1 / 2
6" Lathe Finishing Jaws for Penn State Industries Chucks — zdjęcie 1
1 / 2

6" Lathe Finishing Jaws for Penn State Industries Chucks

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These finishing jaws are small enough to fit on an 8" PSI lathe and fit M6 hardware.

Ocena
0 / 5
Polubienia
7
Pobrania
48
Wydruki
0
Wyświetlenia
310
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

The PSI finishing jaws I originally bought are too large to fit on my 8" PSI lathe, so I modeled these 6" jaws to replace them. Fitment is measured directly off the OEM finishing jaws. Additionally, the OEM rubber work holders are on M6 bolts, so these jaws fit M6 threaded work holders. 

Just like the OEM jaws, this model uses an M3 bolt on the “4” jaw to ride in a track on the chuck and function as an end-stop when the jaws are fully opened or closed. 

 

This model uses one M3x6mm socket head bolt screwed through one jaw from the front face:

 

Tagi