1 / 4
Toyota Hilux (2005-2008) Front Bumper Fog Light Blanking Plate / Cover — image 1
1 / 4

Toyota Hilux (2005-2008) Front Bumper Fog Light Blanking Plate / Cover

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Blanking plate for Toyota Hilux bumper. 2005-2008

Rating
0 / 5
Likes
2
Downloads
2
Makes
0
Views
40
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Toyota Hilux 2005-2008 Front Bumper Fog Light Blanking Plate

This is a 3D printable fog light blanking plate designed for the pre-facelift 7th generation Toyota Hilux from years 2005, 2006, 2007, and early 2008. It covers the empty fog light hole in the front bumper, protecting the interior wiring from dirt and water while making the front end look clean.

Compatibility
This part fits Toyota Hilux N70 pre-facelift models from 2005 to mid 2008. It does not fit the late 2008 to 2011 facelift models or newer versions because the bumper design changed completely in late 2008.

Mounting Instructions
This part does not have ready made clips. To install it, you need to either glue it in place from behind the bumper or drill holes into it to use screws or zip ties for mounting.

Print Settings
You can use either PLA or PETG for this print. Personally, I have had great success using Bambu Lab PLA, and this printed part has already lasted perfectly on my own truck for 3 years in everyday use. Setting 3 or 4 perimeters will do fine to give it enough strength against stone chips, and you can choose the infill percentage as you like.

If you do this, please share a photo with me.

Tags