a m6 bolt and a nut. so easy to adjust the scope.
printed in TPU it needs to be flexibel and strong. printed in 100%infill.
Case with 1/4'' Screw Mount and Macro Lens for HIKMICRO MiniE Thermal Imaging Camera Features a 1/4'' Screw Mount with a reserved height of 6 mm Accommodates ZnSe focusing lenses with dimensions ≤ 19 mm diameter and ≤ 2 mm thickness For…
I've lost my cover for Thermo scope HIKMICRO TE19 2.0, diameter 45mm so i've made new simple one to cover front lens. Nothing fancy but usable and can be printed without support. I've drilled/cleaned pin hole after print, due small…
It was made for the Hikmicro Alpex 4k, it might need some extra help and an extra screw for the leaver. Screw is an M6x1 with an square lock head, and should be about 55 mm long, something like the one on the photo. The whole thing work…
Needed cheap and fast mount for my HIKMICRO TE19 2.0 to picatinny rail Printed with 0.2 layer height, PET-G, 100% infill on FLSUN V400 recommended to print on 90 degrees for strenght
Mit diesem Zubehör lässt sich die Fokussierung der Hikmicro LH25 2.0 leichter bedienen, insbesondere wenn man Handschuhe trägt. Ich habe zwei Varianten erstellt. Eine mit Schlitzen für eine verbesserte Audioaufnahme, obwohl die Mikrofone…
The original focus ring on the Hikmicro Alpex Lite can be difficult to operate. It turns stiff and is almost impossible to adjust smoothly when wearing gloves. To solve this, I created my own improved focus ring. This custom-designed and…
I've lost my cover for Thermo scope HIKMICRO TE19 2.0, diameter 45mm so i've made new simple one to cover front lens. Nothing fancy but usable and can be printed without support. I've drilled/cleaned pin hole after print, due small…
Needed cheap and fast mount for my HIKMICRO TE19 2.0 to picatinny rail Printed with 0.2 layer height, PET-G, 100% infill on FLSUN V400 recommended to print on 90 degrees for strenght
Printed with PETG, 0.08mm layer hight, 15% infill No supports required
