Counting matching models…
Some time ago I got one of these mini GPS units to put on my quad after I lost the previous GPS unit in a crash. Turns out this unit is quite decent and, comparatively, pretty cheap so I'm quite happy with it. One problematic thing was…
FlyFishRC Volador VX3.0 VX3.5 VX5 Vibration Dampers for 19mm Camera TPU. Found the original silicone ones are way to soft for a 19mm analogue camera. I couldn't find an STL online so i made one.
Honda HRC brand keychain, with a simple and easy design for a quick impression and low material cost. There is a file prepared for basic printers that do not support color changes within the same layer (similar to my example with an Ender…
Rohrclips M25, RohrHalter M25, M25 Installationsrohr Drucken, Liken, Bewerten, Kommentieren.
This support is designed to be attached to the top spacer of the cam plates. Place the GPS inside the support. Fold the support around the spacer with the two legs going inside the bridges. Screw the support in place using the top plate…
FlyFishRC Volador 2 VX5 - dual antenna holder (Waksnail Moonlight Kit)
JeNo 3 mini aileron avec mini GPS FlyFishRC M10 integré
Easy to print, no support needed.
Compact antenna and GPS mount for Volador VX3.5. The VTX antenna mount requires trimming down the plastic antenna tube to fit. Sized to fit the antennas from a dual antenna Walksnail VTX, but will also fit DJI O4 Pro antennas. Supports…
This is a mount for the Foxeer m10Q 180 for the FlyFishRC Volador VX5, that includes provision for an SMA mount and a USBC connector that can be wired for Walksnail Avatar
Honda HRC - Keychain - Portachiavi - Porte Clès - 钥匙链 - llavero Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx Category: Gadgets All trademarks, logos and brand names are the property of their…
Front GPS holder for the Volador II VX5 O3 FPV Freestyle T700 Frame by FlyFishRC. This GPS holder, made for 25 x 25 mm modules such as the Team Blacksheep M10Q, which also includes a magnetometer, uses the same hole pattern as the…
Wein-Gähr-Röhrchen Print instructions Wein-Gähr-Röhrchen Mat. PETG Füllung 100% Noch nicht Gedruckt Füllung 100% Getestet.: Habe noch keinen erfolgreichen Druck hinbekommen (ist bei mir nicht dicht), vielleicht muss ich die Datei noch mal…
A CRSF + FlyFishRC M10 mini GPS holder for the iFlight Nazgul Evoque frame based on my base GPS holder and DJIBryan 's excellent holders for other GPS units .
Brausetabletten-Röhrchen-Halter für 8 Stück Print Settings Printer Brand: RepRap Printer: Kossel Rafts: No Supports: No Infill: 25% Category: Kitchen & Dining
Honda HRC Type 2 - Keychain - Portachiavi - Porte Clès - 钥匙链 Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx Category: Gadgets 28/04/2024 Added HRC Type 3 All trademarks, logos and brand names are…
adjustable 04 pro camera, dual antenna mount, and top GPS mount made with TPU
A mount for the GEPRC 25x25mm GPS modules, which fits where the GoPro mount is intended to be. Tested with the Volador II and GEP-M1025Q, but most likely compatible with at least all the other Volador frames and GEP 25x25 gps modules.…
Here is a very simple pill box. No frills, no thread, small and neat. The lid is printed in TPU, the little tube can be made from any filament. If necessary, you can scale it in the slicer. As a first approximation, the rule of three can…
Antenne Dji Air Unit o3 + mini GPS FlyFishRC M10
This is a simple mount for the DJI O3 Stubby Antenna made by FlyFishRC. I got tired of breaking the stock antenna, but with the stubby antenna and this more protective mount I haven't broken one since. The antenna can be found here:…
This is an axii mount for the volador. there are three models uploaded. The part one and two is split for easier printing. By splitting the model you can have it two different colors. This mount should be compatible with the lumenier axii…
Beschreibung PLA Füllung 20% Schichthöhe 0,2mm mit Stützen, ohne Rand
Model made from: original GPS Mount stl available here: https://iflightrc.freshdesk.com/support/solutions/articles/48001238224-nazgul5-v3 "FlyFishRC M10 Mini GPS Reference Model and Reference GPS Holder" available here:…
TPU 50% Gyroid Infill
So, I already had regular M10 GPS and decided to attach it to tiny FlyFishRC VX3.5 drone. I'm not shure about that front tooth for covering antenna, just wanted to protect somehow and not to use too much plastic. But if you don't like it…
Abluftschlauch: https://www.bauhaus.info/lueftungszubehoer/air-circle-pvc-schlauch/p/13506381 Category: DIY
📄 Description This is a custom-designed mount for the BZ-181 GPS module , made specifically for the FlyFishRC Volador II 5-inch frame. The mount provides a secure fit and keeps wiring tidy, while maintaining a lightweight and durable…
Took the base file from @maximotep this is made only for the mini m10 gps from flyfish.
Abluftschlauch: https://www.bauhaus.info/lueftungszubehoer/air-circle-pvc-schlauch/p/13506381 Category: DIY
Für das Scharnier einfach z.B. ein Stück Büroklammer einkleben. Die Löcher sind zum Einkleben von Magneten mit 3mm Durchmesser und 2mm Tiefe. Das ist nicht zwingend notwendig, fühlt sich aber sicherer an, da der Deckel weniger Chancen hat…
Die Fahrchips Box ist für die rechteckigen gedacht. Standardgröße: Das könnt ihr auch in jeder Farbe drucken. Viel Spaß beim Drucken
Diese Halterung bietet Platz für bis zu fünf Röhren von Brausetabletten und ist die ideale Ergänzung für Ihre Küche, Ihr Büro oder Ihren Arbeitsplatz. Das durchdachte Design ermöglicht eine übersichtliche und platzsparende Aufbewahrung,…
Es lässt sich problemlos in der Größe für Röhrchen mit anderem Durchmesser scalieren. Durch den abgerundeten Rand der Löcher sind die Röhrchen gut einzustellen.
FlyfishRC M10 mini GPS front mount for SpeedyBee Mario 5 frame. Material: TPU95, infill 20%. Support: yes.
No supports required. You'll need one M6 x 1.0 nut to superglue into the body of the print. Fits the GXV160 engine.
Diverse Shops verkaufen dieses stylische Ölkännchen. Musste ich haben, zuckersüß das Ding. Jetzt ist da einmal ein Schlauch dabei (sogar mit weichem Draht innen, kann man sich formen und biegen wie man's braucht - geil) und ein starres…
Die Fahrchip Box ist für die Runden gedacht die man hintereinander reinstellen kann. Kann man in jede Farbe drucken die Box. Es ist gedacht für die Runden standardgröße Fahrchips. Viel Spaß beim Drucken
Remix GPS mount FlyFishRC Atlas 4 for Mini GPS HGLRC M100 (15 mm x 15 mm x 5,2 mm) Fusion 360 file Category: R/C Vehicles
pferectly fits the HDZero Antenna from the Freestyle V2 VTX bundle. the long shroud covers the whole antenna head for better protection but maybe worse detuning ? in photo is of the 65mm short shroud version. The 68mm version is the…
This Lipo Box is designed to contain 3x5 1S 280mAh / 320mAh LAVA batteries. Can be used for storage, transport and sorting. The dimensions of the 3D print are 110 x 80 x 21 mm. This Lipo box is designed to be used with standard metal…
This is a remixed version of the FlyFishRC O3 Antenna Mount so that it fits the new Volador VD4 Frame. Print in TPU Original design by FlyFishRC
TPU for the flyfishrc gps with a JeNo 5.1 cine plate
PETG 10% infill 0.2 mm
This is a silly idea that I had and probably not a good one. Why mount an action camera in the front of a quadcopter if it can be mounted in the back? What could possibly go wrong? This was sketched up far too quickly and could be…
Caddx Vista Mount w/ FlyfishRC stubby and ELRS antenna holder Can be used without any screws - the walls on the sides holds the vista in place Comes with mounting holes for either 20x20 or 25x25 Can hold different stubby antennas - i used…
PLA Füllung 25% Schichthöhe 0,28mm mit Stützen, ohne Rand
▶ More builds on my channel: youtube.com/@fpv-geek Yesterday I tore off both original DJI O3 antennas flying a bando. So I switched to a FlyFishRC Osprey 40 mm stubby and designed this TPU mount for my TBS Source One V6. The antenna sits…
So, I already had regular M10 GPS and decided to attach it to tiny FlyFishRC VX3.5 drone. I'm not shure about that front tooth for covering antenna, just wanted to protect somehow and not to use too much plastic. But if you don't like it…
Die Fahrchips Box ist für die rechteckigen gedacht. Standardgröße: Das könnt ihr auch in jeder Farbe drucken. Viel Spaß beim Drucken
Took the base file from @maximotep this is made only for the mini m10 gps from flyfish.
Side covers to protect FC/ESC, included option of opening and plug for FC USB-C Port.
Ein einfacher Halter zum Einstellen von Röhrchen zum befüllen. Variante V3 nicht stapelbar aber ohne Support druckbar.
Side covers to protect FC/ESC, included option of opening and plug for FC USB-C Port.
The caps are made for 2024 / 2025 models. I printed them at 100%, ultradetail setup and ironing feature on.
Ein einfacher Halter zum Einstellen von Röhrchen zum befüllen. Variante V3 nicht stapelbar aber ohne Support druckbar.
Zum genauen Aufbringen von diversen Stoffen aus Sprühflaschen. Man setzt es auf den Sprühkopf einer Spraydose auf. Der Inhalt kann nun punktuell aus der Dose auf das zu treffende Objekt aufgetragen werden.
Honda HRC - Keychain - Portachiavi - Porte Clès - 钥匙链 - llavero Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx Category: Gadgets All trademarks, logos and brand names are the property of their…
Honda HRC Type 2 - Keychain - Portachiavi - Porte Clès - 钥匙链 Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx Category: Gadgets 28/04/2024 Added HRC Type 3 All trademarks, logos and brand names are…
