Counting matching models…
The original Low Poly Horse posted by H3phaestus42 had some triangles on the bottom of the horse's feet with minimal surface area contacting the build plate, which made the legs unstable while printing. Using Meshmixer , I sliced off the…
Print approx. €3.39–€4.14 excl. taxPreliminary estimate for one variant
Parametric model of the horse pen that matches Schleich one. Gcode attached is for ASA MK4S with MMU3. Would you slice one your self do not forget to print supports on the C shape part of the hinge. When not supported hinge C shape will…
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant
Geometric HORSE Figurine Printed with fuzzy skin effect. Fuzzy Skin: All Walls Fuzzy Skin Point Distance: 0.35 Fuzzy Skin thickness: 0.2 If you're interested in the commercial use of my models, check the link to my Patreon…
Low poly rearing horse Print instructions Print it lying on its side by (not standing) (rotate by 90deg) + use supports = it will be far stronger
This bookmark prints in less than 15 Minutes with only little more than 1 m filament. It's a quick and easy print for a beautiful gift. Update 15.12.2022: If you like puzzles games, you might have a look at my horsehead sliding puzzle . I…
Designer HORSE Sculpture Printed with fuzzy skin effect. Fuzzy Skin: Contour Fuzzy Skin Point Distance: 0.15 Fuzzy Skin thickness: 0.15 If you're interested in the commercial use of my models, check the link to my Patreon…
Hollow HORSE Sculpture Printed with fuzzy skin effect. Fuzzy Skin: All Walls Fuzzy Skin Point Distance: 0.15 Fuzzy Skin thickness: 0.15 If you're interested in the commercial use of my models, check the link to my Patreon…
A horse miniature for tabletop. This is a complete rework of the remix source with entirely new geometry (retopologized). Print instructions Category: Animals
A low poly horse, perfect for a desk ornament, gift or toy.
It is now possible to print the handle without support material. The handle also consists of only 2 parts and is put together after printing. The main part of the handle has a height of 290mm together with the bottom part resulting in a…
All my photos are REAL and show an actual 3D-printed figure photographed by me. [ Suggested Print Setup ] Nozzle: 0.4mm Layer Height: 0.12mm Infill: 5% Wall loops: 2 Supports: Tree (auto) Printed with: BambuLab PLA Matte Ivory White If…
Modern Horse Figurine Very easy print! Printed with fuzzy skin effect. Fuzzy Skin: All Walls Fuzzy Skin Point Distance: 0.4 Fuzzy Skin thickness: 0.2 If you're interested in the commercial use of my models, check the link to my Patreon…
"horse" by stronghero (AyathTheLoafer's rimix) https://www.thingiverse.com/thing:2438365 Print instructions Printed with ZIRO Marble PLA @ 225C
Horse Minecraft Model 3D printable
🐴 Flexi Horse 🐴 A brand new Flexi Model is finally here! 🎉 A happy little horse! 🐴✨ Whether you go for the regular version or the keychain edition , this cutie is the perfect companion for your everyday life. And let’s be real—it’s just…
Koník pochází z dobrého chovu. Skvělý na takovéto domácí hopskání. ;) The horse comes from good breeding. Great for this kind of home hopping. ;)
Modern Horse Decor #2 Fast and lightweight print. Use supports - very easy to remove. Printed with Fuzzy Skin effect. Fuzzy Skin: Contour Fuzzy Skin Point Distance: 0.4 Fuzzy Skin thickness: 0.2 All my photos are real and show an actual…
Cookie cutters in horse shapes. Optimized for quick print and sturdiness. The shapes came from the Noun Project. Toy Horse is #984016 by David Horse is #1699174 by Graphic Tigers Horse head is #1023745 by Bakunetsu Kaito
Based on famous horse statues. Requires tree supports on build plate only. Extra walls due to skinny legs. Tree Supports on build plate only Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
These are some fantastic sawhorse brackets. The idea was to create something 3D printable that matches the design and functionality of store-bought saw horse brackets. Why print it? Well… I needed a set and why not? These brackets proved…
Join here to get access: https://www.patreon.com/kogi3d Print in Place Articulated Horse Model Hey everyone! With the Year of the Horse just around the corner, I’m thrilled to reveal my latest creation - an articulated horse model 🐎…
A chess horse. The files are 3mf. instead of the common STL. 3mf files are smaller and more accurate and still work with all slicers I've tried.
1/10 Mustang Dark Horse Body for DKS-Basic. Chassis modified to fit narrow width. You need to print included rear axle, front bars and steering links. Chassis Link
Material: PLA Printing speed 100mm/s Nozzle temp 215 Bed temp 60 Support No Plate adhesion No 15% filling
Realistic horse Commercial Membership – all my models with a commercial license: https://www.patreon.com/c/BondFire
Horse Decor . Feel free to scale it as desired. Printed with Fuzzy Skin effect. Fuzzy Skin: All walls Fuzzy Skin Point Distance: 0.4 Fuzzy Skin thickness: 0.2 Happy printing! All my photos are real and show an actual 3D-printed figure…
This model is compatible with the lego system.
This friendly little horse is full of charm, with its soft mane, round eyes, and gentle pose. Whether you love horses or just enjoy adorable animals, this one makes the perfect buddy for your desk, shelf, or collection Fun to paint in…
2026 isn’t just another year: according to the Chinese Zodiac it’s the Year of the Fire Horse . Translation: elegance, energy, and a dash of “I’ll trample you if you get in my way.” This model isn’t here to bring luck, it’s here to steal…
used Onur horse scan to make a standing horse on pedestal, i printed it at 150%. if you print original or smaller the legs become quite thin and need to be careful removing the supports.
This model started as a heavy remix from rowiac on thingiverse, then I made the skeleton printable for 3D and added the barding and other details. Original file located here: https://www.thingiverse.com/thing:4646612
Sea Horse. Split Version available: use .3mf for split laid flat on plate. .obj split is not split just mainipulated to be more easily split. If you would like to set your own split point use this.
No Support. Glue not required.
I found this horse on myminifactory and tried to print it. Worked out pretty well. I did not use infill so i had to fuse some parts afterwards. The top of the back seperated due to shrinking. I heated up the part and gently forced them…
My horse head. View my other models too. Enjoy printing and follow me!
Horse with embossing plate on side of saddle. Fixed 1/12/2024
String art featuring an Icelandic horse. Print at 0.3mm layer height without supports. If you are using Prusaslicer check the 'detect thin walls' box and make sure the 'wipe while retracting' is unchecked in your printer settings.…
saddle holder for Schleich Horse Club, easy to print, easy to glue the gcode and 3mf file includes manual paint-on seams for (hopefully) optimal printing my other parts for schleich horse club:…
Pferde Unterstand - Horse shelter for Schleich horses easy to print, easy to assemble Print instructions Rafts:No Resolution:0.3 Filament: any PLA or PETG
Horse model. Prepared for handpainting 0,16 layer, 5% gyroid infill, 2 walls, organics/tree supports
A multi-piece model of a horse skeleton in approximately 1:12 scale. The model was designed for SLA resin printing but it may be possible to print it with an FDM printer if scaled up. It was designed so that the pieces snap together with…
Wall art decoration with motif of horse head
The Flexi SeaHorse model is perfect for those new to 3D printing. It's designed to be printed in one piece without the need for supports, making it a hassle-free printing experience. The model's joints are cleverly integrated into its…
Hier ein Hindernis und zusätzliche Zaunteile für Spiele mit Schleich Modell Pferden. Hinweis: Ich habe mittlerweile etliche der Gatterteile gedruckt. Bei Verwendung von PLA brechen die Verbinder viel schneller als wenn PETG verwendet…
Seahorse Hexa, Sculpture
Horse Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
A fun, new dummy 13 accessory
The Flexi Horse model is perfect for anyone interested in creating toys, educational tools, or simply enjoying the satisfaction of printing an object that has moving parts. Once assembled, it serves as a fun, interactive desk toy or a…
Sitting Horse model. Prepared for handpainting 0,16 layer, 5% gyroid infill, 2 walls, organics/tree supports
Attention! The tolerances are specially tight to ensure that the model is stable and does not lose pieces. Make sure you have calibrated filaments and do not overextrude.Look at the instructions carefully and make sure you have a good…
This lucky horseshoe only has details on one side, which makes it easy to 3D print. The original model was designed in Blender 2.9 to create a simple open-mold casting. I also made a thin configuration for those who want something more…
Designed and successfully printed by a horse loving Year 7 high school student. Supports required under the chin of the horse. Magnet holes on the underside 20mm diameter.
A remix of https://www.thingiverse.com/thing:2835053. The original links would break from time to time while taking the print off the bed. The links where updated to be larger and stronger.
Designed in Solidworks , Printed on Bambu X1 C Layer Heights Stable file 0.2mm Roof file 0.2mm Stable door 0.16mm 31.05.2024 - update note , I have updated the stable file because by mistake earlier I uploaded the wrong version
🇺🇸 Welcome to Columbus, Ohio! Ohio Stadium , also known as the Horseshoe, the Shoe, and the House That Harley Built , is an American football stadium in Columbus, Ohio, on the campus of the Ohio State University . Its primary purpose is…
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP --- The CF Horse portrays the animal in a dynamic prancing…
An Articulated Horse keychain
Here are some SEAHORSE magnets. This is a remix of a 2013 design : https://www.thingiverse.com/thing:182265 ( can't cross "remix" for publishing as the source is external of Printables ) Made of 2 symetric parts Requires 2 magnets 8x3mm…
this is a remix of jw27's unicorn mustang. i made a remix of this instead of just taking one of the exiting ones because this one has lots of details like the real badge instead of those flat ones. i basically just removed the horn to…
A quick, simple model based on the Pokémon Horsea, sculpted from scratch in Autodesk Fusion 360. It doesn't need supports, and I also made it in multicolor version to be printed using a Prusa MMU, Mosaic Mfg. Palette or similar devices.…
Prusa Affiliate link: http://www.prusa3d.com/#a_aid=3090 Feel free to check out my website https://www.ar3dprints.com/
This is the V2. The vertical fence was too thin and broke too easily. Their diameters are now 3 mm instead of 2 mm. Change the perimeters number to 3 to fulfill it. Before, you had to glue the top railing. Now everything is in one part.…
Trojan horse , huge hollow wooden horse constructed by the Greeks to gain entrance into Troy during the Trojan War . The horse was built by Epeius, a master carpenter and pugilist. The Greeks, pretending to desert the war, sailed to the…
One of the tricks I like to use in organizing my tools is to attach things to pegboard using wall anchors in the holes to accept screws. This doesn’t always work as well as I would hope. Since pegboard is usually 1/4″ thick or thinner,…
: A horse standing on its hind legs (rearing), with its front legs tucked inward. The posture conveys a sense of energy and elegance. The sculpture includes fine details such as a flowing mane, a thick tail that helps provide structural…
I needed a good looking and realistically sized and shaped model of a horseshoe for a different project and after a hour of unsuccessful searching and printing I designed my own. I used a rather old and worn horseshoe from my girlfriends…
My daughter wanted a horse jump for her schleich play horses so this is what i came up with. print it laying on its side and nothing can really go wrong. the pole is cut down the middle for easy printing then glue 2 halves together. copy…
If you, or someone you know could benefit from a model/print like this (especially if you don't have access to a 3D printer), please reach out to us at [email protected] and we'll see what we can do. If you're enjoying models like this,…
A few years ago I wanted to have a Scharnhorst - so I made one… I dont know anymore why its scaled so strange but the hull needs to be printed in scale 287 if you want to have a 1:350 model. The smaller parts need to be scaled smaller but…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
Material: PLA Printing speed 100mm/s Support No Plate adhesion No 15% filling
Modified version of Horse, Prototype by gzumwalt, using a manual crank instead of a motor. All files and build instructions are the same as gzumwalt's Instructable, except for Gear+Worm.stl, and Base_Box.stl+Base_Stand.stl instead of…
Print it flat on build plate! No support needed!!!!! Commercial Membership – all my models with a commercial license: https://www.patreon.com/c/BondFire
Christmas Cookie Biscuit Gingerbread Cutter (approx 55 mm) You can change scale in the Fusion 360 File in Parameters Table, for make the cutters bigger (X and Y axis), without to increase the wall thickness. (See attached picture with…
Meet Chester, the most cheerful and goofy horse you'll ever see! Energetic, fun-loving, and always wearing a big, bright grin. With his oversized eyes and wide smile, Chester is the perfect companion for spreading joy and laughter.…
The design is from a 3D scan of Still Water . Still Water is a 2011 outdoor bronze sculpture of a horse's head by Nic Fiddian-Green, located at Marble Arch in London, United Kingdom. All credits goes to prenonpadrix that created this…
Geometric Horse wall art: Default size is around 200cmx180cm ! 168 pcs (all parts can be print at full size on a standard printer bed) All parts are numbered on the back and here you can find the numbers assignment : Geometric Horse wall…
A standing low poly horse. Not the easiest print. Make sure you have good bed adhesion and sturdy supports. I recommend to use horizontal expansion on the supports and z hop to make sure the nozzle does not knock over parts of the print.…
Loved the original horse but needed a lot of time to print and lots of support. Took the original and sliced it into pieces and added connecting pins. Number of pins needed: Pin for the floor/botom: 4pcs Pin for body/horse: 6pcs Be…
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP --- This model depicts the Friesian horse, interpreted in…
🇸🇪 Welcome to Sweden! 🐴 This model is a little different from what we usually do in MiniWorld3D. Instead of a landmark or famous building, this is part of a series of objects representing art & design of the world . Together, they…
I tried to make a Horse based on the frame system of Dummy13. I used a horse skeleton as a base and reproduced all limbs and joints. The neck seems to be too small (as you can see in one of the pictures the horse can't reach the ground to…
I am pleased to share the articulated horse , a model based on the lovely “ practise horse ” made by Carola Funder . This horse has a total of 14 joints and prints in place without using supports . With the complex shape of the first…
For this one I recommend Brims + Tree Supports on build plate only. Add extra perimeters to make legs stronger. Tree Supports on build plate only Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
A nice keychain for horse lovers.
