146 models
Time is changing and a lot of opportunities are being created every day i think 3d printing is one step two the right direction. let's make the world a better place, a place where everyone has a chance to be successfull !! Print…
Print approx. €3.73–€4.56 excl. taxPreliminary estimate for one variant
Made to work with the Honeycomb Storage Wall system. Requires a single open hollow insert. Does not require supports.
Print approx. €1.95–€2.38 excl. taxPreliminary estimate for one variant
yt keychain
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Print approx. €1.95–€2.38 excl. taxPreliminary estimate for one variant
Prusament PETG; Druckdüse 0,4mm; Schichtdicke 0,15mm “Quality” Druck auf kleinerer schräger Fläche, so dass alle Winkel größer oder gleich 45° sind → keine Stützstruktur nötig.
Print approx. €2.28–€2.78 excl. taxPreliminary estimate for PETGSource material: PET
All in one: Vier Varianten meiner Industrieschlüssel - immer griffbereit Vierkant: Durchmesser ca. 6mm; Kantenlänge: 8mm Dreikant: Durchmesser ca. 6mm; Kantenlänge: 8mm Schaltschrank (ohne Mittenloch): Durchmesser ca. 8mm; Seitenkanten…
This Fully Enclosed Open Source Cartridge Reader Shell (FEOS) is designed to be durable, well protected, and look stunning on your desk. The shell is a multi piece assembly, the shell base, the cover, battery and the faceplate. The “decoy…
I wanted the cool blue Lumon Industries key card from the show Severance, however nobody had a model of it, so I created this quick design in fusion from a picture of the key card they used, scaled to the size of an RFID card to get the…
Prints with minimal supports. Front panel is press-fit. No tools needed for assembly. For best finish use textured plate.
Fallout Vault-tec Industries light box based on my favourite game franchise. You can chose from two back plates with the hole for the hanging on the wall or without the hole. Stand is also included. I used cob LED trip with USB, 8mm wide.…
This is my interpretation in Gauge 1 of the NS Zuurpottenwagen 520704 - N.V. Koninklijke Nederlandsche Zoutindustrie Boekelo. Before suitable corrosion resistant metal alloys were available to build tank cars, acids and…
Model includes the grip itself and .3mf file With modifiers for adding fuzzy skin for grip already contained on the model. Highly ergonomic grip designed for easy 3D printing, uses the same grip angle as the Magpul MOE K2 grip along with…
Lumon Industries keycard from Severance on AppleTV. Print in blue for MDR, black for security clearance.
I got a set of Bob Smith Industries CA glue and needed to store it in an accessable place. I created a 1x4 Gridfinity bin that perfectly holds the 1 Oz bottles of glue and 2 Oz activator. Here is a link to the set I purchased:…
Vierkantschlüssel für Anlagen - immer griffbereit Durchmesser ca. 6mm; Kantenlänge: 8mm Am besten in PETG oder ABS drucken oder gleich mit CF-Verstärkung.
Dreikantschlüssel für Anlagen - immer griffbereit Durchmesser ca. 6mm; Kantenlänge: 8mm Am besten in PETG oder ABS drucken oder gleich mit CF-Verstärkung.
Industriel Platform Multipart for 28mm and 32mm scale tabletopgaming
Simple and easy, the screw-less flared magwell gives you a much easier time reloading, while being very low profile and still removable. Print in PLA+ or stronger (Just make sure the material has some flex if you ever want to remove it)…
Tony Stark's famous company in Marvel's universe. https://en.wikipedia.org/wiki/Stark_Industries
I used the Gridfinity Generator Fusion360 Add-In (linked below) to create this model. https://apps.autodesk.com/FUSION/en/Detail/Index?id=7197558650811789&appLang=en&os=Mac
As always I will promote and REWARD the first people to post quality makes (must enable tips on your profile for reward). A quality make is a successful, complete, hopefully decent looking print at 100% scale. doesn't need to show it with…
“And all in Lumon’s care shall revel in the bounty of the incentives spur.”
Schaltschrankschlüssel für Anlagen - immer griffbereit Durchmesser ca. 9mm; Mittenlochdurchmesser ca. 5mm; Seitenkanten jeweils ca. 2,5mm Am besten in PETG oder ABS drucken oder gleich mit CF-Verstärkung.
Ergonomic grips for your Airsoft GBBRs for use with Airsoft GBBRs or GBBRs with RS spec selector springs in them. 125 = 12.5 degree Grip angle (Steeper) 165 - 16.5 degree grip angle (more angled) Pick whichever one is most comfortable for…
Clé pour ouverture armoire electrique industriel
1 x 1 gridfinity block, holds Bob Smith Industries 2 oz Super Glue
"United in Severance"
A lighter or heat may be needed to smooth some edges
I wanted a holder for my two bottles. I have a 2oz. bottle of the Insta-Cure+, and a 2oz. bottle for the Insta-Set. They are a good combination for bonding PLA parts. Because I have a crowded desk, they get moved around all the time. I…
This is a flywheel cage and wheel set for the FDL-GONK, designed to use the new 2207 “Plus” brushless motors from Kelly Industries. The wheels themselves are designed strictly to be printed in sls, as the design is closer to zero…
I got a new balisong trainer and it did not come with a bite handle marker, therefore I designed one myself. It is meant to distinguish between the handle that comes in contact with the blade from the handle that comes into contact with…
Praise Kier! Now you can decorate your home or office with a nice Lumon Industries Logo. It is almost as fun as a music dance experience! I hope you enjoy!
I had a modified Dremel CNC and it had some issues so I ended up making a new one from scratch. It's not perfect but it's pretty rigid even if 3D printed. There is a Fusion 360 file because I used what I already had and you should be able…
Israeli Military Industries logo
llavero con hueco para meter un rfid dentro.
During installation of our air conditioning, one of the screw covers disappeared (of course…). The visible screw was really bugging me, so I decided to remodel it and try to 3D print it. The part came out quite nice! Of course, there is…
A mix between a Kenworth and Peterbilt semi truck that I have been working on and off on for around 7 months. I will be eventually posting the model for sell on other platforms but I just wanted to see the response I got. Truck will have…
The PSI finishing jaws I originally bought are too large to fit on my 8" PSI lathe, so I modeled these 6" jaws to replace them. Fitment is measured directly off the OEM finishing jaws. Additionally, the OEM rubber work holders are on M6…
This is a simple cover plate for a CW Industries 3-position slide switch. While it may work with other similar slide switches, I offer no guarantees that it will do so.
I liked my CA glue bottle holder https://www.thingiverse.com/thing:4604158 I decided to make one for my epoxy glue bottles. For me, this holds the 4.5 oz., two-part, quick-set epoxy from Bob Smith Industries, about 35.5mm diameter. (Other…
Mount for the Midwest Industries AR-15 Lower Receiver Block on Multiboard. Connects to multiboard with snap fit. All I did was take a lower receiver STL and cut it up, it's quick and dirty but works. Print using your standard settings.
I.T. DEPARTMENT - REYNHOLM INDUSTRIES, License Plate Frame Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 25 Category: Signs & Logos
Please show your appreciation to Ryujin Industries by advertising their sign on your car, fridge, toilet seat, or computer. *Failure to advertise may result in a corporate fine. No Brim No Supports .8 to .12
Schaltschrankschlüssel für Anlagen - immer griffbereit Durchmesser ca. 8mm; Seitenkanten jeweils ca. 1,2mm Am besten in PETG oder ABS drucken oder gleich mit CF-Verstärkung.
Wire spool organizer for Remington Industires Spools. Use the same end caps and spacers from the 55x20 version from Greecher's Wire spool holders.
There were other models for other variants of the Bob Smith Industries glue, but not for the one I wanted. Now it exists! Store your 1oz BSI CA glue and 2oz insta-set in a 1x2 bin
Eine Zeichenschablone für Grundlegende Symbole aus der Verfahrenstechnik für Chemikanten bzw. Industriemeister Chemie. Habe diese Schablone für mich und meine Kollegen zur Meisterprüfung erstellt, und diese hat mir persönlich gut…
This is a simple Keychain with a logo of Endfield Industries from Arknights:Endfield. The model was done with the extraced vector image from the game itself, and then modeled in blender. This project was done purely for personal use, as…
This is a mast cap for the LD6 lil dude 6 portable mast made by HamRadioDude here is the intro video to that : This mast cap is press fit into the LD6 to retain all the segments of the LD6 for storage. Is also functions as the attachment…
A slight modification/remix to allow use with lil dude 6
After purchasing the design for the shop apron on AdamSavage.com I wanted to make it easier to cut out the leather components. These are stencils for the pockets and harness pieces.
The host fittings in the model are for 5/8" ID. I was far along before I caught that fact… These are ½" fittings for 1" PVC. I will include the Undocumented SCAD files I hacked together incase you need to make a modification smaller or…
It has always bothered me that the cable of my Kärcher vacuum cleaner hung around the cleaner and I was not really able to wrap it around something without having it dropping down all the way. Also during transportation it was a mess. So…
My friend Eric "postalshark" made this nifty lid for repurposing the Pringles snack pack containers. Recently, Eric talked me in to watching a show I quit watching after two slow drawn out episodes that didn't interest me, "Severance".…
Reynholm Industries - IT Crowd Sign Introduction I like cool logos and I really like the logo of “Reynholm Industries” from “IT Crowd” so I decided to design and print my own sign, so I can hang it onto my wall and just be happy.…
simple case for use in multiple Themes have fun scale to your need
Crochet pour rack industriel mi-lourd
Da bei uns im Wohnheim ( 7 Wohngruppen - 7 Spülmaschinen ) immer wieder mal in der Eile beim Säubern der Siebe das Grobsieb mit in die Mülltonne wandert, hab ich mal das nachdesigned. Ein neues Sieb kostet 55-65 Euro. Nachgedruckt kostet…
3mf files compatible with bambu studio for multi-colour print
A Lumon Industries Lightboxes that I created. The files include versions with and without a wall hanger and a hole for a wire passthrough. Just choose which look you prefer, a blue or whited face. I hope you enjoy!
Printed and built my own Severance-inspired Bluetooth Lumon Industries speaker designed by Adafruit. Wanted a fun way to make it more authentic, so I made a cable tag! Put this on anything to yourself feel like your innie. Add a filament…
While the work is indeed mysterious and important, Lumon hopes that this plaque will provide reflection for you on the equal importance of following the Lumon way. There is also a convienent stand so that you may display this in a…
I needed my fixed industrial shelf to be moved from time to time. This unique solution is functionnal and answers my need. Print in ABS, with tree supports at 35% infill. This fits a Whalen industrial shelf but probably fit others like…
Organization station made to hold 2 x 2oz and 2 x 1oz Bob Smith Industries (BSI) CA glue bottles, 1 2oz BSI Insta-Set spray bottle, 4 long hex bits, and a pen/tool cup. I designed this since I really needed a way to keep these glue…
Show your support for Hudson Printing Industries with this stunning two-color plaque! No AMS/MMU required! For the inverse (background is taller) swap filament at layer 11 if using .02 mm layer height. I recommend using a lighter/brighter…
Make bigger or smaller if you want. I suggest making all the letters connected in a remix if you want it hung up or something. There are no supports, and it takes 2 hours for an easy and smooth print.
Our shop's logo, QR code, colors. Sorta kinda. Thanks for stopping by. We do cool stuff, and we're glad you do too. For more cool stuff, mosey over to dirtfarmerindustries.com. We'll see ya there.
A 40mm fan mounting structure for PC104 expansion card slots. Two pieces are available as print files: the structure and the securing clips, which must be printed in batches of four.
Industrietreppe - Stufenbreite 8mm (1:120 = 96cm) - Stufen höhe und tiefe 1,5mm (1:120 = 18cm) - Geländerbreite 0,6mm (1:120 = 7cm) - Fanghacken für Montage vorhanden
Description du kit Ce kit représente une halle industrielle de fond de décor , inspirée de l’ancienne conserverie de Liverdun (Moselle) . Conçu à l’échelle H0 , il est destiné à une implantation en arrière-plan de réseau. ⚠ Attention : il…
Cheminée industrielle – Échelle HO (1:87) Cette cheminée industrielle est proposée exclusivement à l’échelle HO (1:87) . Elle est issue d’un modèle original conçu à l’échelle 1:32 , dont le design a été fidèlement conservé, puis ajusté…
This is a simple Keychain with a logo of Endfield Industries from Arknights:Endfield. The model was done with the extraced vector image from the game itself, and then modeled in blender. This project was done purely for personal use, as…
Following the success of the popular Jupiter Industries Martianball shoe, the O2 Max, Jupiter Industries has used that technology to design an updated and more technologically advanced door stop for the Printables door stop contest.…
Abstergo Industries - Assassin's Creed - Key chain - Portachiavi - Porte Clès - 钥匙链 https://assassinscreed.fandom.com/wiki/Abstergo_Industries Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx…
Wet Willy and Flame Boy - World Industries Figures
A Gridfinity holder for a Bob Smith Industries Insta-Set 2oz (or any 35mm) bottle. Prevents the bottle from falling over and potentially spilling onto your bench. Has holes for either 6mmx2mm magnets or M3x6mm countersunk head screws…
![Prism Arms - K-Industries "Strike" Pistol Grip [For VFC M4/AR GBBR]](https://media.printables.com/media/prints/42f3c46a-42cc-4d5a-a297-383f5528edea/images/10361191_bdee274f-2411-454e-aa6d-c79876cb6740_4e4cba5b-2a49-41be-950f-53fbb70cb871/20250731_102105.jpg)
![Prism Arms - K-Industries Snap On Flared Magwell [For VFC and Vipertech M4/AR GBBR]](https://media.printables.com/media/prints/f3a951ce-22db-42c8-9298-20822710f549/images/10442023_e399e830-748f-4f3d-8001-6d643039444a_15f9fc5a-6c64-42da-8155-6e5445ff795c/20250812_165710.jpg)
![[HO] Halle industrielle modulaire de fond de décor](https://media.printables.com/media/prints/e68a3db1-7cd3-4cb0-bc8f-0080826e0fc6/images/11610311_e80ad71d-8a12-46d7-8d9c-ba6c91d9d996_05d64ce8-cd21-4baa-8022-b89355cd8747/img_20260103_130250.jpg)
![[H0] Kit Cheminée industrielle V2.0](https://media.printables.com/media/prints/5dcab612-6fd8-4d99-be65-19af9719a717/images/12055532_91df9bab-a674-4198-8e43-e88f3df7a743_e8149609-30d2-430d-8ce4-a7f9a623e349/pxl_20260215_115242462.jpg)
