1 / 2
6" Lathe Finishing Jaws for Penn State Industries Chucks — image 1
1 / 2

6" Lathe Finishing Jaws for Penn State Industries Chucks

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

These finishing jaws are small enough to fit on an 8" PSI lathe and fit M6 hardware.

Rating
0 / 5
Likes
7
Downloads
48
Makes
0
Views
310
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Share Alike

The PSI finishing jaws I originally bought are too large to fit on my 8" PSI lathe, so I modeled these 6" jaws to replace them. Fitment is measured directly off the OEM finishing jaws. Additionally, the OEM rubber work holders are on M6 bolts, so these jaws fit M6 threaded work holders. 

Just like the OEM jaws, this model uses an M3 bolt on the “4” jaw to ride in a track on the chuck and function as an end-stop when the jaws are fully opened or closed. 

 

This model uses one M3x6mm socket head bolt screwed through one jaw from the front face:

 

Tags