Counting matching models…
This is my take on the Morrigan Class Patrol Destroyer from the MCRN. It is done to scale to my Rocinante model. The model is once again kit so no glue needed. It has two features: Retractable PDCs - the same as on the Roci. Retractable…
Giganotosaurus scanned with revopoint POP3 Plus and printing resin
Morrigan Rock Bouncer 1:8 Scale: __________________________________________________________________________________________________________________ Are you new to Black Crow Prints? All the STL files are here free on Printables.com. A non…
************************************************************************************************** These transmissions are intended for use with “Thumper” and “Morrigan” 1:8 scale models. Thumper -…
A kit card figurine/sculpture of a giganotosaurus. An adhesive may be required depending on tolerance. I used super glue.
!!!!!! It has come to my attention that not all 40T gears are the same. Some have a much bigger shoulder and are much thicker. I got mine on Amazon. link below. The wrong 40T has an option of a shaft up to 15mm, The cheaper version only…
This is a Giganotosaurus model consisting of 11 parts, capable of limited articulation after assembly. The leg joints are printed as a single piece, with a 0.2 mm gap reserved for movement. If the joints cannot move, it means the…
I've included the print profile as well as the singular items. Printed in PLA. Perfect for tailgating or a decoration for your mancave. I am selling this item on Etsy so please do not post it for sale. I've also included a .3mf file and a…
Printed in PETG. 150mm/s. 235 degrees c. No supports or bed adhesion.
Show your school spirit with an oversized Michigan State University Spartan Logo Chain Necklace. Perfect to wear to a sports game, tailgating or to graduation! I've included the STL & 3mf file as well. My print settings were: Layer…
Source: https://drive.google.com/drive/folders/0B5j1iQ1NUCTcak1KRU8zWFZpQjQ Print Settings Notes: I recommend to use a bit of horizontal expansion, like 0.5 Category: Models
this is the Hoonicorn a 1965 (maybe?) it is from ken blocks car stunt series gymkhana if you have seen it great if you haven't I highly recommend it if you like cars. this was one of his cars that he used probably his favorite.
Sliced version of https://www.thingiverse.com/thing:4098730 file name explanation: First char: A = arm, B = body, H = head, L = leg, W = wing, T = tail second char: L= left, R = right S suffix = spikes Union-ing spikes resulted in failure…
Michigan J. Frog - Looney Tunes The dancing frog. He is in one short only called “One Froggy Evening.” https://www.youtube.com/watch?v=evgEJlOPoeo
Here is a Halligan Bottle opener. I modeled it after the metal halligan bottle opener. I modeled an ax to mate together. I also made half models incase you cannot print the whole thing. Will need support. Used some heat to assemble if…
A miniature tribute to one of college football’s most legendary arenas — Michigan Stadium, “The Big House.” This 3D printable model captures the iconic elliptical bowl, tiered seating, recessed field, and outer facade in a clean…
Giganotosaurus z filmu Jurský Svět Nadvláda
Be persistent like a mosquito, at the end you will get your bite! (Easy to print NO raft or support needed) Feel free to join my YouTube 'Channel if you want to see more of my cool projects or printer reviews https://bit.ly/2NonEXS Print…
Any feedback would be greatly appreciated . SVG designed by camilahdezmiau, check her portafolio here: https://www.behance.net/gallery/108613589/Portafolio 1.- Print the lines in black color. 2.- Print the cardigan (white color) changing…
Revel in the excitement of 3D printing with the intricately detailed Kerrigan Bust 3D Model, designed exclusively for avid hobbyists and gaming enthusiasts. This support-less 3D bust has been prepped and primed for printing, mirroring…
Michigan, USA (MI) Topographic Relief Map with Rivers and Coastal Waters Michigan, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of Plastic…
Morrigan's Aftermarket parts: Prefix part numbers. Example : All parts starting with A will be Wide Wheels A- 46mm Wide Wheels for 60mm wide AG tires. (over all makes model 14mm wider) 3mm inward and 7mm outward from original wheels.…
The regular 3mf files are Bambu Studio specific and include coloring. The generic versions are for people without Bambu Studio. I separately published the CAD files for the M inset into the bottom of the box. The M on the outside of the…
This is a model of The Big House, the University of Michigan football stadium. I printed this model out of yellow and blue dual color PLA with a 0.6mm nozzle, 0.2mm layer height, 5% infill, and a little bit of fuzzy skin. I also used…
Show your Spartan spirit with this Michigan State University key fob - original was made by drzook on Thingiverse. I scaled it down to 1 inch wide/1.1 inch tall and used Galaxy Green PLA Prusament filament. The glitter green is perfect…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Designed as a Christmas Gift Made in multiple parts. Print one of each. Print the drawers slightly scaled down so they fit nicely. This will require glue. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No…
Gengar Gigantamax in a Swamp (Pokemon) キョダイマックス ゲンガー MMU Multi colour part design Category: Sculptures
Any feedback would be greatly appreciated . SVG designed by camilahdezmiau, check her portafolio here: https://www.behance.net/gallery/108613589/Portafolio Nozzle: 0.4 Layer: 0.2-0.24 (Recommended) No Supports needed Scale it as you like :)
This is a tribute to the iconic fantasy movie charming scoundrel, an unforgettable performance by Val Kilmer, who passed away 2 days ago. Model created so that it does not need any supports and prints well on a cheap FDM 3d printer like…
First, I would like to thank BlackCrow (RockyTop) for his cooperation and permission to post these remixes. It is an honor for me to contribute to his excellent work with these remixes. 30.06.2024 added new clip for the powerbutton…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
University of Michigan Coaster. The Photos look black, but they are a very deep blue.
Gigantosaurus mini decoración o juguete.
I am not a Michigan fan at all. I made this as a gag gift for an Ohio State fan. But it works!
Gigantamax Gengar in a Swamp (Pokemon) キョダイマックス ゲンガー You will need to enlarge the model for an FDM printer. Support file is for a resin printer with all the supports, hollowed and drainage holes Category: Sculptures
Map of the state of Michigan, USA Note that the upper peninsula piece will print separate from the rest of the state
There are few things as annoying as broken parts for which you can't get a replacement. It is especially stupid when the part you need plays a central role. For example, the mounting for the table in the dinette of the motorhome or van.…
I was bored at work so i made a baby Halligan. its about the length of a standard ink pen. great for those just in case emergency at work
I printed it at 20% infill on an Anycubic Vyper at a .15mm layer height and it turned out great! I printed the outside in Polymaker Blue PLA and the insert in Overture Gold PLA. Designed in Fusion 360.
Giganotosaurus carolinii was one of the largest meat-eating dinosaurs , possibly even bigger than T. rex, but it had a lighter, more slender skull , built for speed rather than crushing power. Sculpted in blender, the model is divided…
An easier to spin and fun to play with version of the amazing Gear Bearing by emmett. Thank by the way! Customized version of https://www.thingiverse.com/thing:53451 Created with Customizer!…
pulpo gigante para tener de decoracion muy buen modelo no necesita soportes se imprime rapido
1:36 scale model of a gigantoraptor, a large species of oviraptor. The model features detailed scale and feather texturing along the model. I created two variants of the model, standing and posed. I recommend printing it at a finer layer…
this dinosaur comes from the movie Jurassic World Dominion
Michigan J. Frog "Hello my baby, hello my honey, hello my ragtime gal! Send me a kiss by wire, baby my heart's on fire!" Single extruder multi-color print First layer: White Second layer: Yellow Third layer: Green Fourth layer: Red Fifth…
Here is a coaster for the Michigan State University fan in your life! This was originally made by Leejy936 on Thingieverse. I printed this with 15% infill using Bambu Labs Basic PLA in Bambu Green and Jade White. You can print this…
english Replaces the broken snapper of the Deuter backpack “Gigant” Recommended thickness: 0.1 mm - 0.15mm Perimeter: 3 Infill: 40 - 60 Material: PETG Fusion 360 file included Update 2026-feb-01 Over time, it has become apparent that the…
You will need to set the three different color layers appropriately in the slicer. No supports required. Really like this sign? You can get a Periodic Table “Shenanigans” T-shirt in my Etsy shop at: www.fallingentropy.etsy.com Just go to…
For the drone Eintagsfliege, most support are designed in place, be careful when removing the stem on the body from the cone support. A 1.1mm drill may be needed to clean the hole in the wing before plug in the stem. Higanbana Flower…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
To commemorate the national title, I drafted this banner to be printed in three colors. Best to load up the 3MF file. You can then select each of the color groups in the slicer to color the file. NOTE: The colors are not layered so cannot…
Back with another piece of operator kit for cosplay! This one should be fairly straightforward in terms of assembly. The Rod connecting the head and crowbar part is optional and can be replaced by any rod with the diameter of 20mm. If you…
Michigan Wolverines Oversized Necklace Logo that I designed. I hope you enjoy!
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
If you want another U.S. city, international landmark, or custom project – just send me a message and I'm ready to get to work! Discover the bold architecture and vibrant energy of the Windy City with this detailed 3D model of the Chicago…
Not sure what car this is out of. If you know leave in comments. -RIP-
Hello everyone, This is my design for a Shantungosaurus Giganteus statue. A high-precision model!! I hope you like it. If you have any questions, please feel free to ask. Happy printing!
Model for cutting the top part of your bread dough. Fits for a normal razorblade and 2 m3x6 screws gedruckt mit PETG in 15 mm Layer höhe mit meinem mk3. Die Kappe mit Supports gedruckt printed in 15 mm Layer height with PETG. cap printed…
couldn't find a good Michigan key-chain, so I made one! Works good with color pause or m600 command
Thats... something to not take serious. https://www.thingiverse.com/BillieRuben/about did a micro keyboard thing with her Anycubic Photon, and i thought to reproduce that (more or less) on an FDM machine. Its nowhere near the quality, and…
This brigantine tall ship prints in three parts: the hull (Part 1) at 100% infill for buoyancy and stability, and the upper structures (Parts 2 and 3) at 10% infill to reduce weight. The assembled model floats and balances well, making it…
I printed this on a bambu p1s but any printer should work.
Simple Hoonigan stencil with drip effect. Make sure to edit thickness to your liking, again it doesn't need much as a stencil, but you may want more if you mount it in a high traffic area.
This is the final version of my golf simulator control box that has one button mulligan and heat map. parts can be found on my website https://www.bacustomproducts.com/ check out you tube for assembly instructions…
Gilligan's Island - Gilligan - 1964 3D printable model.
This is based on the handbrake grip from Ken Block's Cossie V2. The inlay parts need to be glued in. Two part epoxy works well. The inner diameter is 1".
Unleash your inner demon with the Morrigan's Headband, perfect for cosplay and gothic fantasy enthusiasts. This headband features stunning batwings and curved spikes, embodying the winged, textured allure of a mystical creature. Printing…
Michigan State University Plaque for your wall or desktop. Created by quinkert on Thingiverse
Just a Halligan bar. It prints best with the spike up. It's tiny so you do have to scale it up quite a bit, 500%-600%.
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
This is a Michigan Plate for the Little Tikes Cozy Coupe. You can use your slicer to add a stop when the lettering is up and switch from Blue to White filament. Also your slicer should be able to insert your child's name or other word.…
Show your school spirit with an oversized Okemos (Michigan) Wolves Chain Necklace. Perfect to wear to a sports game or to graduation! I've included the STL & 3mf file as well. My print settings were: Layer height: 0.2mm Nozzle: 0.4mm 10%…
Michigan National Champions Plaque
Here are some state of Michigan stencils - originally made by EXP10 on Thingiverse. I also shared the gcode of the stencil that I modified to make it a little thicker to make the stencil more substantial.
A highly detailed 3D model of the legendary Kaiju Gigan , perfect for collectors, dioramas, or as a stunning display piece! This model captures the iconic Mecha-Kaiju with its blade arms, spiked back fin, and detailed scale armor. Ideal…
Michigan State Spartans Oversized Necklace Logo that I designed. I hope you enjoy!
Add a filament change to get the M in yellow Show your Wolverine pride with this custom University of Michigan-themed Croc charm ! Designed to fit snugly into standard Croc holes, this little accessory is a fun way to rep U of M on the go…
Diorama del “THE IRON GIANT”. La mia stampa è molto piccola, si consiglia di farla piu' grande per ottenere un risultato eccezionale
The version in the photograph was printed with creality wood-fill filament which worked wonderfully and created the finish I was looking for. Happy printing :)
Simple coaster featuring the signature chant of MSU Spartan fans. Can be printed in multicolor or single color.
Almacén en forma de crayola Almacén multiusos en forma de crayola Version seccionada sigue en fase de prueba
Morrigan, surnommée « Mor », est un personnage central de la saga Un palais d'épines et de roses ( ACOTAR ) de Sarah J. Maas. Bras droit et cousine de Rhysand, elle est connue pour sa loyauté indéfectible et son importance cruciale au…
Our whole-home water filter is in an odd spot, which makes it difficult to get good leverage with the original short-handle wrench. So, I created an exact copy with an extended handle. I printed it in PETG, and it's been through two…
I do comprehensive 3D scanning and you can see some of my results here. The models are partially edited with AI due to small or missing details. If you are interested in my work and have a specific interest, you can write to me and my…
I saw this sign up in Michigan, so I decided to come home and model it. (4) 6mmx3mm magnets hold the sign to the posts.
This is a large M based on the Michigan logo. It is way oversized. I converted a jpg to dxf and imported into Solidworks. A good example scale is 0.1%. Yes, that small. This was used to inset the M into the bottom of a box holding…
You may have downloaded my breaching Ram and thought to yourself, “How does my Dummy get into an outward opening door?”. Well my friend, your Dummy 13 breacher will now be better equipped to handle this situation! This Halligan tool, used…
This is a reproduction of the popluar 60's tv show of the name. Since the show stated in B&W and then when in color was just yellow, this model follows the lunchbox and merchandise of the show to give it more color and depth. This model…
Michigan University Wolverine Earrings I print all of my earrings and keychains with a .2 nozzle Layered. No AMS/MMU/Ace/CFS/Chroma needed. Just color swap at layer. Can be made into a pendant and/or Keychain by scaling up. Check out my…
A low poly topographical map of the great lakes along with surrounding states (Minnesota, Wisconsin, Illinois, Indiana, Michigan, Ohio, Pennsylvania, and New York). Happy printing :)
Due to the slant, the MCRN logo did not look so nice as a multi-colour print, so I decided to extract the logo and glue it separately onto the component. Attention: before printing, the individual parts must be laid flat on the print bed…
Are you ready for a truly gigantic toy? This fidget cube is gigantic in size, but still only requires l ess than 80g of filament . For gigantic fun, but not for wimps with two left hands. Printing instructions Before you start printing:…
