Counting matching models…
Introduction The Dakar rally is an over two week long endurance race with a total length of up to 8000km. Introduced in 2022, the Hilux T1+ is a purpose-built rally truck built for the Dakar rally. By 2025 it has certainly proven itself,…
This is a dashboard switch-hole cover plate for various older Toyota trucks and SUVs. The original came from the other thingi site, item number 2446920 by bgsteveg . I improved it by adding some gussets to keep the tabs from cracking off.…
Summary This was a personal project, trying to model my old 91 Toyota Pickup/Hilux (1.5 cab, V6). It is not perfect - mainly in the grill area, and the wheelwells, but the proportions are modeled with help of side, front, and top view…
Rear bumper with new holder for RC car model WPL C24 Toyota Hilux. Bumper is from the source: https://www.thingiverse.com/thing:2970496 The bumper bracket is completely new.
Print Solid, I used ABS. I have been using on my Hilux for 7+ years, has not broken yet. Although the clipping tongs look small, they hold the arm in place no worries. Photo's taken after 2 years of use. Category: Parts
A Hilux badge with hollow back for glue.
This is a camper that fits in the rear bed of the Tamiya RC Toyota Hilux High Lift. This fits over the top of the stock light rack. I left out the windows as I thought it'd be better to cut out clear plastic so you could see into the…
Cup holder insert for Toyota Hilux. This should fit most, if not all 1997-2005 models, but it's safer to just check if the center console looks the same (I'm assuming Toyota doesn't have two slightly different center consoles) It's…
All 3d files should be free. Enjoy this 2 door mount for the Mojave onto a VRD. Print with alot of walls for strength if needed.
I love uploading car parts. Great fun altogether. Maybe some day it will be possible to download a complete Toyota Hilux 1:1 scale Hilux and print it from metal. Make sure you print the bottom part on it's side, I have included some 0.4mm…
This is the dashboard switch cover. The model is designed based on the original cover from my 2002 Toyota Tacoma. It should also fit Hilux/4Runners/T100 as well. I've pictured the printed version next to my original one. To withstand the…
Best made with PETG, but PLA works too. 6 layers bottom and top. 5 perimeters.
Toyota Hilux tonneau cover brackets and clips tend to crack or break over time as they are usually in the sun become brittle and break. You cant get these parts loose and a new tonneau cover is $$$. Print replacements, and use them as the…
This is a model of the genuine Toyota part that helps redirect oil draining from your sump. It slots in between the sump and the bar that runs below it, to stop oil splashing onto the bar. This model is slightly oversized, as the vehicle…
Toyota Hilux N80 UHF Radio Microphone Dash Mount Keep your UHF radio handset within easy reach with this clean, purpose-built microphone mount designed specifically for the Toyota Hilux N80 (2016–2025). This is a completely original…
this is a 3D print replacement for 79-83 TOYOTA Hilux (RN30, LN40) and Corolla (E70, KE70, TE71, TE72) grill lock clip on these old Japanese cars, this item often overlooked, it's commonly gone or broke and just replaced by zip-ties or…
A friend had a broken dash panel on his old Hilux and wondered if I could replace it. A bit of 3d modelling later and it fits perfectly. I printed this .8mm thick, with two bottom layers in white and two top layers in black, and then…
Replacements for the thin rubber strips originally glued to the underside of the battery hold down bars on the 3rd Gen Toyota Hilux-Surf along with 4runners & Tacomas of similar vintage. May also fit earlier/similar models but you would…
WPL C-24 steering system C24 Hilux C-14
Model requires greater than 225mm print bed, but this was meant for a third gen Toyota Pickup/Hilux, but likely fits other Toyota of the era with minimal fitting. I recommend keeping your infill/walls high and running your print speed…
I broke the key for my Toyota Hilux sr5 2005 KUN26R. I could not find one on Thingiverse so I drew it up in fusion 360 and here it is. The TPU buttons needed a little trimming with flush cutters to ensure it wasn't too tight. I upload v5…
This is a custom 3d printable centre console for your Gen2 Hilux/Surf/4runner. !Disclaimer! this is based on a manual swapped R151F gearbox Gearbox depicted and modelled around has had the transfer case shifter swapped with the A343F…
Toyota Hilux Arctic Trucks as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
Replacement dash vent for the center vents on a Toyota Hilux, mine broke so I came up with this. Printed originally in PLA, it has warped in the heat. Recommend printing in PETG/ABS. Cheers
A frame to stop your phone sliding around while driving for the N90 Toyota Hilux. Suits phones upto 162mm long. I suggest using PETG or something similar for a bit of extra heat resistance. When printed in black its almost invisible.
Small removable coin holder for a Toyota Hilux. My toyota does not have a compartment that can be used to store coins, so I made this. Printed it with PETG so it will survive a hot sunny day.
I printed in pla and painted
ender3 pla ht100 Raft yes organic pasuje po vyřezání nitřní části korby.
The lift kit from the original file was a bit too much for me, I didn't like the look. Edited the file for less lift. I then wanted more flex on the rear axle and came up with the revolver type shackle. It gives alot more flex. You will…
Just a Hilux shaped keychain. I wanted to make the keychain hole looked like a tow hook on the back of the Hilux so the keychain hole is small. It's suitable for small keychains only
Toyota Hilux/Surf/4runner Gen2 cup holder to fit the factory centre console that can hold 2x drinks, 2-3 rocker switches, USB charger and a phone holder cupholder has 2 variants (only difference is with switches) fit 3 rocker switches and…
I wanted more realistic deeper bed for my Hilux. Ended up with “bed liner” look solution, easy to add afterwards. I added tool for dremel to cut straight line. I made a cut about 8mm under top part of bed. Add “tool” to dremel, adjust cut…
Made a cupholder insert that fits a 500ml monster can
Front and rear bumpers. For the rear bumper print also rear end to frame rails. My other Hilux mods https://www.printables.com/model/1221617-tamiya-hilux-hilift-bumpers…
A snorkel cover suitable for Toyota Hilux 2015-2025 and other models with a similar design of snorkel. Based on the original Toyota design. When printed in black it looks very similar to the original part. It's a little rough - the design…
Tamiy Hilux Hi Lift inside fender Mirror in slicer for other side. My other Hilux mods My other Hilux mods https://www.printables.com/model/1221617-tamiya-hilux-hilift-bumpers…
I though the separated hood looked a little funny, so I combined it with the main body. print with supports its tight, so be strong and gentle. Consider printing upside down for less post processing? I printed mine right side up.
Tamiya Hilux HiLift chassis base Easy to instal body shell and a lot of room for electronics. All my HiLift mods https://www.printables.com/model/1221617-tamiya-hilux-hilift-bumpers…
Very detailed with small parts. Meant to be printed in full color or on a resin printer such as the Prusa SL1S.
If your door stopper is old it can loose its shape and compress/wear over time and this contributes to a rattly wheel carrier. The hinge pins on the carrier do wear out over time are are not replaceable (at least not officially/easily)…
3"(76mm) air intake adapter for Toyota Hilux gen5/6 and Volkswagen Taro with a flange for breather hose. Made especially for Biltema sports air intake filter, but any 76mm filter will fit.
i broke the plastic housing to my hilux 2005-2015 key fob (MDL B41TH) this is a printable one that uses m3 inserts and screws( when i have time il make a ver that uses nuts instead) you will need 5 inserts, 4 m3x 6mm screws and 1 9mm…
cover those 2 extra holes with the tow hook cover
80's Hilux Cold Air Intake: I've got an old 86 2wd Hilux that the previous owner has routed some pipe to the rad support and jammed it through a hole I made a surround to better mount the pipe and gave it a beveled edge to ‘improve…
Tamiya Hilux HiLift transmission mount for this aliexpress model Also mount for standard battery between frame rails. All my HiLift mods https://www.printables.com/model/1221617-tamiya-hilux-hilift-bumpers…
After just 30 years, the vent pin in my VW Taro finally cracked and gave out. Since I couldn’t find the part anywhere, I designed and 3D-printed a replacement. It should also fit the Toyota Hilux V / 4Runner. Hope this helps keep your…
hpi venture 18 hilux trailer hitch mount on the original rear bumper 2x M2x8mm 2x M2x6mm with hex nuts bumper mount - 2x M2x8mm hitch mount - 2x M2x6mm 4x M2 hex nuts
This tool can be used to install or remove the tonneau cover lock ring with ease, and without damaging the ring or tonneau cover.
It is a road madeto fit the car in it
These brackets can be used to install aftermarket speakers to a 4th gen Toyota 4Runner / Hilux Surf 2003-2009 (N210). The design is extra sturdy so that PLA can be considered as well. The brackets support standard size 6x9" and…
i made it in PETG 100% infill
brackets to mount a Oricom UHF305 in place for your ashtray in your Toyota Hilux/Surf/4runner Gen2 1989-1995 for a slim tucked away placement and easy access 2x M2 bolts and respective washers required
Pièces permettant de rehausser la carrosserie des modèles cité plus haut. Elle évitera que les pneus reste coincé dans la carrosserie lors de passage serrer. Pour la solidité, imprimer en 0.2, 5 périmètres, 15% de remplissage en nid…
Toyota Hilux 2005-2008 Front Bumper Fog Light Blanking Plate This is a 3D printable fog light blanking plate designed for the pre-facelift 7th generation Toyota Hilux from years 2005, 2006, 2007, and early 2008. It covers the empty fog…
I made this to fit into the blank so you can add a switch for some lights. it suits the Toyota small switches
Needed for weather protecting the tub with the cover. I would recommend to print this out of ASA or PETG if no other coat is applied as it will be in the elements. Any help to remix this to make printing easier without supports would be…
