Counting matching models…
Railcar bogie, model 18-100. Used for most soviet/russian railcars from 1960s till now. Print instructions Three variants of crossbar included: without mounting hole, with one, and full variant with hole and sliders. Real bogie always…
This was designed as a greetings card but also suitable as a decoration or fridge magnet. The photo shows it printed using a generic white PLA bought from the Prusa shop.
A plaque for the Orbital Railcannon Strike UPDATE 3/4/24: Added STL files UPDATE 3/5/2024: Added V2 files that includes some fixes for misc. symmetry and centering of objects, as well as updates to the stratagem model itself to be more…
It is heartbreaking to snap off the mast removing supports so I have sadly had to make the mainsheet very thick and fillet the base of the mast. Don't print it small if using supports. I have added an unassembled version. When I started…
This is a ILCA Dinghy Traveller Wear Protector. It protects the gelcoat from your ILCA or Laser Dinghy from being damaged when you pull your traveller really hard while hiking.
Having used the previous version for some time I decided it would be a good time to revisit its design. Taking into account feedback, my own and user experience I've added some quality of life features and updated the way the box is…
Automotorul CFPV. S-au fabricat 3 exemplare, la Astra Arad, inainte de al doilea razboi mondial, pentru o linie particulara de cale ferata din Romania. Si anume Caile Ferate Prahova Valeni (CFPV). Pentru utilizare comerciala sau va rog sa…
This model is compatible with the lego system.
This was just a short and fun project I designed and built for my Dad. While the model is more or less a Ford Model T it is not exact and not to any particular scale. This model is about 150mm long and is designed to fit a track with 36mm…
G-Scale 1:29 20 Axle Schnabel Railcar with Load Deck & Tank Load - I'm not very good at writing directions but everything should be self-explanatory on how it goes together! I used ¾" x 1 ½" white PVC water pipe to glue the two large…
The motor is Mabuchi 010. Also you need M2 screws with nuts. Un automotor pe care sa il poata tipari 3D toti pasionatii din Romania. Daca aveti planuri de la locomotive romanesti va rog sa mi le trimiteti la [email protected] pentru a…
A simple box for desicant material, i've put it in an old cigar humidor converted in filament dryier box. Printed in Pla with Cura 5.6.0. slicer. Printer Ender 3.
WWII German Armored railcar. Used to defend railroads from partisans. Intended for 1/100 scale gaming. This is my second attempt at creating a vehicle. I used it to learn Fusion360. Car is armed with six machine guns. It is self propelled…
Parts for an EBT M3 railcar. I used wheels from a Kato C12, but you could use Kato 11-607, 11-608, or 11-609 wheels. Category: Hobby
Дисплей і роз'єм живлення запаювати так як на фото v1-2 Друкувати з підтримками Файли *_printable містять додаткові підтримки Зверніть увагу на мости на нижній деталі - вони повинні бути вздовж корпусу Поредагувати можна тут upd…
An elegant pencilcase with a magnetic closing mechanism. You will need 8 magnets 2x6mm und 2 M3x16mm screws. You will need support for the hinges of the bottom.
WWII German Armored railcar. Used to defend railroads from partisans. Intended for 1/100 scale gaming. This is my first attempt at creating a vehicle. I used it to learn Fusion360. Many thanks to TigerAce1945 for allowing me to use his…
The lockclips on Bosch cases happen to break after years of use. Therefore I needed a replacement lock for the case of the Bosch SDS Drill. The lock could be used for other things too of course. Created with OnShape…
Pencilcase / Portable Desktop Organizer For pens up to 17cm
Made this holder to hold the wire handle so to does not fall into the pot of melted wax. There are multiple indents to place the handle in. I would recommend to print it in PETG. Printed on the side without support.
I wanted magnets built into the tailcap of my BLF LT1 so I can stick it to surfaces, and I didn't want to have to carry around one of those tripod-thread magnets. This adapter holds six of these magnets inside the tailcap, and they're…
Dieseltriebwagen or diesel multiple unit for wooden railways compatible to BRIO, IKEA, etc. Required parts (per wagon): 3x M2x16mm (total 6x) 1x M2x10mm (total 2x) 1x Ø 6mm x 3mm magnet (total 2x) Building instructions Assemble 4 wheels…
Use this model as a fun project for kids or as part of a STEM activity. Have students design their own sails and try different mast positions to experiment with performance and stability. Check the second photo for parts. Axles are 2mm…
The load is designed to nicely fit a open car with a 15x48mm loading surface. 3D PRINTING SETTINGS Layer height: 0.2mm Infill: 10% *07-02-2024: I reoriented the stl file in order to make sure it is imported with the right orrientation.
The same box as the original but with a divider in the middle.
Protector for your ILCA/Laser traveller. This goes around the corners of your traveller hardware so it protects both the pulley and the GelCoat of the boat. Print it in an UV resistant filament so it does not breaks in the first 5 minutes…
It is a very simple model specially created for an easy and practical way to print, so you can try do it in the way it best suit's you
Designed to use a Tomytec TM TR02 chassis or something similar. Category: Hobby
Holder for 2 Oilbottles for HBM 25 x 550 Lathe.
For those days at the range, in the safe, etc… Keep the tailcap and wire secure while the flashlight isn't being used. There are two models. One attaches via M Lok by itself. The other attaches to M Lok along with the flashlight mount.…
This is an updated Saddle for @Extrutim Cheap Filament Storage Box, and @PhilCaruso AutoRewinder I think it looks nicer and is more stable, and fits the base better. It's an triangle tower style saddle for the Auto-Rewinder that fits…
HOn30 railbus designed to use a Tomytec TM TR02 chassis or similar. Few different versions. Category: Hobby
Very short length minimalist rail-car rerailer that fits code 83 rail or larger. Designed to be portable/moveable but could be glued or rubber cemented into place if desired. Tested with Atlas code 83 track and was able to consistently…
Protective tailcap for Acebeam X75 flashlight. This allows the flashlight tailstand as well as putting it down and keeping the handle upright. Use TPU or similar soft filament, I printed mine in TPE85.
Here are some replacement Plarail Mailcar doors for those who need them. A quick one day modeling project that will definitely pay off. With pins and all for those older style ones with the cargo pieces inside!! It is heavily advised to…
I like the laser and like designing prints because I like both of those so I made this Laser with lots of detail.
Ultrakill railcannon NOT MINE FROM ULTRAKILL
Update 24 Feb 2019: I've switched over to Fusion 360 for my modeling, so have been going back through my earlier SketchUp designs and remodeling them. I've included the new design as well as the F3D original. Broke the handle on my…
Spout for 5l Oil Can (Olive Oil from Creta).
you might need to change the size depending on the diameter of your shaft and wheel
I printed in white ASA because that is what I had on the printer. Works fine. I suspect black in PA or a variant would look more “traditional” and be more durable. It works with the O-Rings (they are #9 if you need to buy them from the…
I recently got a bike that has a Silca Sicuro V2 Titanium Bottle Cage . My previous bike had a Specialized Zee Cage II With Tool , and the tool was really good! (In theory, you can get this tool and its mount separately as a EMT Cage…
This little thig is a fictional 0-4-4t Built from an old vertical boiler and coach to be used on the Bryn Bach Light Railway as an inspector's saloon in 1920. He was given the nickname Jim Bob after somebody chalked the name onto his coal…
Kato 11-109 version of Jim Bob
This set contains 9 different swatches to capture all the most common FDM materials and more and showcase all the possible variations a printer is capable of: from polymer choice to internal geometry, temperature and printing speed.…
This is an adapter so you can put an ordinary vane in the bow of your ILCA dinghy (LASER). It is required that you print this model with at least TPU or a similiar flexibility filament, if not you may not be able to fit neither the Vane…
Absolutely! Here's a polished, ready-to-post description for Printables that explains how you use the AnyCubic AirPure silica basket for filament storage — and why it’s a clever setup. Title: AnyCubic AirPure Silica Basket – Filament Dry…
I've created a neodymium magnet holder that fits in Zebralight's Tailcap, if tilcap measures 24.20mm in diameter this will work fine! I did 2 versions, 1 to use with flex materials (the tailcap hole is narrower) 1 to use PLA etc, a little…
Use 10% infill. If you like this model please leave a review. Please make suggestions on how I can make it better. Thank You
Having a magnetic tailcap on your flashlight can be very useful which is why I designed this cap to fit on my ThruNite TH30 or any other light with a 24mm diameter. The cap fits 4 10x3mm round magnets and is very strong. The fit on my…
Just a simple pencilcase for your pens, highlighters and crayons. I would reccomend the big version as it can fit pencils up to +/- 20cm, as the rest of the versions are made for some smaller things like the small version is made for…
Made a replacement lid for leaking chinese oilcan. Now iit is a spillproof oilcan which is used with a acidbrush on the lathe.
Although it may look overhang like, this organic looking pencil holder actually doesnt need supports thanks to its unique egg shaped design.
Print outer perimeter first! Use colour change for the eyes.
UPD2: V2 version for more even tailcap lighting added UPD: thing was tested and works pretty nice. Also added version without holes in case you decide to print with transparent filament. My transparent washer is broken so i designed my…
Simple base, insert the pump and lock with two cable zip ties. It stabilizes a lot these type of pump, printed with brim Print Settings Supports: No Infill: 30 **Filament:** Sunlu PLA Category: Sport & Outdoors
From the LEGO 42129 4x4 Mercedes-Benz Zetros Trial Truck set, timtimgo created an alternative build, which is a fantastic MOC (downloadable here: https://rebrickable.com/mocs/MOC-88360 ). It’s a great design, but its weakness lies in the…
Bezel shield is serrated to allow heat to escape and to visually indicate when lamp is accidentally on. Bezel shield has anti roll pin to prevent lamp from rolling away. These are press fit with no glue. Printed with ASA CF, no supports…
Railcar Puzzle Electric Car Playset Crossover Piece Category: Puzzles
A simple box for desicant material. You can screw it onto the container. To remove the box, no screws are needed; it is plugged into the holder over a T-connection. 6 M3 threaded inserts are required. It is suitable for Silca gel from 3mm.
Holder to a oil can(Air guard tryckluftsolja 50ml) on MAX PAWERLITE AKHL 1260E/EX Print Settings Printer Brand: Anycubic Printer: Photon Rafts: No Supports: No Infill: 100 Filament: PolyMaker resin gray Notes: Easy to print. Post-Printing…
This scale model captures the sleek design of a high-speed EMU power car, featuring a long pointed aerodynamic nose and skirts that hug the rail. Inspired by real-world express trains running at 300 km/h, it includes a single cab and a…
This is a easy printable and minimaşist pencilcase. Best for new school season or wotk season. Print with pla,abs or petg.
A streamlined 2000s maglev passenger car featuring a smooth body, continuous window band, and separate door parts. Inspired by real-world Hoverline designs, this model captures the sleek, slim profile of modern rail transit. Supports are…
Having used the previous version for some time I decided it would be a good time to revisit its design. Taking into account feedback, my own and user experience I've added some quality of life features and updated the way the box is…
A simple box for desicant material. You can screw it onto the container. To remove the box, no screws are needed; it is plugged into the holder over a T-connection. 6 M3 threaded inserts are required. It is suitable for Silca gel from 3mm.
The end caps that came with my Silca Hirobel were a pretty rough print, so I modeled them and printed a nicer version to prevent snagging my jerseys if I hang them to dry on the work stand.
View, Copy or download the model via On Shape: https://cad.onshape.com/documents/7c7d53dbff9ed001af61047f/w/dfa6cd2b7226a40bb5e7f431/e/b808a0daea3dc8132f95b422?renderMode=0&uiState=67e6897d5b14b00ad8411f7f I included two images of the…
Cover for the magnetic tail cap on the Olight S30R III. Print Settings Printer: Fabrikator 2 mini Supports: No Infill: 100% Category: Hand Tools
Stock washers (bushings) tend to crack but printed with translucent PETG is more sturdy. Tested before on Convoy S2+
