315 models
Trackpoint cap for Lenovo thinkpad keyboard. There are two types, a bulging one and a dented one. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: SainSmart TPU Clear…
I designed this set of models to be replacement parts for the 1995 IBM ThinkPad 701C and 701CS laptops. The attached 3MF file is a project file created in OrcaSlicer that has everything laid out. I've also attached the STEP files as well.…
Remove all the mess at your desk by moving the dock of the surface. This model allow you to hang your dock on the back of your desk, and it is easy to move. It is recommended to print the model in PETG, and to make it strong i recommedn 4…
If you don't want your Lenovo Gen 2 USB-C dock lying around on your desk, you can use this holder to mount it on the underside. These brackets allow you to slide the dock in and out, holding it securely to the table while still being…
A desktop stand for Lenovo laptops. Works with Thinkpad E580 and E480 so far, with a holder for the USB-C Thinkpad dock. Holds the laptop at a 30° angle, with the base of the screen roughly 15cm above the desk. Has small recesses…
Small, elegant stand to use your laptop as a screen (with mouse and keyboard setup), to unclutter the desk and raise the screen to a proper level. Easy print, no supports, only 25 grams of filament. Stands stably with no flex. If you have…
This laptop stand was designed for my Lenovo Thinkpad (16"), but it will fit for many other laptops as well for sure. Just check the dimensions. The Dockingstation fits perfectly under the laptop, wich makes your desk look cleaner and…
Diseño realizado por mi, echo en fusion 360, funcional y actualmente lo uso para mi notebook ThinkPad lenovo T14. Design made by me, made in fusion 360, functional and currently I use it for my ThinkPad lenovo T14 notebook.
Probably compatible with other Thinkpads
This is the 3.0mm variant of the Lenovo Thinkpad Trackpoint cap. I printed it in TPU. It's a bit messy (being small format TPU) and probably would have printer cleaner on a 0.20mm nozzle, but the end result works GREAT on my Lenovo P1 Gen…
Under desk mount for Thinkpad usb-c and thunderbolt docks. Leaves the power button accessible and easy to locate under a desk with the convenient design. Uses either #8 or #10 screws in countersink holes for elegant mounting. Needs…
The Power Button of my wife's Lenovo Thinkpad T570 was broken and get's stuck in the case. So i decided to make a replacement. I printed the button from Nylon. To Repair the Button you have to do following steps. Remove the battery…
*Vastly updated version: https://www.printables.com/model/725578-lenovo-thinkpad-p15-and-p52-laptops-under-deskshel *Added .STEP file for editing :) This bracket set will allow a Lenovo Thinkpad P52 laptop to mount under a desk or shelf.…
It protects smart card readers from dust. It can also be used as a residue-free alternative to stickers for identifying laptops (when printed in different colors). It's completely flush when inserted. This way it cannot get caught…
Mount for Lenovo ThinkPad Hybrid USB-C with USB-A Dock. You can use is for wall or underdesk mounting. There is a cutout for the powerbutton and feet of the docking station., missing is a hole for the lock.
1:1 Model of a 24Wh battery for ThinkPad T470/80 T570/80 and T25. It locks in place securely, the mechanism on the left latch works as intended. I made it because I mostly use my laptop on a charger/docking station but didn't want a…
Enhance your video conferencing experience with the ThinkPad Stand, a precision-modelled stand compatible with the Lenovo ThinkPad T490s. This innovative stand elevates your ThinkPad, addressing the dreaded 'frog perspective' in virtual…
*Added .STEP file for editing, enjoy! Designed this to store away my work laptop when I'm done for the day to clear space so I can slide-out my personal keyboard+mouse. My configuration allows to keep the laptop connected to power, USB…
A vertical notebook stand. Specifically designed for the Lenovo ThinkPad X1 Yoga Gen 3. The gap in the stand is 2cm wide, so it should fit any other notebook with about the same thickness (no guarantee of course). The stand is designed,…
I needed some space on my desktop, so I took advantage of ThinkPad's ability to be opened "completely". Moreover, the screen is now at a more comfortable height for my neck. As this laptop is quite heavy, I didn't want it to fall upfront,…
I tend to give a home to abandoned thinkpads with missing parts. I remixed my X200 HDD cover to fit a X230 I recently got. Printed without supports, 0.1mm layer. Fits like the original after a little bit of cleanup. Print Settings Printer…
A simple stand for a Lenovo Thunderbolt 3 (gen 1 or 2) dock and a laptop.
Some endcaps for the ThinkPads 65W charger to wind up the cables with and keep them tidy. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Yes Resolution: .2 Infill: 20 Category: Organization
If you like the model, please give a like 💟 and post your prints 📸. 💡 Underware - Multiboard - Lenovo 90W Power Adapter holder (ThinkPad Universal USB-C Dock) 💡 💫 Recommendations PLA/PETG 0,2 mm layer no support
Filament: PETG Black infill: 15%
2.5" Drive HDD / SSD Laptop Drive Caddy Disk Tray Bracket for Lenovo ThinkPad. Compatible Models: For Thinkpad T470 T480 T570, For Thinkpad P50 P51 P51S, For Thinkpad P70 P71 P72, For Thinkpad E460(NOT E470)， For Thinkpad E480 E485 R480,…
I have a few monitor mounts at work I wanted to attach our Lenovo Thunderbolt 3/4 docks to in order to clear up some desk space. These fit snuggly over both ends of the dock and can be mounted to the monitor mount's pole using zip ties. I…
Print at what setting you like, no support needed. :)
Found out my refurbished thinkpad x220 only came with one hard drive caddy arm. I wanted to also take advantage of the fact that you can easily swap the hard drives on the thinkpad x220 too.
I created this laptop stand for my Lenovo ThinkPad P16v Gen 2. It should hold other laptops as well, provided they are not higher than 26 mm.
Laptop Stand for the Lenovo ThinkPad USB-C Dock Gen 1 and Gen 2 (40AS) with sizes of 17.1 x 8.0 x 3.08 cm and the front connectors on the left side. Prints in 3 pieces (on Prusa Mini and above, rotate the long connector by 45 degrees)…
After getting a thinkpad T14 as new laptop i needed a new stand. I made a similar stand from scratch in onshape based on original stand i used previously The source:…
Prop up your ThinkPad! Prop up your laptop to reduce having to stoop over it on your desk. Your posture and back will be forever grateful! The base is propped up at a 60° angle lifting the screen 24cm off your desk You can open the screen…
A replacement hard disk drive cover for X200-series Thinkpad laptops (X200 X200s X201 X201s). No raft or support needed, the horizontal notch might need a little bit of cleanup after print to properly fit. Category: Parts
For a more ergonomic grip on the integrated pen. Printed standing with brim. small supports for buttons. Pen is held by friction, if sleeve is too tight, use some heat to fit sleeve on the pen.…
This is a case you can keep on your Lenovo charger to make the cord wrapping and transporting of the charger much neater. The notch in the middle allows the cords to be nicely held together using Lenovo's included velcro strap. This…
I designed this because I wanted extra desk space. You can mount the laptop either closed or open, if you wanted to still use your laptop screen when it's docked. The front of the stand features an opening so you can still use the…
How about I make this: ● Into this: ♥? Lenovo Thinkpad TrackPoint nub Replacement. Compatible with “Low Profile Soft Dome” keyboards (for example: Lenovo T450) If you are not sure which one you have, check out this Reddit post . It will…
Dubbed the “Lenovo Shoe” By experts (Me), this is a set of stands to allow for better airflow when you are using the Lenovo IdeaPad/ThinkPad on a deskmat or soft surface. Print 2, or extend the width of the stand and print one really long…
I've designed a holder to attach the dock to IKEA Skadis board. After importing the file, lay it flat on the side so that the hooks are parallel to the print bed. Make a copy and mirror it over the Z so you have a pair of holders.…
I use this adapter for faster and easier connection of my laptop at my office. Now i only need to plug in this adapter and it is connected with power, display and usb devices. For device connection, i use FITLONG 8-in-1 USB C Hub.
This pen holder slides into the tablet side slot for the original Lenovo holder and fits pens up to 10.5 mm in diameter. I'm not sure if the Lenovo pens will fit as I use a compatible HP Active Pen. Print the holder in STL orientation…
The original model featured a hole for a C7 Type connector (The one with only two pins) on one side. Because mine had an plug of the C5 Type (looks like an cloverleaf) it woudnt fit. I edited it so it fits for my plug. For this remix i…
The model consists of two parts: right foot holding the docking station and the ThinkPad left foot which attaches to the thinkpad only The right foot has a hole to access the power botton. The Lock for the key and the Kensington Lock is…
If you like the model, please give a like 💟 and post your prints 📸. 💡 Underware - Multiboard - ThinkPad Universal USB-C Dock holder 💡 💫 Recommendations PLA/PETG 0,2 mm layer yes support - for the lip on the top that holds the dock in place
U can use X1 tablet Keyboard as USB KBD. Please prepare following materials. -Strong small Magnet*2 -Any USB cable. -Al foil or any conductor. Category: Tablet
Due to the simplicity of the model no supports are needed. I printed with PETG with 0.2mm layer size on 0.4mm nozzle. The exact material and configuration you are using do not matter a lot though I guess.
Based on the Lenovo Thinkpad workstation W530. It was scaled down by 1:5 except the hight which was scaled by 1:3 to allow for a more rigid hinge mechanism. Clip the display onto the base. Display then can be opened and closed and should…
Since the feet of this Lenovo keyboard are very likely to break, I designed a new version for it that has a decent material thickness and printed it out of transparent PETG (very stable) with 100% infill. There are 3 Versions: - original…
Cable Clip for Lenovo Thinkpad Power Charger. It was made for the same size of wire. The power adaptor for 220v has similar thickness than the usb-c wire. Print Settings Printer: Kuttercraft Rafts: No Supports: No Resolution: 0.2 Infill:…
Camera cover for Lenovo thinkpad T14 Print Settings Supports: No Infill: 100 How I Designed This Category: Computer
Mount to secure lenovo thinkpad dock under a desk or on a wall. Made specifically for model number LDC-G2, but may work for others. Print Settings Rafts: No Supports: No Resolution: .3 Infill: 24 Category: Office
Thinkpad Think Track Cap (Thinkpad 13 ~2014) Cap mounts on the ~2.4mm square stick. between tje GHB keys. Category: Computer
Replacement badge for the Lenovo Thinkpad x220, its designed to be printed with multiple colors, but it can be printed in a single color as well. Size of the model : 26.5mm x 9.5mm Print settings: Layer height : 0.2mm Add color change on…
Ink pad with honeycomb needs to be perfect aligned. Insert it into the white gap and screw it (don't overtight) onto the back to hold it in place. 0.2 layer, 15% infill, supports on bed - best print orientation in photo Steps using…
This model is a heart-shaped replacement for the TrackPoint on Lenovo ThinkPads for modern ThinkPads. Ideally this print is printed with foaming TPU as this provides the best grip and doesn't risk damaging the screen when closed, but of…
Designed for keeping the Lenovo USB C Gen 2 dock and T14s Gen 1 laptop on the right hand side of the desk. Includes a foot to support the laptop should you want to keep the dock of to one end. Support me on ko-fi.
I used #10 1" screws, and only needed two screws per bracket. I used 3 brackets in this case.
Easy print with no effort at all. Make sure to print it slow. Otherwise, you will get a fail print.
Simple blank card to insert into a Thinkpad's express card slot, to prevent dust getting into the open slot. Tested on a Thinkpad X230, but should be compatible with any express card slot.
An help to stand up the Lenovo ThinkPad USB-C docking station - Inside dimensions → 81mm x 31mm - Outside dimensions → 120mm x 35mm I don't know if this works with every Lenovo ThinkPad USB-C docking station. I test it with the Gen2 Type…
Simple design prints lying on the side without supports -> Please print 2 for the open version In the slicer you can easily change the z height of the model to your liking, but don't change x and y 15% infill should be enough
I needed a place to store that ugly docking station. So I made one for the Thinkpad USBc dock. You can mount it under your desk, with double sided tape, Gorilla-tape will work fine. There are two options, one with a full cover, and one…
A simple but durable laptop stand for Lenovo ThinkPad laptops.
An under desk mount i designed for the Lenovo ThinkPad USB-C Dock Gen 2. When mounted at the desks edge the power button will protude and is perfectly reachable. The USB Ports and the audio jack are accesible from the front. If mounted…
Unfortunately the exhaust on the t480s is on the right side, while having warm air blown onto your mouse hand may be fun in winter it definitely isn't in summer so I decided to mitigate that. From my testing it did not decrease cooling…
FN Key Blocker // Lenovo ThinkPad
Print the two sides, insert screws. Screw under desk or on wall with the dock clamped between. You should be able to easily remove the dock if needed due too the brackets pivoting at the screw holes.
I made this wall-mounted holder for mine the Lenovo ThinkPad Laptop 65W AC-DC adapter to organize the workspace and manage cables in the office. I printed it from PETG and used a 100% infill. Like what you see? Click an image below and…
https://github.com/orbitinstasis/T420_KB_BLE/
This is a smart card reader cover for thinkpads. It is designed for T480 but it should work on others too. To make it look perfect, sand with ~600 sandpaper. Height of thinner part: 1.25mm Height of thicker part : 1.5mm Print Settings…
Printed Rubber Feet for the Battewry Side of a Lenovo Thinkpad x230t There are two Models Provided. The one on the Laptop is slightly Smaller then the two on the Battery. Printed with Extrudr Flex (TPU) 100% infill no Supports.
A holder for a Lenovo ThinkPad P15 Gen2 with holes for the laptop's connections and fan
This is a remix of 4sStylZ of a release by @pansono. I scaled up the width of the leg by 2.75% and added some parts that I'd call snappers. Why? Because with these, the leg folds back and forth with a satisfying snap, just like the…
Remix of this holder. Provides a better airflow if you're keeping the CPU and GPU running most of the time. Print Settings Printer: Artillery Sidewinder Rafts: No Supports: No Resolution: 0.2 Infill: 15 Category: Office
I got a Lenovo Thinkpad X1. It has a flashing red LED on the lid. I immediately thought of two options... Bender or Terminator. Position the tip of the cigar exactly on top of the LED. ;-) Printed in PLA - the color changes are included…
Decided to swap my 2.5" SSD for a faster NVMe version. While not officially supported, the X260 can accept NVMe drives, which improves performance (even 3x fold!) and reduces power consumption (barely, but it does) You can buy the cable…
My Lenovo Thinkpad T420 came with a 7mm drive and appropriate rubber rails, but I wanted to fit a 9.5mm drive in. This solves that. I guess this would be most like the original if you printed in TPU, but I printed in PLA+. I think the…
This is a remix of a beautiful and thoughtful model by CodeNameX from Thingiverse. I tweaked 3 things: Steeper angle for the device - it'll now face towards you Easily accommodate thicker devices Shorter back support to avoid collision…
I needed more space on my desk. I keep my laptop docked but it takes up a lot of horizontal space. This dock will hold a T14 Gen1 Thinkpad as well as a thin keyboard.
Since the inkpads seem to get more and more for some reason i cant explain, you have to prepare your soul to print several of these racks. Prints with no support
prometheus89 (Thingiverse# 4672383) designed a functional stand for his Tresanti sit/stand table but knowing myself, I wanted to anchor it to the table's frame and avoid any chance of pushing my laptop. Also, from looking at other…
A simple, printable stand for Thinkpad T490 or T495 laptops. Vertical and horizontal orientations are supported. Just print two copies, and you are good to go!
This vertical stand is designed specifically for Lenovo ThinkPad laptops (based on P14s), allowing you to position your laptop vertically on your desk. With the ThinkPad’s hinges that open to 180 degrees, you can still use the screen…
Mount your Lenovo ThinkPad Universal Thunderbolt 4 Dock to MultiBoard/Underware using Multiconnect Connectors! This model is uses the existing screw mounting holes and the inset edges in the Dock to lock the print to the Dock. It uses a…
This is a caddy for the Ultrabay SLIM version found on many Lenovo laptops. I recently acquired a Lenovo Thinkpad T440p with a DVD drive and wanted to add something more useful... rotational optical drives have been dead for years. So I…
I connect two usb-c docks to my thinkpad whenever I'm at my desk. It can be a little fiddly, so I made this holder that makes it really easy to connect both devices in one motion. Printed in PLA with a 0.6 nozzle.
A holder to clamp your ThinkPad dock on the backside of your Dell monitor. It fits perfectly on a Dell U2415, but it will probably also fit on other sizes from the same generation. There is enough space to access all cables and the power…
Dockingstation Informations: Width: 80 mm Height: 31 mm Model No. of DS: DUD9011D1
This time, I came into possession of a T22 without the HDD and the cover. So it is only obligatory for me to come up with something just like the IBM ThinkPad 560Z External SD Card HDD Caddy . With this SD2IDE caddy, you can use an SD…
Remixed from Shabubus M3 Macbook Wallmount. Printed with PETG 5 walls/30% Gyroid Infill
The combo port on my X13 was the bane of my existence, so I made a nice little cover that leaves the USB C port exposed, but hides the proprietary mini-ethernet connector. This is a very snug fit ! Once installed, it takes something…
Blank Serial UltraBay Slim for Thinkpad laptops. Category: Computer
Laptop stand for the Lenovo Thinkpad Extreme X1 (Gen1) Allows for a thight fit but not so that anything gets damaged or scratched. Larger base to allow for stable stand with a lot of pheriphials attached Step included if you want to…
Just a simple bracket to mount my Lenovo ThinkPad 230 watt charger to the wall and get it off the floor. This design is probably overkill and you could probably thin it out and be just fine. Just print 2, I used the standard 2 wall, 15%…
This is my take on the vertical laptop stand for the ThinkPad X1 Carbon 6. If you found this useful, please leave a comment. If you have a problem, also leave a comment. Thanks, Enjoy! Print Settings Printer Brand: Creality Printer: Ender…
I wanted to use @AL_3D's under desk dock mount, but I have the Gen 1 dock. Size specifications are the same except for the Gen 1 is about 33mm thick and the Gen 2 is 31mm. Slots were also added where ports would have been covered. I also…
Simple vertical stand for a ThinkPad T480, print 2 for proper stability. Category: Other
ThinkPad Ultrabay DVD bezel / Front plate 12.7 mm Not tested yet in a notebook, only fit on the drive. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 25% Filament: Prusament PETG Black…
