56 models
Simple, single 12 gague shotshell holder to give sporting shooters that one last round to complete a stage (when you miss that last critical shot - we've all done it!). This is a remix based on glompos21 design on Thingiverse. I've…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for PETGSource material: PET
Dieser Halter ist für eine Motorsäge, Heckenschere oder auch andere Geräte gedacht die hängend gelagert werden. Für eine gute Haltbarkeit sollte die Füllung mindestens 80% betragen. Viel Spaß beim drucken. Bitte geben Sie mir noch ein…
Print approx. €11.33–€13.85 excl. taxPreliminary estimate for one variant
Connector between sith lightsaber ( https://www.printables.com/cs/model/3722-collapsing-sith-lightsaber-removable-blade ) and jedi lightsaber ( https://www.printables.com/cs/model/3721-collapsing-lightsaber-removable-blade ). A little…
Print approx. €2.01–€2.46 excl. taxPreliminary estimate for PETGSource material: PET
Bei Bildern, die in exakt gleicher Höhe hängen sollen oder Bildern, die mit 2 Aufhängern aufliegen sollen, hilft das kleine Gadget, sie exakt waagerecht auszurichten. Nicht immer läuft der Bohrer ja exakt dort in die Wand, wo man möchte…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
I had to change the seals recently in by GROHE PRESSURE BALANCE VALVE CARTRIDGE TIIEF value. Unfortunately, when trying to remove the handle after loosening the setscrew, this handle was still stuck. I finally got it off, but this piece…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
Adapter for Dewalt DXV30SAPTA hose to Cocraft HBD500 bench sander Parameters: Printsettings: 0,2mm Infill: N/A Wall parameters: 2 Prefered material: PETG No support is needed
Print approx. €2.27–€2.77 excl. taxPreliminary estimate for PETGSource material: PET
Recently I got a Kylo Ren Lego minifigure and I wasn't quite happy with his original lightsaber hilt... so obviously I designed and printed a new one. First I reverse engineered the basic Lego lighsaber hilt piece and then started…
Lightsabers need, want and should be displayed. Especially with more hilts the skadis or uppsel board are perfect for that. And the need hooks that are stable and big enough.
Wall Mount or Cover for the (unused) Stihl HSA 26 Blade. Model without screw holes can be used as a cover Wall Mount for HSA 26: https://www.printables.com/de/model/877043-stihl-hsa-26-wall-mount
STIHL HSA 26 – Wall Mount A simple and practical wall mount for the STIHL HSA 26 cordless garden shears . Keep your HSA 26 securely stored, easily accessible, and neatly organized in your garage, workshop, or garden shed. 🖨 Printing…
Removed some material to keep the RGB visible and use less filament.
Wandhalter für Stihl HSA 26 und GTA 26, die Geräte werden aus Sicherheitsgründen ohne Akku in die Halterungen gestellt. Mir ging es darum, das Kinder nicht die Geräte einschalten können wenn sie in der Halterung verbleiben. Gedruckt in ABS
Just a stand to collect some magazines Print Settings Printer Brand: Prusa Printer: I3 MK3S Resolution: 0.2 Filament: No Name PLA Category: Office
To mount the shelf, use the Straight open bracket with endstop - 40mm.stl https://www.printables.com/model/109245-bracket-and-shelf-collection-for-skadis-over-200-f
A lighter or heat may be needed to smooth some edges
A mechanical keyboard case imitating the appearance of an IBM Kishsaver keyboard. Features a 5 degree typing angle and tofu68 style layout. This model requires you to print tall for the case - make sure your Z-steps are calibrated…
Lightversion of the original. Print ist the longway in direction of your bedmooving to prevent layershifting in the thin walls. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0,2 Filament:…
Printed with PLA, tree support + support block on the back. My first print is a bad quality as I printed with high speed.
I liked the mini Lightsaber, but I found it to be rather fragile, especially at the joints. I decided to remix it so that I could print the blade all in one piece. I also felt that the 3 parts connected were a little too long. The blade…
A travel case for DJI flip, (not my model btw)
https://www.ikea.com/cz/en/cat/hallbar-series-47255/ The litter box is designed to fit only to Metod shelfs. A Blum or VauthSagel system is little bit shallower than Ikea Metod and plastic containers stands on the bottom of the shelf.…
M32 Adapter für die metabo STE 100 Quick, die im eigenen Absaugstutzen 2x3 Rippen als Halterung auf dem konischen Endstück hat. Ich habe die Ausnehmungen für die Rippen übertragen, mit dem letzten Einrasten sitzt der Adapter streng am…
Ideal for vacuuming crumbs from smooth surfaces It has been proven to print from ABS (it is more flexible than PLA) Print the tube lengthwise so that the filaments are stressed to bend. I print everything only through the wall without…
M25 Adapter für die metabo STE 100 Quick, die im eigenen Absaugstutzen 2x3 Rippen als Halterung auf dem konischen Endstück hat. Ich habe die Ausnehmungen für die Rippen übertragen, mit dem letzten Einrasten sitzt der Adapter streng am…
prosauropod from the early Jurassic Kayenta Formation.
It is exactly what the name says. It has no moving parts or blade.
This is a reminder post to put on the playing field when the Bard / Soothsinger / "Music Note" character in the boardgame Gloomhaven is playing the Wound song. Inspiration for making this post comes from Rohirrim's "Gloomhaven - Bard…
Remix of the original with a design on the front. My old cover broke and I wanted a clean version.
Chain bar fixing screw PARKSIDE Aku PGHSA 20Li, nut insertion hole M6 length 18mm
I designed this hammer to have a bed scraper on one end, and added a lightsaber handle. I would recommend sanding the scraper to “sharpen” it. I printed it with 100% infill to give it some weight. I can upload it with a normal handle if…
Mit dem Einhell-Adapter kann das Bodensaugrohr eines Einhell Handstaubsaugers mit dem Parkside SHSA 20-Li verbunden werden. Der Rohr-Adapter hat an der Einsteckseite einen Durchmesser von 32mm und verjüngt sich nach 50mm Einstecktiefe auf…
Thomas Staub- & Waschsauger ersatz Category: Replacement Parts
Half SA (HSA) glagolytic alphanumeric keycaps. The legends are inset 0.4mm into the keycap so are “double-shot” in a sense that they will practically never wear out. Printing instructions: Print both top and bottom with a layer height of…
Wenn man die Thule Schuhtasche an eine seitlichen Kederschiene befestigen möchte
This is a replacement TPU cover for a HitchSafe key vault, which stores keys and other valuables inside the tow hitch on a vehicle. The covers can get knocked off, especially on offroad trails, so I've needed to replace mine. Since I was…
Insert for the board game Soothsayers by Play to Z. Fits cards sleeved in thicker TCG sleeves with minimal lid lift. Mine are sleeved with these AliExpress sleeves and they fit just barely. Tarot cards are left without a holder since…
Dieses Modell soll Strand Diebe hindern, eure Wertgegenstände zu stehlen, man schraubt es einfach in den Boden hinein und packt seinen Wertgegenstände hinein
A replacement trigger for a Stihl FSA 86 R, we've broken and rebroken the trigger 1000 times after using various bits of glue. Maybe we're dysfunctional or maybe it is, either way here's the model if anyone wants to print. It seems to…
Wer die originalen Plastikräder gegen eine Luftbereifung tauschen möchte kann z.B. diese Räder nutzen. https://www.rollenplus.de/250-mm-Rad-mit-Luftbereifung-10-x-2125-Zoll Die Räder sind zwar schmaler als die Originale, aber deutliche…
So your nephew broke his lightsaber's battery lid, fear no more, we've got you covered.
The Weighsafe heavyweight hitch has rubber bumpers that can degrade upon use. They can be replaced by disassembling the hitch and inserting new bumpers. The lifetime of bumpers can be maintained by not using weight distribution bars on…
Dies ist eine esun plastikspulen Mitnahme zum wieder aufwickeln von schlecht gewickelten Spulen.
A wall mount I made for the FoodSaver FSFRSH0051 [https://www.amazon.com/FoodSaver-FSFRSH0051-000-FreshSaver-Handheld-Sealing/dp/B002FWIVCA]. It mounts using WallDog phillip screws [https://www.amazon.com/gp/product/B003VNCCZE/] or…
CVD Achse 1:16 Länge 70mm / Achsabstand 65 / Ø5
Gridfinity holder for the Bosch HSA-MD SpinLOCK Universal Arbor. It may also fit HSA-HS, but I don't have one to test
Repalcement from tool manufacturer is not available (just with a complete new blade) so i designed this replacement for my Parkside PHSA 20-Li hedge trimmer. Mine broke, because the screwhole attachment was too flimsy. I think the new one…
This is a replacement battery cover for HP hsa-d01k wireless keyboard. It should be printed with 100% infill
Perch jackets for the WeighSafe WDH hitch perches. Similar to what is offered for the Equilizer E4 WDH. I printed these in nylon with 100% infil. Be advised that this will reduce the amount of sway control you will get with your hitch.…
Dieser Halter ist für eine Motorsäge, Heckenschere oder auch andere Geräte gedacht die hängend gelagert werden. Für eine gute Haltbarkeit sollte die Füllung mindestens 80% betragen. Viel Spaß beim drucken. Bitte geben Sie mir noch ein…
CVD Achse 1:16 Länge 70mm / Achsabstand 65 / Ø5
Gridfinity holder for the Bosch HSA-MD SpinLOCK Universal Arbor. It may also fit HSA-HS, but I don't have one to test
Repalcement from tool manufacturer is not available (just with a complete new blade) so i designed this replacement for my Parkside PHSA 20-Li hedge trimmer. Mine broke, because the screwhole attachment was too flimsy. I think the new one…
Insert for the board game Soothsayers by Play to Z. Fits cards sleeved in thicker TCG sleeves with minimal lid lift. Mine are sleeved with these AliExpress sleeves and they fit just barely. Tarot cards are left without a holder since…
