35 models
Designed for use with my rig but maybe useful to a desk or other situations. Printing: I used PLA, and printed it the simplest way: pointing straight up with maybe 25% infill. That'll work fine if your printer has good layer adhesion.…
Not so much a remix really as a recreation using http://www.thingiverse.com/thing:1619580 as a template. I made it a little bit tighter because I had the feeling that with a bit of flex the headset could perhaps push the arms aside and…
Enclosure for the GC0308 camera module for inexpensive face tracking for VR. You can find the camera module online for roughly $15-20. The enclosure snaps together without hardware. This is designed to work with HTC Vive Face Tracker…
These are extra parts to turn my HTC Vive HMD Wall Mount Lite and HTC Vive controller wall mount and charging station into a full all-in-one wall mount for the HTC Vive that needs only 3 screws to fasten instead of 6. The above parts can…
This is a minimalist wall mount for the HTC Viva HMD. This is a remix from the original design by rigelbot , available on thingiverse . It was also inspired by the redesign by Quintesse , available on PrusaPrinters . This version has a…
Designed to accommodate the depth of the Pimax Crystal (Light), but it should work for almost any HMD. (Not suitable for PSVR2 due to how the visor is attached to the halo + the facial gasket is so soft it might hit the lenses). Spreads…
Adapter to attatch a fluxpose tracker onto a Quest 3 HMD
I did not create this. All credit goes to the work "decent index station" made by satanclauseu on thingiverse . Decent Index Station by SatanClausEU is licensed under the Creative Commons - Attribution - Non-Commercial license. I…
Adapter to attatch a fluxpose tracker onto a Quest Pro HMD
This fan duct is designed for Snapmaker J1 parts cooling and heat break cooling. Cooling performance is improved by using a 5015 blower fan. *However, the cooling performance is slightly inferior to the previous version. But, cooling can…
Case for the phone HMD Fusion. No Support needed PLA used You will need a sheet metal screw 2,4x9mm or equal Thanks to HMD Global for the toolkit: https://www.hmd.com/de_de/fusion-development-toolkit-download
Adapter to attatch a fluxpose tracker onto a Bigscreen Beyond HMD. Needs two 4x1.5mm magnets
Adapter to attatch the fluxpose tracker onto a Valve Index HMD.
Wide clamp style desk hanger for Virtual Reality HMDs. 20mm clamp gap.
PLEASE READ THE TEXT FILE CONTAINING THE SCREEN FLIP INSTRUCTIONS! MAKE SURE YOU FOLLOW THE PRINT ORIENTATION PICTURED FOR THE BRACKET FOR MAXIMUM STRENGTH. That being said you just need to comment out two lines in the sovol config to…
Adapter to attatch a fluxpose tracker onto a Pico 4 HMD
this is a fork of printables.com/model/1507930-psvr2-replacement-facial-interface-with-optional-i i fxxxking hated how the mask clips was designed so silly, because i printed the mask and broke it immediately. so redesigned a bit and made…
Hi there, i slightly edited this model so the holes can accept and sink a 4mm screw to use with 5 mm plugs. in the second photo you can see a combo with a remix i made for a Vive controller wall mount you can find here:…
Adapter to attatch a fluxpose tracker onto a Quest 2 HMD
Modeled from scratch in Fusion 360. I'd print with at least 4 perimeters and with the orientation as shown in the model view to ensure rigidity. The one pictured was printed in PLA. Doesnt show any signs of flexing or breaking. The…
case ring for the "maker phone" HMD Fusion PLA You will need a sheet metal screw 2,4x9mm or equal Thanks to HMD Global for the sample CAD Data https://www.hmd.com/de_de/fusion-development-toolkit-download
Case for the phone HMD Fusion No Support needed You will need a sheet metal screw 2,4x9mm or equal Thanks to HMD Global for the toolkit: https://www.hmd.com/de_de/fusion-development-toolkit-download
Case for the phone HMD Fusion No Support needed You will need a 30mm wide elastic band and double sided tape for finger sling version NEW: you can make infill patterns because multiple bodys in the files You will need a sheet metal screw…
Loop to attach to the head straps on a Valve Index hmd to allow hanging from hooks with the lens facing up. I've made it a tight fit so it wont wobble around while using the hmd. Updated to a version 2 with a rounded end instead of a flat…
This is a weight splitter for Pimax Hmd's with stock headstrap. I think you can use it without my upgrade https://www.thingiverse.com/thing:3903415 but always better with. Just cant do without now. INSTALLATION : Remove headstrap from…
Couldn't find simple hanger for my HMD. Used my headphone hanger as a base and created this model. Should print without any support. Recommended 3-4 walls for rigidity.
just a quick edit that deletes screw holes and reduces the baseplate thickness. (I have a preference for mounting tape)
It seems that when regenerating the inclusion zone model to fix the issue below, they introduced a new issue where the inclusion zone model covers the cameras: https://github.com/ValveSoftware/IndexHardware/issues/2 If you check the…
This is a simple wall holder for HMD T21 pad. There is no screw holes as I used double sided tape.
Halter für (Omno) HMD auf einer Skadis Lochplatte Holder for (Omno) HMD on Skadis
So close to real that it's virtually reality. Category: DIY
Designed to accommodate the depth of the Pimax Crystal (Light), but it should work for almost any HMD. (Not suitable for PSVR2 due to how the visor is attached to the halo + the facial gasket is so soft it might hit the lenses). Spreads…
Halter für (Omno) HMD auf einer Skadis Lochplatte Holder for (Omno) HMD on Skadis
Holds HMDVR so that it fits in the large side pocket on the Quanum V2 goggles. Category: R/C Vehicles
