Counting matching models…
A bracket to mount a SCSI2SD adapter (version 5 and newer) into the expansion card slot of a Macintosh SE or SE/30. Allows for much easier access to both the SD card slot and micro-USB port. Version 1.2 of this bracket features tweaks to…
Hey, i designed a easy cap for the INMP441. If you want to fixate it, just use hotglue or similar. Leave a like if you like it ;)
This is a remix of the AOC-STGN-I2S v2 bracket designed by simbaja. His model was made for the M720q however I have a M90q which while very similar they changed the bracket area on the M90q ever so slightly causing the original design to…
This 3D printed bracket is designed to mount a SCSI2SD to the 3.5" hard drive bay on vintage Macintosh computers. It works with both SCSI2SD v5.1 and v6 models, and has been tested with the Macintosh SE, SE/30, Classic II, LCII, and…
Bracket to mount a Supermicro AOC-STGN-i2S PCIe card into most QNAP NAS devices
I installed this in an SE which has one floppy drive and a dead hard drive. It just barely fits using the original SCSI cable, and with the hard drive bracket still in place. If you have more room available, you could use one like TDNC's…
An enclosure for the ACSI2STM Compact by SidecarTridge (REV1.0.0). This version is a physical and electronic redesign of the original ACSI2STM, with two important improvements: the connector is an authentic DB-20, and the size of the…
I needed a mounting plate for my AOC STGN-I2S network card to install it in my Lenovo M910. Since I couldn't find one that fit my network card, I decided to design one myself. It worked well enough for me to mount the card neatly in the…
This is a case for a SCSI drive emulator that uses a SD card, it is usefull for Vintage Apple computers, or any computer with a SCSI port. It is for this product : https://www.itead.cc/scsi2sd.html You need two hex flat head screws…
This is mount for the SCSI2SD to be mounted in a CMD HD drive enclosure. This is my first 3D design.
An enclosure for the ACSI2STM Mini by SidecarTridge (REV1.0.0). This version is a physical and electronic redesign of the original ACSI2STM. The enclosure is provided as two STL files: base and lid . No screws are required, the holes and…
I got a SparcStation 2 with a dead SCSI drive and decided to replace it with a solid state solution. Unfortunately, I only had a SCSI2SD 4.5 around the house and it seems to be a model that doesn't get many 3D adaptors devoted to it. So I…
This case is for this product https://www.itead.cc/scsi2sd.html It works great and only needs 2x 3mm Flat Head Hex screws between 14 and 18mm. I have included my Fusion 360 file so you can make remix of this as you like. Enjoy. P.S: Ref.…
Case for Digilent Pmod I2S2, uses two M2.5 screws and nuts. No supports needed, will probably print fine with whatever filament/layer height you feel like using. Note that the pins are slightly recessed into the case, so depending on the…
Case for the ACSI2SD SD Emulator for Atari ST Category: Tools
Case for Digilent Pmod I2S2, uses two M2.5 screws and nuts. No supports needed, will probably print fine with whatever filament/layer height you feel like using. Note that the pins are slightly recessed into the case, so depending on the…
Wanted to do my 12V ESP32 WLED project with dupont cables, but none of the available cases were big enough to let me close the case without wires pressing against each other. Integrated the buck converter to the case, as well as I2S (…
Fits a Pi Zero (W) and Adafruit DAC perfectly (https://www.adafruit.com/product/4037) Nice for running a headless media player like Moode Probably close or fits other HAT DACs also …also, in my direct experience using a switching input, I…
Hello, THIS IS WORK IN PROGRESS!!! Snap in case for esp 32 - 38 pin with I2ss mic, first time making a case and it works well, but doesnt properly close. If u feel like it please remix it as u wish, hopefully post your makes or remixes :)…
Very simple sled to attach SCSI2SD to a mount expecting the screw pattern on the bottom of a 3.5" drive. Insert M3 hex nuts into the hex-shaped holes. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution:…
