Counting matching models…
This collection will be updated with new models from time to time! Ideas and suggestions on sizes and features are welcome! For full collection and editable STEP files, please purchase the full pack from here: Full Pack Download Modular…
Many parts of the Mini benchdrill are designed for PLA filament. A few parts are designed for heat-resistant filaments (Petg, ABS, ASA). Assembly steps and details are shown in the video. This design has an automatic start-stop feature…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
Compact hobby knife with hidden storage. storage for blades cover cap keychain size Section analysis: UPD: Add file “Standart size handle.stl”
Bring a touch of Middle-earth magic to your garden, bookshelf, or diorama with this enchanting Hobbit Fairy House ! With its curled leaf-style roof, rounded stone walls, quirky chimney, and clusters of mushrooms guarding the door, this…
Hobby Tool Holders This is an initial set of compact hobby tool holders the purpose of which are: Short term tool storage for tools being used on an active project Organization to help keep the bench cleaner To help facilitate rapid tool…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Print your own Hobbit house. Please publish your makes. Check out my larger Hobbit house:
Hello, Welcome to my profile, full of models and miniatures :-) I have for you Hobbits, dwarf, gnome for an exhibition or a diorama. Very nice figures. They are suitable for coloring. My children absolutely love them :-). Important: If by…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Newer Version Available https://makerworld.com/en/models/1187363-minivice-x2-series-modular-mini-painting-handle#profileId-1198569 Made many improvements. Leaving this version up as its still useful and works well. Newer version is more…
Calvin and Hobbes, from the comic strip by Bill Watterson. The comic strip Calvin and Hobbes follows the humorous antics of Calvin, a precocious, mischievous and adventurous six-year-old boy, and Hobbes, his sardonic stuffed tiger. The…
I've been thinking of making a better utility knife until I came across @PaskMakes knife he made out of brass, I used his stencil in fusion_360 and 3d_printed my own version. Print instructions you will need x1 slandered utility knife…
Calvin and Hobbes, from the comic strip by Bill Watterson. The comic strip Calvin and Hobbes follows the humorous antics of Calvin, a precocious, mischievous and adventurous six-year-old boy, and Hobbes, his sardonic stuffed tiger. The…
This is a digital 3D printable model of The Key to Erebor from The Hobbit . The download contains a 3D model ready to be 3D printed on a 200 mm print bed. (STL) SIZE At 100% scale, the model’s dimensions are approximate: Width 133 mm…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
General purpose hobby craft syringe to apply glue, grease, cake-icing, paint and other liquids into difficult to reach places. The syringe has a fine extrusion however this can be opened up by shortening the nozzle with scissors. Regular…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Here's my version of the one ring from the LOTR books/movies. It is 24.5 mm in diameter on the inside so scale it according to your fingers. Be sure to check out my other models If you like my work you can buy me a kofi,…
After searching online I came across some poly resin forceps that I wanted to print and was surprised to find that there weren't any that were properly modeled. This has been tested on a .4mm and .6mm nozzle and prints under 20mins on my…
Gandalf from the Rankin and Bass version of the Hobbit.
Designed to fit #11 HOBBY / XACTO type blades. ***XACTO BRAND SPECIFIC DESIGNS JUST ADDED BE SURE TO CHECK YOUR BLADE MEASUREMENTS FOR THE PROPER FILES*** No supports needed. No hardware needed. Recommend printing at 0.1mm or 0.08mm when…
This is a little 50mm (dia) x 60mm tall can for disposal of old/used hobby and utility/box-knife blades. It's sturdy, strong (even when printed in PLA), and printing it should be relatively quick and inexpensive. I had a growing pile of…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
A battery tray to securely hold the stock battery (Spektrum S3 2200mAh) in the battery compartment of the Carbon Cub S2 1.3m RC airplane.
Calvin and Hobbes, from the comic strip by Bill Watterson. This is a onepiece version of Calvin and Hobbes based on my multi-part Calvin and Hobbes model that I've previously posted (currently only on myMiniFactory and Cults3D). I teamed…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Print your own Hobbit house. Please publish your makes. Check out my smaller Hobbit house:
This is a 3d printable propeller for the Hobbyzone Sport Cub S V2. I find the plane going faster with my propeller than with the stock one. Print settings: No supports 0.10 layer height (Brim)
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Bilbo from the Rankin and Bass version of the Hobbit.
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers
v2 Update Added anti-roll flange, which also doubles as a flat surface for those who want to print this sideways. The updated design accommodates #17 chiseling blades. ___ Yet another hobby knife safety cap. Unsatisfied with the available…
This Bonsai Terrarium pot are for those who love indoor plants and Lord of the Rings. I had a lot of fun designing this and I hope you enjoy it too! === Print Settings: Nozzle - 0.4mm Layer Height - 0.10 Infill - 5-10% Supports Needed for…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Multiboard Holder for your Pen, Knife, Sharpie or Pencil. This prints perfectly without any type of support. I designed this to be right in the sweet spot so it can be used for multiple items. The opening is 11mm wide. The unit is 45mm…
Introduction " I will give you a name... and I shall call you Sting . " —Bilbo Baggins Forged in Gondolin for the goblin wars, this sword was used extensively in the prestigious careers of the burglar Bilbo Baggins and his nephew, Frodo…
This is a work in progress release of my take on the short sword (dagger) Sting, from the Hobbit and Lord of the Rings. It's overall length is 560mm (22") with a blade of 380mm (15"). As of this release there are no elvish writing on…
Stanley Knife N°199 comes without any protection, so I made my own belt holster. I have done several iterations, but v5 works by far the best. Designed in Onshape:…
Background I had a look around at the different holders that are out there. And even though some had some good ideas I felt none of them solve the problem for me. So I created this remix based on 2 holders and added my own ideas. There…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Perfect for the man cave/hobby room! There are 4 versions, 2 with holes in the corners, 2 without holes and with different fonts. Measures 18 x 11 x 3.3cm
Trays were designed to with this hobby knife kit in mind. Just like the original model this was inspired from you need magnetic strip like this . Printed on an MK3s with 0.6mm nozzle 10% infill and 0.3mm layers
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Thin Hobby Xacto Knife Features compatible with no11 blade blade cover include Print Instructions be careful this is a very tight fit, your printer must be well calibrated the classic perimeter generator produces better threads for best…
This 1x1 gridfinity block holds a pair of side cutters, a hobby knife, and angled tip tweezers.
Easy to print. No supports needed, 3 parts. Click door into frame. Can be opened. Can be placed against skirting board, on tree or in dollhouse. Think of other applications yourself.
I am working on a gearbox for 3v hobby motors, and needed a model of those motors to design around so I made this one. I worked with the drawing from here , which is partial and may not represent all variants of all manufacturers. I did…
Second of the modular paint racks to store and organize hobby paints. This one is an inside 90 degree corner to help with wrapping around your work station. I designed this to hold Vallejo or Reaper dropper paint bottles. I will be adding…
Use case This versatile combination of angles and thumb screws can hold almost any oddly shaped part that needs some work on. The original idea was to hold loose AA batteries to weld the contacts to them. Try that without a frame, it will…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
The small parts organizer “Basic33” / VarioPlus Hobby 33 (old version with flat frontface) by Allit is often sold via supermarkets like Lidl as a Parkside product and Aldi and Hofer (Austria) as a Workzone product. They come with a very…
This holder is great for tweezers, pin vise, small screwdrivers, toothpicks, finger cots, rodico, springbar tool, hand press tool, oilers, spudgers, etc. It has a small bin in the front for tools or parts that are in use. Great for…
Hobby Xacto Knife with Blade Container Features blade container interchangeable handles compatible with no11 blade blade cover include Print Instructions be careful this is a very tight fit, your printer must be well calibrated the…
Designed this Gridfinity tray to store the four knife handles I have as well as extra blades held on a .5 inch X .062 magnetic strip. Space on either side of the magnet strip is angled to allow you to push a blade down from either end for…
Hobbits Fairy House – Whimsical Miniature Step into a storybook with this charming Hobbits Fairy House – a cozy little haven straight out of the Shire, reimagined with fantasy flair! Featuring a swirled round door, mushroom-lined stone…
This is the first in a line of modular paint racks to store and organize hobby paints. I designed this to hold Vallejo or Reaper dropper paint bottles. I will be adding more shelf layouts to hold paints such as Miniataire, GW and others!…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Remix of standard servo mount to allow lego compatible pieces to fit on standard yellow DC TT hobby motor with gearbox. Good for hobbiest robotics projects. I use it in my High School robotics class to connect the microbit/raspberri pi to…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
This is a stand for the cheap hobby style glue guns. The stands I could find on Thingiverse were all for more expensive kinds, this one is for the kind sold in craft stores and on internet auction sites. See picture. Prints without…
A stackable, wall mountable, modular rack for hobby paints similar in size to Army Painter and Vallejo paints.
Retractable Xacto Knife Features compact with retractable blade compatible with no10 and no11 blade Print Instructions be careful this is a very tight fit, your printer must be well calibrated the classic perimeter generator produces…
Ein Scale Batterie Gehäuse für den Power Button eines Hobbywing Fusion. So könnt ihr den Schalter als Autobatterie tarnen. An einer Seite bleibt der Schalter entweder offen, oder ihr klemmt das Rückteile in die Öffnung wo das Kabel raus…
Third of the modular paint racks to store and organize hobby paints. This one is a smaller straight section. It is half the size of the large straight section. I designed this to hold Vallejo or Reaper dropper paint bottles. I will be…
Print your own Hobbit house. Hollowed out per request so that lights can be placed inside. Please publish your makes. Original model:
These units are made to stack on each other allowing for very efficient storage of (exact, pen knife) hobby knife storage Note: Add strip magnets to the blade holder to hold the blades in place. Ex: https://amzn.to/3woBb6U
Hobbes Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab so…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Hobby knife with a finger loop for more precise and delicate tasks. It was inspired by one I saw on Amazon but designed it from scratch/remixed it from the Inexacto Hobby Knife. Print the modified sleeve if the blade is too loose. It's…
Just painted the awesome model Reddadsteve made in PrusaSlicer using the MMU paint feature. Hopefully this can save others some time. Please note that the print requires that you change the Brown (log) filament to Red before it gets to…
Organizer for holding two bottles of Micro Sol and Micro Set. Also hold two Tamiya type square bottles. Holds two Tamiya tweezers, two scalpel handles, two brushes and Tamiya decal scissors or equivalent.
When I upgraded my TRX-4 ESC to a Hobbywing 1080, I found several mounting plates, but none had an external lever switch like I had been using with the original Traxxas ESC. I've combined Puredeath's excellent TRX switch(…
Replacement Propellerblade for Hobbyking Warbirds Motivation: Hobbyking has/had a lot of great RC PNF Warbirds, but sadly they and their replacement parts are out of stock. Because of that, my bird (P51 Mustang) and the ones of my friends…
https://cults3d.com/en/3d-model/game/the-hobbit-inspired-chess-set-fantasy-3d-printable-chess-pieces This chess set is inspired by The Hobbit fantasy universe and reimagined as stylized chess pieces. Each figure is designed with a classic…
A 1×1 Gridfinity tool holder for a Silverline 248844 Deburring Tool , 5 spare tips, an OLFA AK-1 Hobby Knife and a set of OLFA KB spare blades box . This model should also fit your standard X-Acto blade knife and other deburring tools.…
Decorate your garden with this cute little hobbit door, or use it as a fridge magnet. The door can be opened, so you can hide a key or secret message inside! The door handle can swivel freely, but it's small… so be careful! I originally…
Organizer for scale modeling painting. Holds Tamiya bottles, Mr. Hobby brush cleaner bottle and all kinds of brushes and scissors.
Scale battery for hiding your Hobbywing Fusion start button. You can hide it in plain sight. If you want. I printed the moving part with resinprinter and medium transparent resin. The button led still faintly shows. But if you dont mind…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Mount for the Hobbywing Max10 SCT within a Traxxas Rally/Slash with a LCG chassis. There's a cutout for the temp sensor as well as it's pretty close. You'll need one M3x8mm and M3x12mm for mounting. The ESC and switch should friction…
Holder for Mr Hobby / Color Glue Bottles Print instructions Category: Art Tools Summary Holder for Mr Hobby / Color Glue Bottles Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.3 Infill: 10%
Hex design Toolstand V1 for 7 RC / Hobby Tools / screwdriver with parts tray. If you like my designs and if you want you can support my hobby by clicking the links below and maybe you want to buy some tools for this tray. Please don't…
I was looking for a Fiskars hobby knife holder for #gridfinity but couldn't find one. So I remixed kaspertulstrup's x-acto knife holder to fit the bigger Fiskars version. Gridfinity is the ultimate organizer for your whole workshop! Zack…
If you like what I do and are interested in supporting my efforts to create free board game models, then check out my patreon: https://www.patreon.com/warehouseworkshop Patrons have all my models available in one place. You will also have…
This is a re-upload of the Megami Device Chassis files made by PoofybirdDesign but were unfortunately deleted at some point. I have not personally made these files, so I cannot answer any questions on them, I am just trying to make them…
Speed Sculpt : https://youtu.be/MlHBcwbFTQk My Youtube Channel : https://www.youtube.com/c/BODY3D My Facebook : https://www.facebook.com/B0DY3D/ TEAM BODY3D : https://www.facebook.com/groups/492474174608397/ My PortFolio :…
I liked the honeycomb desing from the remix on Thingiverse, but i wanted to use M3 screws. They are like 1mm out of the side walls because the walls are 3mm thic The differences with the remix design are: Smaller screw holes to fit M3…
OMPHOBBY M2 EVO CANOPY OMP HOBBY M2 EVO CANOPY
Print the part with 0.4 nozzle, 0.2 mm layer, pla of other material. Assemble by placing a piece of copper wire or a piece of filament in the hinge. The window can be fitted with glass by placing a cut-out piece of mica or plexiglass in…
Drop chute,cargo door suitable for a RC Bushmule from Hobbyking (Avios). The Bushmule has a cargo door built in as standard. I did not like this design and I have designed a new one This one fits exactly into the hole from the cargo door.…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Why? I didn't like the usual adapters that mount the ESC to the floor of the central chassis, because you always have to angle it upwards. In hard crashes it wobbled around. Additionally I needed the space in the central chassis pit to…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyTerra Fossil Grey Transmission Distance: 0.3 PLA+ Sunlu White Transmission…
