Toyota Hilux (2005-2008) Front Bumper Fog Light Blanking Plate / Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Blanking plate for Toyota Hilux bumper. 2005-2008
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Toyota Hilux 2005-2008 Front Bumper Fog Light Blanking Plate
This is a 3D printable fog light blanking plate designed for the pre-facelift 7th generation Toyota Hilux from years 2005, 2006, 2007, and early 2008. It covers the empty fog light hole in the front bumper, protecting the interior wiring from dirt and water while making the front end look clean.
Compatibility
This part fits Toyota Hilux N70 pre-facelift models from 2005 to mid 2008. It does not fit the late 2008 to 2011 facelift models or newer versions because the bumper design changed completely in late 2008.
Mounting Instructions
This part does not have ready made clips. To install it, you need to either glue it in place from behind the bumper or drill holes into it to use screws or zip ties for mounting.
Print Settings
You can use either PLA or PETG for this print. Personally, I have had great success using Bambu Lab PLA, and this printed part has already lasted perfectly on my own truck for 3 years in everyday use. Setting 3 or 4 perimeters will do fine to give it enough strength against stone chips, and you can choose the infill percentage as you like.
If you do this, please share a photo with me.