Counting matching models…
GRIDPAC.ONE is the all-in-one printable storage case designed to unify your workspace whether you're deep in the Gridfinity ecosystem or using your own custom inserts. It matches the outer dimensions of Systainer Classic (compatible with…
The screw is now reverse thread, so counter clockwise screws it in. you will need to glue the clip to the body, i use epoxy. I added an extended clip, this pushes the dispenser out away from you, - i found that my clothing was getting in…
This is a tape dispenser for tape with patches for IPSC targets. It can hold a tape 23mm with 1000 patches 20 mm in diameter. The hook must be glued on the back. The screw can be unscrewed with coin €1, €2 or 50 cents. It has an opening…
OVERVIEW This project is a 1.5-inch IDPA-focused competition gun belt designed to be manufactured on a consumer FDM 3D printer and assembled using inexpensive off-the-shelf hardware. The goal was to create a lightweight, modular,…
Miniaturized target for dry fire practice at home. Target mounts into a single or dual bracket configuration. I put the brackets in a cheap telescoping tripod / selfie stick from Amazon - makes adjusting height super easy. Target is blank…
IDPA box. You can check the check to make sure your gun fits your division. IDPA BOX - is for SSP, ESP, SPD - 8 ¾” x 6”
mini Idpa target for dry fire practice
4 or 3 parts in total: body, cover, screw and wrench (wrench is optional). Any plastic of your choice. Minimum supports (locally on cover and key). Shooting Stickers: https://aliexpress.ru/item/1005008518087267.html More information on my…
Voron0 MidPanel with Hex pattern print settings: layer height: 0.2mm color change at 0.6mm / 2.2mm V0.1 hardware: 4 x M3x8 BHCS 4 x M3 nut V0.0: Compatibility: Pocketwatch Z Belt mod hardware: 8 x M3x6 BHCS 8 x M3 Threaded Insert 4 x M3x8…
We designed a custom measurement boxes according to the rulebooks with 7.5mm thick walls for increased durability. IDPA boxes can be stacked into eachother for better storage. Rulebook internal dimensions for the box 8 3/4” x 6” x 1 5/8”…
Just another arm feet for the TBS Source One v3 frame. Approved by the international curling association. Height is 7mm. You'll need 1mm longer bolts. Print Settings Resolution: 0.2 Infill: 20, Gyroid Filament: Bestfilament PETG Light…
The box consists of three parts: the main box, which is used to check guns for compliance with SSP, ESP, and CDP division dimensions, and two inserts. The first insert is for the CCP division, while the second insert is for the BUG…
Simple IDPA target with no numbers, with a stand for Dryfire Practice. This is a remix Target designed by QuietMike. This is a quick remix of a model I originally made for myself, but I wanted to upload it in case anyone else wanted a…
Original https://www.thingiverse.com/thing:5356923 These are the seperated files. MM files no longer have color change.
A right hand and right foot silhouette. both are 3/8" thick. The foot has a spine with reinforced holes for long nails up to 1/2" diameter and large chamfers to help the head sit below flush as well as channels to aid in removal. The hand…
BMW R1300GS Vario Side Pannier strap eyelet replacement with skidpads in different colors, if you dont like the original black ones or dont need eyelets at all. The skidpads on the title picture are printed in PETG Galaxy Silver Mounting…
BMW R1300GS Vario Topcase strap eyelet replacement with skidpads in different colors, if you dont need the eyelets. The skidpads on the title picture are printed in PETG Galaxy Silver Mounting instructions Remove the original strap…
A quick one by request. This is simply a clip to fasten two panels inline with each other on opposite sides of a 2020 extrusion. The initial use case was to allow creating a tophat mod without additional 2020 framing where it meets the…
OVERVIEW This project contains split versions of my IDPA equipment check boxes for printers that cannot accommodate the full-size one-piece models. Each box is divided into four printable components that are assembled using M4 heat-set…
Enlarged dispenser was desired for patch-spools of outer diameter ~95mm, while other dimensions remain same. Printed in PLA
OVERVIEW This project is a 1.5-inch IDPA-focused competition gun belt designed to be manufactured on a consumer FDM 3D printer and assembled using inexpensive off-the-shelf hardware. The goal was to create a lightweight, modular,…
The screw is now reverse thread, so counter clockwise screws it in. you will need to glue the clip to the body, i use epoxy. I added an extended clip, this pushes the dispenser out away from you, - i found that my clothing was getting in…
OVERVIEW This project is a 1.5-inch IDPA-focused competition gun belt designed to be manufactured on a consumer FDM 3D printer and assembled using inexpensive off-the-shelf hardware. The goal was to create a lightweight, modular,…
We designed a custom measurement boxes according to the rulebooks with 7.5mm thick walls for increased durability. IDPA boxes can be stacked into eachother for better storage. Rulebook internal dimensions for the box 7 3/4” x 5 3/8” x 1…
We designed a custom measurement boxes according to the rulebooks with 7.5mm thick walls for increased durability. IDPA boxes can be stacked into eachother for better storage. Rulebook internal dimensions for the box 6 1/2” x 4 5/8” x 1…
