2,298 models
Instruction Simply take the two blocks align to the microfiber and cut to the same rectangle size. Wrap the microfiber around the edge and crimp it down. Updates March 23, 2024 Added an alternative knob for thin cloth or sandpaper.…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
U-scribe jig set for for all common thicknesses. Metric: 12 - 14 - 16 - 18 - 19 - 20 - 22 - 24 Inch: 1/2 - 5/8 - 11/16 - 3/4 Added STP file for your own customization ! 10.9.2024 Added 19mm on demand.
Print approx. €2.60–€3.18 excl. taxPreliminary estimate for one variant
HiFiBerry Player If you enjoy listening to music you will really love this tiny music player! The player consists of: RaspberryPi 3B+ or RaspberryPi 4* HiFiBerry DAC+ PRO or HiFiBerry DAC-2 PRO (added 22 Jule 2025) Additional accessories:…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
The redesigned version of the original Prusament Clamp for PETG. This lighter version saves material but is still perfectly strong using PETG Carbon Fiber. The remix is designed by Josef Franc ( ropak ).
Print approx. €4.27–€5.22 excl. taxPreliminary estimate for PETGSource material: PET
Small scribing block with most common heights for woodworking. 9 - 12 - 15 - 18 - 19 - 22 mm Three models: 7,5 with “springs” inside for better hold pencil 7,5 - 9,5 simple straight holes STEP file included, to make you own custom block.…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
Some how this situation will end and we will emerge (I really hope this) being better persons or wiser like Grandalf. I just want to share with you guys, these key chains to break the 20 different models for this Prusaprinters contest. I…
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of the Rugged Box Parametric by Whitey. This box is designed to hold 100 .40 Caliber rounds in two removeable trays. The center rib on the box base corresponds to the slots on the bottom of the ammo trays. This allows one…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
CLICK HERE If you're looking for 12ga storage trays for a standard M2A1 .50 cal ammo can! CLICK HERE If you're looking for 12ga storage trays for a Cabela's Dry-Storage Ammo Box! Some manufacturers sell their shells in boxes that are so…
Print approx. €2.51–€3.07 excl. taxPreliminary estimate for PETGSource material: PET
English A school desk in Playmobil style. Printing guide Printable without supports with default settings. My own settings are visible in the project file (3 tables were printed in the project). The project file is ment as an example.…
Print approx. €2.10–€2.56 excl. taxPreliminary estimate for PETGSource material: PET
Nice and detailed Wall Art model of the Nissan GT-R R35 Liberty Walk. Adjustable size. I accept new model suggestions.
Print approx. €1.05–€1.29 excl. taxPreliminary estimate for one variant
In a mountainous region in the heart of Ethiopia, some 645 km from Addis Ababa, eleven medieval monolithic churches were carved out of rock. Their building is attributed to King Lalibela who set out to construct in the 12th century a ‘New…
Print approx. €3.16–€3.86 excl. taxPreliminary estimate for one variant
Just a washer for nails or screws
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Metal Ammo Cans provide a watertight and somewhat flame resistant storage container for Lipo Batteries (your results may vary). I created this divider to hold 10 1700mah 6s packs upright. The end two dividers will fit even larger packs…
Print approx. €10.24–€12.52 excl. taxPreliminary estimate for one variant
There's only so much space at the top of the ladder for tools, so I decided to make a box that clips into one of the existing holes in the top of ladder. Werner has updated the top plastic part of their fiberglass ladders and now has a…
Print approx. €18.41–€22.50 excl. taxPreliminary estimate for PETGSource material: PET
Easy to make a 4 colored “25 de Abril” themed keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No Today is special. My home country (Portugal) is celebrating the 50th Anniversary of the “ Revolução dos Cravos”. More…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
To protect the robot from damage caused by sharp furniture legs, I designed a protective ring. The ring is sturdy enough to shield the top and slim enough not to interfere with either the laser sensors or the bump sensors. The rear tabs…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
You need a square nut M3 and an Allen screw M3x6mm
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for PETGSource material: PET
Easy to make a 4 colored “25 de Abril” themed keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No Today is special. My home country (Portugal) is celebrating the 50th Anniversary of the “ Revolução dos Cravos”. More…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
Dreibein mit Platte.
Print approx. €20.43–€24.97 excl. taxPreliminary estimate for one variant
Auf Princore gibt es einen klasse Filamentabroller für die Ikea360 10l Boxen als .stl für einen schmalen Taler. Leider sind die Rollen nicht mit den Prusament Spulen kompatibel da die Rollen zum einen zu schmal sind und duch die…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
Diese Halterung soll die Flex-Scheiben in Position halten im Koffer. Die 2 Hälften habe ich mit Epoxy geklebt. This bracket is intended to hold the “cutting discs” in position in the case. The 2 pieces I glued with epoxy.
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for PETGSource material: PET
PLA Füllung 20% Schichthöhe 0,2mm ohne Stützen, ohne Rand
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for one variant
Washers to DIN EN ISO 7092 with medium through-hole. For M1.6 ; M2 ; M2.5 ; M3 ; M4 ; M5 ; M6 ; M8 ; M10 ; M12 ; M16 ; M20 ; M24 For the smaller washers up to M3, I recommend a smaller nozzle (smaller than Ø0.4). Unterlegscheiben nach DIN…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET
7x threaded inserts M3 2x threaded inserts M6 7x M3x8 DIN 7991 2x M6x16 DIN 933
Print approx. €4.92–€6.02 excl. taxPreliminary estimate for PETGSource material: PET
These are Lego-compatible doors. One left and one right door can be used together as a 5x8 gate. The doors can be swivelled inwards and outwards. Print the doors in STL orientation with three outer layers, 15-25% infill and support. — I…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
This is a clip to attach a cable to a fence. Nail a normal nail into the fence, place the cable in this clip, and then hang it on the nail. If you want this already printed and mailed it is available to purchase here. I am the only one…
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for PETGSource material: PET
These are Lego-compatible doors, optionally decorated with a pirate skull. One left and one right door can be used together as a 5x8 gate. The doors can be swivelled inwards and outwards. Print the doors in STL orientation with three…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
Stand for TP-LINK XN020-GV3 Fiber Router.
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant
Um bei einem VW T2b eine elektrische Wasserpumpe für die Scheibenwaschanlage zu verbauen, muss am Lenkstockschalter das Ventil durch einen elektrischen Schalter ersetzt werden. Zum befestigen, benötigt man diesen Adapter. Eine genaue…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
These are the files for making ones own YouTube subscriber counter with 3D printing, a 16*2 display, ESPs and wood. Full project details available here: https://www.esccrasci.in/diy-youtube-subscriber-counter-with-lcd-and-esp8266 Purchase…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
Plastic style: To be printed in a non-brittle, non-warping material, PETG and PLA+ are perfect. On a good 3D printer with a good precision ... A millimeter must be a millimeter ! Print your tabs, along with the nut and bolt. Don't rush;…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for PETGSource material: PET
Coin with the Statue of Liberty engraved in it. Uses art from PublicDomainVectors.org
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
A stack of prisms where the circumradius of each is the inradius of the prism below it. Prism heights are all the same.
Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant
Rack mount for Nokia Fiber Modem, which provides easy access to the connectors, while keeping the LEDs visible as well.
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
Bitte nehmt an einer Abstimmung teil, damit ich abschätzen kann, wieviel Aufwand ich in meine Beschreibungen einbringen sollte.: https://www.pww2.com/abstimmung NEU: Es gibt zwei Varianten, die sich durch die Art der Wandbefestigung…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for PETGSource material: PET
You can use this clip-on hanger if you want to hang rope/string/cable or fiber coils and you have a hanging rod. OpenSCAD file for parametrization is available here
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
Funktionstest für die Prusa MMU
Print approx. €1.23–€1.51 excl. taxPreliminary estimate for one variant
really cool!! edit it for yourself and just like and download the model for prusameters, i have 1500 so i need some more to get a 3-d printer lol…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
A caliber case composed of two separate parts designed to fit together seamlessly. The top component features the word "calibro" engraved in negative relief. In a separate file, there is a matching positive relief of the same word,…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Zum andrücken der neuen Bremsscheibe, damit der Planschlag zuverlässig gemessen werden kann. Geeignet für Radnaben mit nicht durchgängigen Gewindebohrungen
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for PETGSource material: PET
A tower of prisms where the circumradius of each is the inradius of the prism below it. Prism heights are equal to the edges of the decagon at the bottom.
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant
This is a zoom knob replacemente for the Libec ZC-9Pro
Print approx. €0.40–€0.48 excl. taxPreliminary estimate for one variant
Whether you're parked lakeside or dreaming about your next road trip, the Camper Life coaster brings adventure to your table. This coaster is designed for single-extruder printers—with built-in extrusion zones and preconfigured pause…
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant
Variable spacers for drawers drawer slides. Description : I have built several cabinets with doors and drawers drawer slides for a shelving system. To be able to adjust the width of the drawers there are spacer discs from a manufacturer.…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
einfache scheiben mit denen sie z.b. einen verzogenen Tisch wieder Wackelfrei machen.
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for PETGSource material: PET
I am building a section of the PiBeta calorimeter to do a fit check for some parts to go inside it. The pentagonal shape is what the rest of the hexagonal pieces are arranged around.
Print approx. €18.24–€22.29 excl. taxPreliminary estimate for one variant
This model was made for a Plasmonics Internship, where I had to secure the optical fiber. It has a special end to it from another equipment, which I do not record (probably a spectrometer). This model was, in part, inspired by the "…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
Die Muskatreibe wird passgenau mit originaler Schutzhülle in den Aufbewahrungszylinder gesteckt+ Muskatnuss Aufbewahrung mit gut schließendem Deckel. Das ganze in PETG.
Print approx. €3.27–€4.00 excl. taxPreliminary estimate for PETGSource material: PET
Note: New Prusaprinters account email: [email protected] or Nolan McCracken This is the Statue of Liberty. It is 9.265 inches tall and has a 2.795x2.795 inch base. This is the Statue of Liberty. It is 23.5331 centimeters tall…
Christmas tree ornaments for vase mode printing. When using light or transparent filament you can use a tea light to lightup the tree. The big tree is 150 mm tall and the small tree 100 mm You can get a permission to commercial use of…
Michelin Bibendum puppet. Designed by Vvardloc and uploaded here with their permission. To properly print it rotate it sligtly to the back and add supports. This creates the best results. If anyone has any questions please contact me,…
Do you like Managed Democracy? Well now you can spread it all over your local airsoft field! When I posted the original Backhammer kit for the PLR-16, people brought up its similarity to the Liberator from Helldivers, and suggested that I…
This is why I would never, ever allow a player bring a 3D-printed d20 to any of my games! It's just too easy to load the dice if you print 'em yourself. On the other hand, they would be OK for a player to use as a substitute for the…
2-Chamber High-Decibel Whistle This is a compact, high-performance whistle engineered with four distinct acoustic chambers. It is designed to maximize volume and create an attention-grabbing, multi-tonal sound signature. I added a…
Please read this before downloading/printing! This is our new airless basketball model made for the Fiberology FiberFlex 30D filament. This filament has the best bounce and durability out of all of the airless basketballs/airless…
A modular, 2-part, 19-inch rack mount for the Ubiquiti Unifi UCG-Fiber cloud gateway. This mount is part of a 19-inch modular rack mount system I designed. You can mix and match the modules with other mounts. Take a look at my models here…
Loved to make Mickey Mouse in a chill pose, with his hands casually tucked in his pockets, giving off a relaxed vibe while still conveying an aura of confidence and ease. --- For any inquieries, please don't hesitate to contact me. ---…
🔥 Cover up that boring lighter! 🔥 Always have a flame on hand with four different styles to match your vibe or your mood! If you don't want to add a lighter to your janitor-sized wad of keys, then I have just the thing for you! I have…
Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words Category: Construction Toys
🔥 Cover up that boring lighter! 🔥 Always have a flame on hand with three different styles to match your vibe or your mood! If you don't want to add a lighter to your janitor-sized wad of keys, then I have just the thing for you! I have…
I had long intended to print the Statue of Liberty in 1:1000. Since it is one of the strongest symbols, which was also very important in the time of the Ocean Liners. For many immigrants it was the symbol of freedom and the first desired…
The original had a rough poly scale in some places like the robe, I didn't like the low poly look, so I reworked it in Blender. Remeshed, smoothed some parts manually, subsurface modifiers, resulting in resolution improvements. There is…
A 10-inch rack mount for the Ubiquiti Unifi UCG-Fiber cloud gateway. This model comes in 4 variants: With front cutout for power cable routing With holes for M3 thread inserts. → UCG-Fiber 10i RM for Thread Inserts.stl With holes for…
This is a remix of the model https://cults3d.com/en/3d-model/architecture/statue-of-liberty-national-monument by peternak3d, which has many issues with printability. There is also a small part from https://www.thingiverse.com/thing:65869…
This Tower is 140mm high and has an inner channel for balls. No print support structure needed. Thanks for download. 09/01/24 update outlet See video for demonstration:
Here are some ammunition models of various caliber. They're good for props or demonstration purposes. Here are the calibers that I currently have: -.22 LR -7.62x25mm Tokarev -.32 ACP (.32 Auto) -.380 ACP (.380 Auto, 9mm Short) -9mm Para…
For engraving up to 11 pens or ballpoint pens simultaneously with the xTool F1. A placement map for xTool Creative Space is also available. Update: The placement map file has been updated for xTool Creative Space 2.x, including grouped…
The only thing worse that the subscription model, are overpriced accessories that should have been included! I made this for myself, as I will only use it with a 2280. So, if you're are only going to use a 2280 too, have at it. Includes a…
Update: 23.01.2014 added separate files for each curved track also added a new radio curved track for really big curve :-) The normal curve should be the Kurve_180_45.stl Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words…
Hello everyone, learn the technique to reproduce the texture of carbon fiber on any printer, using normal materials. Please watch the youtube video, and feel free to like, subscribe and share! Feel free to comment on improvements and…
A modular, 2-part, 19-inch rack mount for the Ubiquiti Unifi UCG-Fiber Power Supply Unit (PSU). This model comes in 4 variations: A plain mount, just for the PSU. A version with keystone slots. A version with a shelf. A version with the…
4-Tone Quad-Chamber High-Decibel Whistle This is a compact, high-performance whistle engineered with four distinct acoustic chambers. It is designed to maximize volume and create an attention-grabbing, multi-tonal sound signature.…
The redesigned version of the original Prusa Pulley for PC-Blend. This lighter version saves material but is still perfectly strong using the PC-Blend Carbon Fiber. PC-Blend Carbon Fiber is slightly lighter than unmodified PC-Blend, with…
The source marked this model as adult content.
Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words printing on the sind works for me .. a new version v2: a little higer so that can drive an train under the upper rails Category: Mechanical Toys
A large, stylish desk or shelf ornament filled with good vibes only. I designed this sign in Figma and Fusion360 to learn multi-color workflows, and bring good vibes to my workspace. The finished print can stand on its own and looks…
I downloaded it from 3dvia.com. Here is the original link: http://www.3dvia.com/models/B7D49BADBF91A3B5/statue-of-liberty Category: Sculptures
Remixed from Thingiverse User thomasdr if you like my model please leave a like there
A new 3D figurine generated by AI, Bibendum Michelin. Do not forget to LIKE, to download and to upload your makes, thanks ! Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Una nueva arma para la colección DUMMY 13
UPDATE I'm working on printing this and I think it might be a little small. The printer is having some trouble with the statue's details. I'm going to try a slightly larger model and see how it works and I'll update the files here soon.…
Overview A good starting point for the Fiberon line of filaments for the Qidi Plus 4. These filament profiles are for a .4 nozzle and are for Orca Slicer . Download Download the file normally, this should open up the file in a new tab in…
**Add texture to your pieces!** Tired of printing those dull flat bases or just using the "Hilbert curves" pattern? Your problems are over! print the carbon fiber texture right now, on your PLA pieces (or any other material you want), and…
I want to create a stand for the FritzBox 7590 AX V2 which provides the following features: parts shall easy to mount to the Router the router should be placed tilted to have a good ventilation to the board inside all connector should be…
Opening model of planetary gearbox for Prusament PA11 Carbon Fiber. The model was specially designed for this type of material as a presentation of the applicability of polyamide material in practice. This is a working model of the…
Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words Category: Mechanical Toys
Design: This model is fully modular and has been designed with focus on quality, so the whole trophy is printed in several different pieces that need to be assembled. The center piece was designed as being removable so you can design your…
This model was originally on Printables where the creator posted his .step file for editing. It's been mixed a few times but as the smaller Max and Ultra Unifi models. This is for the Unifi Cloud Gateway Fibe r unit. It's a wall mount…
dd-liberator DD Liberator 3D Gun Blueprint This is the Defense Distributed 3D Printed Gun Template. State Department Demands Blueprint Removed: http://techcrunch.com/2013/05/09/state-department-demands-3-d-gun-blueprints-be-removed/ ITAR:…
Liber-tea mug modeled like it's made from a 40mm grenade casing. Did make it a little large (more of a stein than a mug) but it can just be rescaled to whatever size you like.
Remix de la copa libertadores para usar como llavero
A miniature interpretation of the Statue of Liberty, reduced to its essential form while preserving its iconic silhouette and symbolic presence. Part of the Tiny Landmarks collection, this piece translates one of the most recognizable…
Modularer Uhrenständer & Organizer – flexibel erweiterbar Ich habe einen modularen Uhrenständer konstruiert, der komplett selbst 3D-gedruckt werden kann. Das System ist flexibel aufgebaut und lässt sich passend zur eigenen Uhrensammlung…
Das Frisbee ist sehr leicht und hat tolle Flugeigenschaften. Ich habe es so konstruiert, dass es auch von kleineren Kindern leicht geworfen werden kann. Beim Wurf muss die die Seite mit dem Rand (der Erhöhung) nach unten schaue. Somit…
The U-Scribe Jig is designed to make scribing simpler, easier and improve consistancy, It's as simple as Attach, slide, scribe, cut and fit.
A Pica pencil version of DSkolnik offset scribe Block. Deleted the original pencil holder and added a 5.9mm hole for the shaft of a Pica automatic pencil. Fit is snug, and helps to add a little pressure to the pencil. Other than that, a…
a simple but loud whistle
This is a cooler that mounts on top of the UCG-Fiber to cool the SFP+ port. Specifically made for the WAS-110 and X-ONU-SFPP modules. You can find pre-soldered DIY fan + power module kits here: https://exen.sh/products/diy-kit-ucgf-cooler
![Rope / cable / fiber hanger for horizontal rods [parametric]](https://media.printables.com/media/prints/756522/images/5900593_ef8be5bb-4fa3-4757-a435-cf7725dd69f4_eebecbba-ebad-4e1b-b4ad-39393213dfc3/in_use.jpeg)
![Mickey Mouse - Chill Vibes (Fanart) [Single Piece]](https://media.printables.com/media/prints/532318/images/4478139_fe98b39f-8596-44f3-948a-f3a21f644519/mickey-mouse-fanart_render.jpg)
