P
PrintablesProtyle Designs
Modern Catchall Bowl - Filte III
A modern style catchall bowl. Enjoy!
- Downloads
- 6,286
- Likes
- 1,168
- Rating
- 4.96
Search results: iii
Counting matching models…
P
PrintablesDario A. R.
Panzer VIII "Maus" Tank
Remix of the amazing Maus easy print model by WindhamGraves on Thingiverse. I realigned the barrel with the turret and separated it for more reliable and cleaner printing upright without supports. Also cleaned up some geometry. The…
- Downloads
- 5,575
- Likes
- 395
- Rating
- 4.89
P
PrintablesJerryie
Subaru Impreza WRX STi Sedan (III gen) kit card
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
- Downloads
- 3,300
- Likes
- 758
- Rating
- 4.56
P
PrintablesPeter Farell
Assassins Creed III Conner.
Assassins Creed III Conner.
- Downloads
- 2,285
- Likes
- 482
- Rating
- 4.5
P
PrintablesNakozen
C-17 Globemaster III Kit Card
The C-17 Globemaster III is a large military transport aircraft that has been in service around the world for the last 30 years. Created as a paid commission for ChmNrd , the same legend who commissioned the C-130 Hercules Kit ! EDIT:…
- Downloads
- 2,112
- Likes
- 417
- Rating
- 4.74
P
PrintablesKersey Fabrications
Iron Man Mark III Helmet Separated and Oriented
This is a remix of the original MIPRESIDENTE Iron Man Mark III helmet posted here on Thingiverse. My goal was to separate the model, orient in the best printing direction, do a little clean-up, and then publish them as ready-to-print. A…
- Downloads
- 1,943
- Likes
- 486
- Rating
- 3.4
P
PrintablesJS-studio
Red XIII statue
My version of the statue of Red XIII from the FINAL FANTASY VII Remake. It is divided into 29 parts for easier printing and preservation of all details. I hope you will like it Print instructions I tried to turn each part straight for…
- Downloads
- 1,393
- Likes
- 215
- Rating
- 5
P
PrintablesThe Cyber Hobbit
Red XIII - Final Fantasy 7 Polygon Model
This is a model of Final Fantasy 7 Red XIII in simple polygon form. If you downloaded the other Cloud Strife Model, I mentioned I had to scale it to 15% when printing. For this model I ended up fixing his tail and hair because they were…
- Downloads
- 1,137
- Likes
- 199
- Rating
- 4.75
P
PrintablesBuřina 3D
Iron Man Mark III
As a huge Iron Man fan, I felt the original model had a great foundation but deserved more attention to detail to truly stand out on a display shelf. I spent hours refining the geometry and adding features that were either too subtle or…
- Downloads
- 925
- Likes
- 86
- Rating
- 5
P
PrintablesJace1969
Spiderman Helmet MIII
Hi Todd, this was all I could do. Not sure how easy it will be to fit over your head due to the size of the neck ring. I've removed it from the second model incase that helps but it may need modifying further. I have an idea which i'll…
- Downloads
- 881
- Likes
- 163
- Rating
- 5
P
Printablespolymech3D
Armadillo Off-Road Truck 1/10 body for SCX10 III
Armadillo off-road truck body for SCX10 III Hard body that has been designed to fit the SCX10 III Base Camp builder's kit chassis (AXI03011). The body might fit other 313mm chassis as well but the mounts need to modified accordingly.…
- Downloads
- 832
- Likes
- 244
- Rating
- 5
P
Printables3DGearSupply
Ruger Mark MK 1 2 3 4 I II III IV Speed Loader
Save those finger tips! can be used on any ruger mk magazine as well as browning buck mark magazines and probably more!
- Downloads
- 822
- Likes
- 63
- Rating
- 5
P
PrintablesMoonDogg
IIIDMAX PLA+ Filament profile for Bambu Lab X1C
I could not find a profile for IIIDMAX filament so I created my own. I tuned it with Orca Slicer calibration tools. Temperature, flow rate, pressure advance and max volumetric speed was calibrated. I hope this helps someone. I welcome any…
- Downloads
- 797
- Likes
- 47
- Rating
- 5
P
PrintablesVK1HF
BaMaKey TP-iii / TP-3 paddle holder - BaMaTech - Mk2
A Little holder/protector for your BaMaKey TP-iii - from BaMaTech. Pretty self explanatory. The main holder slides nicely into the outer sleeve - like a matchbox etc. There is a recess and a tab to keep it clicked shut - works well. There…
- Downloads
- 727
- Likes
- 32
- Rating
- 4.75
P
PrintablesŠotouš Králíček
Solaris Urbino 12M III gen.
Solaris Urbino IV 10 UPDATE aug'20 | 3D Warehouse (sketchup.com) - odsud staženo
- Downloads
- 723
- Likes
- 12
- Rating
- 0
P
PrintablesfD667
Snoopy Door Corner III.
You can easily scale the print file, but make sure that the height (Z) remains at 3mm. Print mirrored to give the model a better surface = face down for PEI boards ;).
- Downloads
- 721
- Likes
- 99
- Rating
- 5
P
PrintablesNorbert Oríšek
Dacia Sandero III phone holder
Printed from PETG or ABS 2mm walls, infil 40% Printed with supports
- Downloads
- 700
- Likes
- 40
- Rating
- 5
P
PrintablesKnajcik
Air Jordan III pen holder
End Caps for Open V-Slot 2020 with Open Hardware logo. This is a remix from https://www.thingiverse.com/thing:398515 Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.12 Infill: 20%…
- Downloads
- 695
- Likes
- 54
- Rating
- 4.67
P
PrintablesJerryie
Valentine Mk III British WW2 tank 1/72
-Two colors -organic support -0.15 layer height
- Downloads
- 582
- Likes
- 124
- Rating
- 5
P
PrintablesPitt817
Star Wars The Force Unleashed Phase III 3 Triton Squad Black Series Helmet
The Helmet was Modified from a free cosplay file on the whitearmor.net forums All Credit goes to Skylu3D and DeltaReynold for the phase 3 helmet model. A phase 3 Commander back pack is avaible for purchase on Skylu's CGtrader. Feel free…
- Downloads
- 582
- Likes
- 175
- Rating
- 5
P
Printablesphildesign3d
Swiss Railways Crocodile CE 6/8 iii 1:32
This decorative model at scale 1:32 is the famous Swiss Railways Crocodile locomotive born in 1919 for pulling freight trains through the Gotthard mountain. This CE 6/8 iii is the third serie built in 1925-1926 and numbered 14301-14318.…
- Downloads
- 574
- Likes
- 69
- Rating
- 5
P
PrintablesCaseStudyno8
Obi-Wan Kenobi's Lightsaber (Episode III)
After I got my printer, the first thing I printed was Jacky Wan's lightsaber based off of Obi-Wan's saber from episode IV. Afterwards I wanted to print everyone's lightsaber hilt, but the selection was lacking, so about a year ago I…
- Downloads
- 561
- Likes
- 124
- Rating
- 4.88
P
PrintablesAaronTMG
Landcaster B MK III British bomber
The Lancaster has its origins in the twin-engine Avro Manchester which had been developed during the late 1930s in response to the Air Ministry Specification P.13/36 for a medium bomber for "world-wide use" which could carry a torpedo…
- Downloads
- 548
- Likes
- 27
- Rating
- 1
P
PrintablesGrain
Renault Megane Mk III Lumbar Support Lever Cap
The cap for the lumbar support adjustment lever of a Renault Megane Mk3. it is is designed to only fit in the correct position.
- Downloads
- 540
- Likes
- 25
- Rating
- 5
P
PrintablesMakkuro
Customizable text box III
Have a rounded box for your stuff - now the box itself says what's inside. Use OpenSCAD to adapt the text and sizes as needed. You can print the box without supports: This version III now allows to enter the angle at which the box sweeps…
- Downloads
- 509
- Likes
- 100
- Rating
- 5
P
PrintablesJollyRogerX
Another StuG III (1/20 scale)
This is a 1/20th scale StuG III. I was not trying to create a historically correct model, just a model that would be reasonably fun to put together, look decent, and not send you to the hardware store for more pieces to complete.…
- Downloads
- 507
- Likes
- 173
- Rating
- 5
P
PrintablesLockwatcher
The Puzzle Gift Box III
The Puzzle Box III NIce easy Puzzle Box - great way to give a small gift. Once closed, the box is very eay to open - if you know how! I have seen people puzzle on this for an hour+ - but if you know how, you can intantly open the box -…
- Downloads
- 482
- Likes
- 67
- Rating
- 4.67
P
PrintablesJasonCharlton
Baddeley MKIII Center Vent Speaker Adapter
One of the most common places to mount speakers in the Baddeley R2D2 is behind the center vents. In the MKIII design, there are mounting holes available that will fit a small, 3" speaker and allow it to be mounted flush to the center vent…
- Downloads
- 479
- Likes
- 36
- Rating
- 5
P
PrintablesThomas
GST3D / IIID Max Spool Ring for Bambu Labs AMS (+ Hydra Mod)
While the filament form GST3D is super cheap and works pretty well I had a lot of trouble together with the Bambu Lab AMS. I have the Hydra Mod, But I assume the same problems are true for the vanilla version. There is a ring adapter, but…
- Downloads
- 472
- Likes
- 48
- Rating
- 5
P
Printablesahead_RC
SCX10 iii Gladiator Flatbed
Want an overland style SCX10 iii Gladiator? You can now build one! The flat bed originally designed and printed for our SCX10 iii Gladiator Aussie Style Overland build . The flatbed comes with 2 different versions of an oversized, extra…
- Downloads
- 463
- Likes
- 95
- Rating
- 5
P
PrintablesEebel
Astromech Bread Pan Tool Lift Mechanisms for Mark III
Tool lift and actuate mechanisms. I include left and right handed version of the mechanism. It is designed for a Mark III Mr Baddeley printed frame. I now have a mod for the COM8 frame as well. However, if someone can test, I am am…
- Downloads
- 458
- Likes
- 68
- Rating
- 5
P
PrintablesVandirac
Albatros D.III
Albatros D.III biplane fighter aircraft from World War I. Designed in Blender for use as a miniature for the BlueMax boardgame Printed on Anycubic Photon S. Licensed under CC-BY-SA-NC-ND. Print Settings Printer Brand: Anycubic Printer:…
- Downloads
- 457
- Likes
- 22
- Rating
- 0
P
PrintablesNorbert Oríšek
Dacia Sandero III center console organizer
Dacia Sandero III center console organizer printed from PLA, PETG, ABS, but better is from TPU95A.
- Downloads
- 457
- Likes
- 46
- Rating
- 3.67
P
PrintablesJerryie
Cruiser Mk VIII Challenger tank 1/72
-Two colors -organic support -0.15 layer height
- Downloads
- 448
- Likes
- 106
- Rating
- 4.5
P
Printablespartiallyfrozen
Ricoh GR III Grip
Print at 0.20 No supports needed. BOM: Mounting screw I used.…
- Downloads
- 418
- Likes
- 31
- Rating
- 5
P
PrintablesGrimGreeble
Tabletop plant: "Blob Crowd Plant III" (Alien Vegetation 22)
The Blob Crowd Plant family just got a little bigger, again. This additional model it based on my original design. I did some painting tests with this one and figured I might just as well upload it here. This smaller one can be placed…
- Downloads
- 415
- Likes
- 112
- Rating
- 5
P
PrintablesKahnindustries
Cobra MKIII 2 Part (Elite Dangerous)
Cobra MKIII model from Elite: Dangerous Model is split into two parts at the widest point and down the centre to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for commercial…
- Downloads
- 398
- Likes
- 54
- Rating
- 5
P
PrintablesSimply_prints
Mitsubishi evo VIII
this is a detailed model of Mitsubishi Evo VIII
- Downloads
- 398
- Likes
- 27
- Rating
- 0
P
PrintablesDrSchiduwi
Call of Duty Modern Warfare III (2023) LED-Lamp
Read the Instructions file for more infos.
- Downloads
- 398
- Likes
- 118
- Rating
- 5
P
PrintablesJerryie
StuG III Assault Gun Model 1:72
StuG III Assault Gun Model Scale: 1:72 The StuG III (Sturmgeschütz III) was the most-produced German armored fighting vehicle of World War II. Originally designed as an infantry support assault gun, it later proved highly effective as a…
- Downloads
- 386
- Likes
- 123
- Rating
- 5
P
PrintablesGeneralRose
Constitution III Class - Common Starship Model Scales
Originally Built by FrostyBird @ Thingiverse https://www.thingiverse.com/thing:5879291 Repaired in Microsoft 3D Builder Scaled to Standard Starship Model Scale 1:2500, 1:1400, 1:1000 and 1:350 According to production designer Dave Blass,…
- Downloads
- 373
- Likes
- 41
- Rating
- 0
P
PrintablesDaniel Kasprowicz
Christmas ornament - forest theme III
Christmas tree decoration with a forest theme. You will achieve the best result when printing from WOOD filament. More Christmas ornament Christmas ornament - forest theme I Christmas ornament - forest theme II Christmas ornament - forest…
- Downloads
- 364
- Likes
- 71
- Rating
- 5
P
PrintablesHirafazel
Fokker E.III
Německý jednomístný stíhací letoun z období první světové války.
- Downloads
- 364
- Likes
- 48
- Rating
- 5
P
PrintablesTeo_211
C-17 Globemaster III Wall Art
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
- Downloads
- 359
- Likes
- 90
- Rating
- 5
P
PrintablesNewell Acoustic Engineering
Prusa i3 MKIIIs filament guide
Designed to stop filament skipping off the side of full reels or getting tangled on poorly wound spools Can be fixed by cable ties, screws, or glue. Print instructions Files for PLA and PETG included
- Downloads
- 356
- Likes
- 20
- Rating
- 4.5
P
PrintablesAdam Cook
Nintendo Switch Docking Case MKIII
Here it is, the 3D printed Nintendo Switch Docking Case MKIII. In this update I cut the base into separate pieces so the whole case can be printed on smaller format printers. All parts are printable on Prusa i3 and ender3 sized printers.…
- Downloads
- 351
- Likes
- 197
- Rating
- 0
P
PrintablesJasonCharlton
Baddeley MKIII Drive Axle Mod
Regardless of what material you use to print your R2D2, the axle that runs through the drive wheel on the MKIII drives should be replaced with a steel rod for maximum strength and durability. Although threaded rods could be used in this…
- Downloads
- 350
- Likes
- 15
- Rating
- 0
P
PrintablesZanthrax
Hinged body mount for Axial SCX10III Early Bronco
Makes swapping batteries a lot simpler by keeping the body connected to the chassis. Uses the stock mounting points. Replaces the rear bumper mount and the mounting bracket connected to the roll cage on the body. 2 additional M3 holes are…
- Downloads
- 346
- Likes
- 30
- Rating
- 5
P
PrintablesLockeDerBoss
Windshield Washer Cap for Renault Clio III / Wischwasserdeckel
Since my cap for my windshield washing system was distorted and didn't fit anymore, I designed this model. It should suit all Clio III models, but I'm not sure. I'm driving a Clio 3 GT, 2009, sold on the german market. Material:…
- Downloads
- 346
- Likes
- 38
- Rating
- 5
P
PrintablesAusRetro
Twilight Imperium 4 Insert (+ Prophecy of Kings and Codex I, II, III)
This is Hrein's model for TI4 and the Prophecy of Kings expansion with some modification by me. The description is copied directly from Thingiverse with my changed in bold. The excess space left in the models by Hrein allowed me to modify…
- Downloads
- 344
- Likes
- 37
- Rating
- 5
P
PrintablesMisael
Renault Megane III phone holder Redmi Note 9s / 10s Iphone 13
Simple phoneholder for our Renault Megane III 2013. It hooks safely into the vents and the hazard switch and unlock button are accessible. The holder gives a tight grip on the phone with the original silicone cover (that comes with the…
- Downloads
- 339
- Likes
- 30
- Rating
- 4.5
P
Printablesalien hitman
guitar pick copy Jazz III (Jazz 3)
guitar pick copy Jazz III (Jazz 3) Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.16 Infill: 100% Filament: НИТ PET-G Black Notes: Speed 50mm/s Category: Music
- Downloads
- 337
- Likes
- 9
- Rating
- 5
P
PrintablesReedTiger
Arctic Liquid Freezer III AIO Radiator Tubes Comb
Arctic Liquid Freezer III AIO Radiator Tubes Comb 13mm spacing
- Downloads
- 334
- Likes
- 32
- Rating
- 5
P
Printablesaref rahmani
spinning maxwell cat oiiaiioiiiai
spinning maxwell cat requirements: a single 6803 bearing(better to be 2rs) housings are as tight as possible,so it may need a bit of pressure i'll be thankful if you share your print pictures and advices to improve : )
- Downloads
- 331
- Likes
- 35
- Rating
- 0
P
Printablesfrederikf
Handbrake button fix - Skoda Octavia Mk III (2013-2020)
TLDR; Fixes your handbrake button on Skoda Octavia (and maybe other VAG cars) if it popped off, and won't stay back on. (Updated 2024-07-04. User gon on the below forum informed me that the tip was 1.5mm too long. I've removed 1.2mm, and…
- Downloads
- 329
- Likes
- 9
- Rating
- 5
P
Printablesmatmx
Volvo V70 III Fuel Tank Cap Cable
On my Volvo V70 III (Diesel) from 2009 the retention plastic cable of the fuel tank cap broke. While searching for a replacement I stumbled across the model from Adam2k . I went straigth ahead and printed it … sadly the V70 has a…
- Downloads
- 321
- Likes
- 68
- Rating
- 5
P
PrintablesArgiCZ
Sharkie III - the shark knife
A knife in the shape of a shark. You can use it for unboxing or like a decoration. Here is the whole Sharkie family. :-) Enjoy and happy printing!
- Downloads
- 318
- Likes
- 108
- Rating
- 5
P
PrintablesReProps
Artemia Mk III Purgation Flamer(Darktide)
Modeled this up for fun. takes a few pieces of 1/2 in and 1/4 in dowel. will probably need gluing and sanding. Measures a total of 24inches long and is split up, also has a removable mag and ammo. Category: Props
- Downloads
- 313
- Likes
- 70
- Rating
- 5
P
Printablesnightfox90
Colt 1903 Pocket Hammerless (Type I, II, and III)
This is my Colt 1903 model. It is a solid (no moving parts) 1:1 scale model. You can of course scale it to whatever size you like in your slicer. You could scale it down for GI Joe if you wanted or make it full-scale for a costume or…
- Downloads
- 308
- Likes
- 25
- Rating
- 0
P
PrintablesDragon Mountain Design
TMNT Action Figures Vol. III - The Shredder
The Shredder action figure with articulated hip/shoulder/neck/elbow/knee joints (Uploading a few of my designs from between 2020 and 2023). More information and assembly instructions on my website:…
- Downloads
- 304
- Likes
- 82
- Rating
- 5
P
PrintablesJohannes G
Sony Xperia 1 III case
Prints without any support material. I supplied the STEP file for the case for very easy modification in any CAD software. It fits very well on the phone, even better than “real” phone cases that I've tried. If you need any modification,…
- Downloads
- 302
- Likes
- 12
- Rating
- 0
P
PrintablesJamie G
Tyre Truer MKIII for slot cars 1/32
It all started with the idea to push the limits of the 3D printing to create a precision tool that I could have made out of metal instead. The first version was without real bearings so after a while the main bearing started to get…
- Downloads
- 287
- Likes
- 37
- Rating
- 0
P
Printablescichavec
Kratos - God of War III
Kratos statue with separated printable parts, because the original link doesn't have them. This is NOT my model. I just made it into two separate pieces.
- Downloads
- 286
- Likes
- 36
- Rating
- 0
P
PrintablesJasonCharlton
Baddeley MKIII Center Vent Frame Attachment Mod
The Baddeley MKIII CentreVentPanel is intended to be held in place via a small round “plug” (VentFrameLowerHold.stl) that drops down through a hole in the bottom of the frame into a divot in the body, and a thin, horizontal piece across…
- Downloads
- 282
- Likes
- 19
- Rating
- 5
P
PrintablesBilliam
Jazz III Guitar Pick Holder
The retaining pins expect a spring with a (roughly) 8mm inside diameter. I used a 27/32" X 3/8" 0.32 compression spring, and cut it maybe 5/8" shorter. You don't want a ton of pressure, especially when full. Comfortably fits about five…
- Downloads
- 282
- Likes
- 38
- Rating
- 0
P
PrintablesKalle Luotola
Godox V860III macro diffuser
I needed simple and lightweight diffuser for macro photography. I was unable to find suitable diffuser for my Godox v860III flash so i created my own. I have 2 macro lenses: Laowa 100mm and Canon 100mm and this diffuser works well with…
- Downloads
- 282
- Likes
- 19
- Rating
- 5
P
PrintablesTinyRoy
4iiii PRECISION Powermeter Battery Cover
My 4iiii Precision Powermeter battery cover cracked, so I designed and printed my own. I used a layer height of 0.08mm for the cover and the O-ring. I printed the cover in PETG and the O-ring in TPU.
- Downloads
- 282
- Likes
- 13
- Rating
- 5
P
PrintablesSkippyMcSlappyPants
Ruger 22/45 MKII / MKIII Stock and Extended Magazine Base Plates
I already had extended mag base plates for my Ruger 22/45 MKII and MKIII, but since I duplicated the mag base plates for the 22/45 MKIV , I figured I might as well do it for the MKII and MKIII as well. I highly recommend you print them in…
- Downloads
- 278
- Likes
- 23
- Rating
- 5
P
Printablesjheezy
MKIII Hinged Electronics Panel Remix
Eebel's hinged electronics board is awesome, but I wanted to mount more common electronics than what he used in the current version. The board holds the following components - Microsoft Xbox Receiver, Sabertooth 2x32 Motor Driver, SyRen…
- Downloads
- 275
- Likes
- 28
- Rating
- 0
P
PrintablesJasonCharlton
Battery Tray for Baddeley MKIII Astromech
This is a battery holder that can be added to a Baddeley MKIII Astromech droid. It mounts via a modified AnkleSupportBar2 which is the longer support piece for the large AnkleSupport that sits at the bottom of the body. This holder is…
- Downloads
- 274
- Likes
- 23
- Rating
- 0
P
PrintablesCabott
Lombardi Trophy Kansas City Chiefs Superbowl LVIII 2024
The Vince Lombardi Trophy with (non-official sized) NFL-logo and Kansas City Chiefs logo with Superbowl LVIII 2024 watermark. Ball printed seperately and then glued together. Print the stand with support for the logos. Remix of various…
- Downloads
- 273
- Likes
- 33
- Rating
- 5
P
Printablesjtf323
Ricoh GR III / IIIx Lens Cap
A simple lens cap for the Ricoh GR III / IIIx. I mainly created it to help keep any dust and debris away from the lens when I toss it in my pocket or bag. I printed it in Hatchbox TPU at 15% infill and it fits great.
- Downloads
- 265
- Likes
- 38
- Rating
- 5
P
PrintablesCDavid
Ruger Mark 22/45 MK III, IV TLR Tactical Light and Mantis X picatinny rail
Ruger Mark 22/45 MK III, IV 22lr Bull Barrel, picatinny adapter, for Mantis X or Tactical light. TRL-1, TRL-7,… Designed to fit the Ruger Target pistol with the 22mm diameter bull barrel. Rounded front, to make sliding on of Mantis X…
- Downloads
- 263
- Likes
- 18
- Rating
- 0
P
PrintablesPopandsicle
Christmas Tree Ornament Set Pt III: Icicle Baubles (Vase Mode Prints)
For my third batch of spiral vase Christmas ornaments, I thought I'd change things up a bit with some icicle baubles. Although these have a different formfactor, they're just as quick and easy to print as my bauble designs from years…
- Downloads
- 262
- Likes
- 81
- Rating
- 0
P
Printableschrisb
Knurled 12V Socket Cover - designed for Skoda Octavia III and universal use
Gerändelte 12V Zigarettenanzünder Abdeckung Designed für Skoda Octavia - natürlich auch universell einsetzbar. Mir gefiel am Ende die Version mit mittelfeinen Rändeln (Version “mid”). Tip: Einen guten Alu-Drehteil look erzielt man mit…
- Downloads
- 258
- Likes
- 38
- Rating
- 5
P
PrintablesEL CANAL DE JOSÉ ANTONIO
RASCADOR HIELO OCTAVIA III / SKODA OCTAVIA III ICE SCRAPER
He diseñado este rascador de hielos para mi Skoda Octavia III con el logotipo incluido,que se guarda facilmente en la tapa del deposito de combustible Supongo que puede servir para todos los modelos del grupo VAG Aunque lo he realizado en…
- Downloads
- 257
- Likes
- 37
- Rating
- 5
P
PrintablesQfrcy
BoomRacing BRX02 Series II & III Radiator
EDIT 12/12/23: I added a 36mm version with other writing on the front. EDIT: I added a 37mm version for Spektrum 2 in 1. I made this model to hide the motor of your BoomRacing BRX02 Series III that is visible thru the grille. This…
- Downloads
- 254
- Likes
- 20
- Rating
- 0
P
PrintablesGrain
Renault Megane Mk III Vent horizontal lever
The “lever” that moves the horizontal part of the vent on a Renault Megane Mk 3. I didn't add the shelf that holds the little metal tensioner part since I lost mine and the feature looked too small to print, anyway it works just not as…
- Downloads
- 254
- Likes
- 33
- Rating
- 5
P
PrintablesJimjo
SCX10 III - High Clearance Bumper
High Clearance front bumper compatible with the Axial SCX10 III Basecamp. Please note the bumper is NOT compatible with the JLU body or other bodys that use the “clipless” mounting system. Provides much improved approach angle vs the…
- Downloads
- 253
- Likes
- 24
- Rating
- 0
P
PrintablesPrintedByMark
Guardian Scout III from Breath of the Wild
A major trial of strength, or a source of neat ancient weapons. Either way, these mini guardians are nothing to joke about.
- Downloads
- 251
- Likes
- 31
- Rating
- 5
P
PrintablesDxmisfn
Panzer III
Panzer III with side skirts, 1/100 scale. Use v2 (has better reinforced side skirts)
- Downloads
- 246
- Likes
- 20
- Rating
- 5
P
PrintablesCobalt3D
Detailed C-17 Globemaster III Magnet
Magnet based on the C-17 Globemaster III. Detailed model. Uses 6mm x 3mm magnets. G-Code has a layer pause at 3.8mm to drop in magnets
- Downloads
- 237
- Likes
- 36
- Rating
- 5
P
Printableskdsjr
Anker PowerPort Atom III USB C hub holder
Based on design for other anker USB hub. I attach this using command strips but added a version with holes for M3 countersunk screws as well. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .20…
- Downloads
- 236
- Likes
- 31
- Rating
- 4.89
P
PrintablesMakerLab
Communicator - Star Trek III - Printable 3d model - STL files
Hi! We glad to introduce 3d model - STL files - to print your own Communicator from Star Trek III. Model include: - 16 stl files to 3d printing (biggest part demensions: 98*60*16mm). - 1 stl files - stand for Star Trek III Communicator. -…
- Downloads
- 235
- Likes
- 48
- Rating
- 0
P
Printablesforstyl
JAZZ III GUITAR PICK (v.2)
Please don't forget to give like to this model if you truly like it, thanks! Hello fellow guitar players! Like many guitarists, I love playing with a Jazz III pick — but I got tired of constantly buying new ones. So I decided to design my…
- Downloads
- 233
- Likes
- 9
- Rating
- 5
P
Printablespv3d
Connor Kenway from Assassin's Creed III – 3D Printable Model
This is a 3D printable model of Connor Kenway, the main character from Assassin's Creed 3. The model is designed as a f
- Downloads
- 231
- Likes
- 18
- Rating
- 0
P
PrintablesDryfiredude
Twist on Ruger Mkiii MkiV bolt handles
I loved the twist on design of Bluewar's handle, but I didn't like how it came out on the underside because of the needed supports. While remixing that to become support free, I also did a short and long ring version.
- Downloads
- 231
- Likes
- 23
- Rating
- 0
P
PrintablesXermic
![Heroes of Might and Magic III Board Game - Organizer V1 [ENG/PL]](https://media.printables.com/media/prints/854011/images/6567947_68a9cc2f-57d4-4167-9b5e-51984d067e4f_dae965ce-9c9c-4c18-ac16-e80a8122d668/organizer_1.jpg)
Heroes of Might and Magic III Board Game - Organizer V1 [ENG/PL]
Hewo, I want to share my idea to organize items from the Heroes of Might and Magic III Board Game. There is no place for storing things from all DLC's in one place, so I made one myself. I made boxes for cards, tokens and cubes. Box for…
- Downloads
- 231
- Likes
- 15
- Rating
- 0
P
PrintablesPaolo
Multimeter FLUKE 87 III - probe tweezer
Thanks to QED_Maestro for his brilliant idea Print as oriented Supports: no Infil 25% Filament: PLA If you download/enjoyed this file, please leave a like Thanks
- Downloads
- 230
- Likes
- 29
- Rating
- 3
P
PrintablesInverseReverse
NERF Rival XXIII-100 Pilot Full/Half Dart Rifled Shell
A rifled barrel/shell for the Nerf Rival XXIII-100 Pilot that lets it shoot full and half length darts (and maybe Nerf Hyper balls) Easily removable and prints with no supports. It doesn't matter what material you print it in, but I'd…
- Downloads
- 227
- Likes
- 32
- Rating
- 4
P
Printablessamalex
Honeycomb flash grid Godox V860 III Öffnungswinkel 10°, 20° und 30°
Honeycomb Flash Grid for Godox V860 III Öffnungswinkel 10°, 20° und 30° The material is PETG | PLA, but you can also choose a different one. Printed with a 0.6mm nozzle and 0.4mm layer height
- Downloads
- 226
- Likes
- 14
- Rating
- 0
P
PrintablesEebel
MarkIII Compatible NeoDrive
Replacement drive for the Mr. Baddeley Mark III Drive. Uses RevRobotics NEO motors and the Max Planetary 20:1 gearbox with SparkMax brushless motor controllers. See README for the parts list. Uses powerful NEO motors paired with the 20:1…
- Downloads
- 225
- Likes
- 37
- Rating
- 0
P
PrintablesBlenkhorn
MARVEL DOUBLE BIT: IRON MAN (MARK III)
Iron Man - Iron Man (2008) Fill out my Fan Request Form here to request new character models! https://forms.gle/ALgmpRz56WqowtMe8 https://www.instagram.com/blenkhorn3d
- Downloads
- 224
- Likes
- 44
- Rating
- 5
P
Printablesantlers
Ricoh DB-110 (GRIII & GRIIIx) / Olympus LI-90b Battery Case
A little case that holds a few Ricoh GRIII / GRIIIx batteries (Ricoh DB-110 or Olympus LI-90b) The goal is just to hold batteries securely to protect the contacts and keep them from moving around awkwardly in a pocket or bag. I've tested…
- Downloads
- 216
- Likes
- 22
- Rating
- 3
P
PrintablesJason ate Paint
Litter Robot III Open Air Fence
After upgrading from the Litter Robot 2 to the Open Air, I loved almost all aspects of the upgrade except for the "Open Air" part.... Open Air translates into "Litter thrown everywhere" . I bought the official Open Air fence but it was…
- Downloads
- 214
- Likes
- 32
- Rating
- 5
P
Printablessvierq
Honda civic VIII key
My key has failed. I decided to print a new case. But the design I found required removing the "panic" button, which I didn't have on my remote. I decided to make a few modifications to this cool project.
- Downloads
- 214
- Likes
- 13
- Rating
- 0
P
PrintablesEebel
Mr. Baddeley Mark III Electronics Mainboard Mod Version2
My main electronics board for Mr. Baddeley's Mark III astromech (R2-D2 and the like). This board is designed to use all the standard parts plus Adafruits 16-Channel PWM servo driver boards. It has mounts for the following: Arduino Mega…
- Downloads
- 212
- Likes
- 66
- Rating
- 0
P
PrintablesNiko_Ju
Godox V860III Flash Grid Attachment
I have created a modifiable addon for the Godox V860iii flash. About the model The STL consists of the slide-on section and a solid block, which can be modified directly in Prusa Slicer. on the sides, there is room to insert some short M4…
- Downloads
- 211
- Likes
- 39
- Rating
- 5
P
Printablesjen.f16
Super Bowl LVIII Kansas City Chiefs Champions vs San Francisco 49ers Coasters/Beer Mats
New additional Kansas City Chiefs Champions coaster Beer mats/Coasters for the 58th Super Bowl with the San Francisco 49ers playing the Kansas City Chiefs. Each coaster has the badge of each of the teams with the Super Bowl LVIII logo…
- Downloads
- 208
- Likes
- 24
- Rating
- 5
P
PrintablesSam_PNW
Coffee Bean Funnel For Comandante C40 MKIII Grinder
I've been grinding a lovely single origin yirgacheffe lately, but as the beans are small I've had a few of them get stuck down in the gap around where the grinder handle fits onto the burr drive axle. I've also had the occasional bounce…
- Downloads
- 207
- Likes
- 21
- Rating
- 5