Search results: insulate

Counting matching models…

Ninja Creami - Insulated tub full file settings

No modifications to the original design. I just added the settings that work best on my P1S

Downloads: 47
Likes: 2
Rating: 0

Printables

Handgriff für zwei HiLo sports isolierte Trinkflasche/ Handle for two HiLo sports insulated drinking bottle

Wir nutzen die Trinkflaschen von HiLo Sports nicht nur bei Radtouren, sondern auch im Strandurlaub. Die Flaschen halten den Inhalt selbst bei praller Sonne bis zu 24 Stunden kalt. Der Edelstahl-Schraubverschluss verfügt über einen…

Order a print of this model

Printables

Xiaomi Imilab EC3 Wall Mount (Insulated Facade Version)

Custom-designed wall mount for the Xiaomi Imilab EC3 camera , optimized for installation on insulated facades (ETICS) . The model includes an integrated cable management compartment , allowing you to hide and protect wiring inside the…

Order a print of this model

Printables

Insulated cup Lid cover

The leg that held the lid's cover on snapped. So I designed this replacement. Was part of a large (1 liter?) mug my wife got from the Red Cross. I printed it in TPU to allow easy insertion, but could be done in other plastics. The…

Order a print of this model

Printables

Knipex Insulated Tweezer 92 27 62 Gridfinity

Knipex Insulated Tweezer 92 27 62 Gridfinity bin 1x4

Order a print of this model

Printables

Darkening caps for suction cups of insulated window covers VW T4

Stop light from entering through the suction cups holding the window cover. Loved the insulated window covers we got from https://www.bus-ok.de/T4-Isotherm-Set-innen-Thermomatten-fuer-Fahrerkabine-91-98-Top-Qualitaet for our VW T4. But…

Order a print of this model

Printables

Lock for Manthorpe GL250 Insulated Drop-Down Loft Access Door

My friend is renting out her flat and wants to leave some stuff in her loft - this ‘lock’ is screwed into the ceiling and stops the hatch being slid to the side so it can't drop down. To access the loft you have to unscrew the lock from…

Order a print of this model

Printables

LEGO Cup Drink Holder (double-wall insulated)

Life-size double-wall insulated LEGO cup! fits standard cans and keeps them cool! Uses a small wedge to keep the cans from falling out of the cup, and a small venthole in the bottom. Make sure to drop a follow and a like if you want to…

Order a print of this model

Printables

Insulated Terminal Covers for Sealed Lead Acid (SLA) Batteries

Enclosing two SLA AGM rechargeable lead acid batteries in a tight battery box for my solar power supply required protecting the exposed battery terminals to avoid the potentially dangerous condition of an accidental short circuit. The…

Order a print of this model

Printables

Insulated cup can holder - double wall design to stay cool - different logos

Life-size double-wall insulated cup! fits standard cans and keeps them cool! Printed mine without support, the nubsies on the lid worked for me no problem without support. try it. Aldo on the lower part the fasten open/close slot. no…

Order a print of this model

Printables

Wera Insulated Screwdriver mounts for kit 160i/12

Models can be found here in OnShape if changes are needed/wanted. https://cad.onshape.com/documents/936e43c43c7215fe751869ec/w/ec49f71c40bdcc68c26afb7c/e/39e56a9d78c5aabb23b0aae7 These are ridiculously over built, but they fit on my wall…

Order a print of this model

Printables

Insulated Telescope Dew & Light Shield

The design provides a clean finish to the top & bottom of a custom dew & light shield for use with an astronomical telescope. The light shield is constructed out 3/16" thermal bubble/reflective insulation sandwiched between two thin…

Order a print of this model

Printables

Lid holder for insulated mugs

My son created a lid holder to contain our plethora of lids for our equal amount of insulated mugs. No more storing them on top of glasses and having them fall all over the place.

Order a print of this model

Printables

Dewalt Insulated Screwdriver Organizer

An organizer for the Dewalt insulated screwdriver set DWHT66417. https://www.dewalt.com/product/dwht66417/insulated-vinyl-grip-screwdriver-set

Order a print of this model

Printables

12v fully insulated quick disconnect

Needed a proper way to connect some batteries. This was my solution.

Order a print of this model

Printables

Holder for insulated Screwdrivers from Wera

I had the need for a holder for my insulated screwdrivers from Wera (btw excellent resistant tools). The holder has six holes: 3x 10 mm and 3x 7,7 mm. It can be attached to a Metabo MWB 100 workbench on its T-slot (…

Order a print of this model

Printables

A glass holder (thermally insulated)

An air chamber is a thermal insulator.

Order a print of this model

Printables

Replacement Handle for 64oz Adventuridge / TAL / ALDI / Amazon Stainless Steel Insulated Growler

Did you break the handle on that great 64oz growler / water bottle you got at ALDI or maybe on Amazon? Use this model to print a replacement. The handle is attached to the growler's lid with a metal pin you can poke and pull out using a…

Order a print of this model

Printables

Kato Unitrack Insulated Unijoiner Alternative - N/HO Scale

When in need of a Kato Unitrack Insulated Unijoiner , this 3D-printable solution is ready to click into place. Designed as an alternative to Kato’s 24-816 or 24-819 insulated rail joiners , it provides reliable electrical isolation for N…

Order a print of this model

Printables

EIBOS Cyclopes Riser - Bulkhead, Shielded, Insulated

I also observed the disappointing flaw with the EIBOS Cyclopes (not cyclops. In my head I pronounce it as “sigh-clop-ees”) filament dryer. The heating element and fan are way too close to the filament spool and normal operation causes…

Order a print of this model

Printables

109mm Insulated Thermos Holder For Car

I needed this car cup adapter to have a slot for a handle, and for the holder to accommodate a drink vessel that was up to 109mm at the base. It fits the cup holder in my Nissan Maxima perfectly. I printed its test model in PETG for…

Order a print of this model

Printables

0-Support Electrical Bar Insulated Standoff

Print with the thick side flat on it's face. The smaller end will be self supporting.

Order a print of this model

Printables

Parkside Insulated Screwdriver Set Gridfinity

A Gridfinity box to hold Parkside VDE Screwdriver Set

Order a print of this model

Printables

Insulated Can Cooler, 2-Pack

Available in 355ml/12oz & 500ml/16.9oz. Requires 4x 4mm Screws (or you could just glue it…) . Screw holes are 25mm deep, accommodating many screw lengths. Very minimal supports required on Handle (pivot diameter) and Base (screw holes).…

Order a print of this model

Printables

Wiha 283109 insulated screwdriver latch

The latch for my screwdriver kept falling out, so now I can print one anytime it pops out and gets lost.

Order a print of this model

Printables

voron v2.4 350mm insulated enclosure panel clips

i got tired of the 360 degree view of my abs parts warping off my bed due to lower than optimal chamber temps. in my room my chamber temps topped out at 58C. larger abs prints warped off the bed or warped the spring steel print surface…

Order a print of this model

Printables

Organizer for Wiha 19 piece Insulated Screwdriver set SKU: 32095

One holder per driver, labeled, with provision for a magnet (Macmaster 5857K17, 1/8" Thick, 5/16" OD). Used this to remove the set from the bulky, and clumsy molded plastic case it comes from the factory. Can be used with other sets if…

Order a print of this model

Printables

Insulated can holder (vase mode)

This is an insulated can holder optimized for vase mode printing to save time and material. PETG is recommended for strength, durability, and a bit of flex. The design comes in two versions, sized for standard 66mm diameter aluminum cans…

Order a print of this model

Printables

Insulated Can Holder

Should fit a standard 12oz can. There is an airgap that can be filled with material for customizing the feel of the holder and possibly keeping the drink cool.

Order a print of this model

Printables

Insulated Can Cozy with Lid (Parametric)

Print with TPU. I designed it with integrated support to optimize it for single filament printers. Simply print it oriented with the lid down and support turned off, then the integrated support will easily tear off. There is also a file…

Order a print of this model

Printables

Insulated can holder “Cold & Color”

Tired of drinks getting hot too quickly during parties or sunny days? Here’s the perfect solution to keep your beverage cool and stylish: the Cool & Color Insulated Can Holder! Picture this: on a hot summer day, while everyone else is…

Order a print of this model

Printables

Quechua Insulated bottle cap seal (TPU)

Material : TPU (95A used and it works lovely) Layer H : 0.16-0.32 mm Infill: 100% Nozzle D : 0.4-0.8mm Color: of your choice Scalable : No Estimate print time : aprox. 19 min

Order a print of this model

Printables

Handgriff für HiLo sports isolierte Trinkflasche/ Handle for HiLo sports insulated drinking bottle

Wir nutzen die Trinkflaschen von HiLo Sports nicht nur bei Radtouren, sondern auch bei Strandurlauben. Die Flasche hält den Inhalt selbst bei praller Sonne bis zu 24 Stunden kalt. Der Edelstahl-Schraubverschluss verfügt über einen…

Order a print of this model

Printables

Gridfinity tray for Facom insulated screwdrivers

A 3x7 Gridfinity tray for Facom insulated Protwist screwdrivers. Not a perfect fit but does the job

Order a print of this model

Printables

Insulated whatever-size-you-want(ish) Frankenclosure

I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store Background story: I ordered a tent-style…

Order a print of this model

Printables

Handgriff für zwei HiLo sports isolierte Trinkflasche/ Handle for two HiLo sports insulated drinking bottle

Order a print of this model

Printables

Insulated water bottle bottom protector

I always end up with dents on the bottom of my insulated water bottles before long, and it seems to affect the insulation capability of the bottles as well. This is a cover for the bottom to protect it from dents. Printed with…

Order a print of this model

Printables

DiamondGrip Can Sleeve – STL for 3D Printed Insulated Drink Holder

3D model description 🔒 For personal use only. If you wish to sell prints, commercial licenses are available via our Patreon: 👉 https://www.patreon.com/printforgeau Upgrade your sip game with the DiamondGrip Can Sleeve – the ultimate…

Order a print of this model

Printables

Decathlon Forclaz MT900 Air Insulated Sleeping Pad nozzle adapter for Flextail Zero pump

With this nozzle you can inflate your Decathlon Forclaz MT900 Air Insulated Sleeping Pad with a Flextail Zero pump. Print in TPU.

Order a print of this model

Printables

Gridfinity Crimp Tool, Ratchet, 20-10AWG 0.25-6mm Insulated

Arbeit Organisieren

Order a print of this model

Printables

Shorter Feet for OMLET Insulated Chicken Drinker

Our Silky Chicken was too short for the drinker, so I designed ~40 mm shorter feet. Snap in like the original ones. Printing No Supports neccessary Remove the built-in support after printing Print preferably from PETG or other higher…

Order a print of this model

Printables

Xiaomi Imilab EC3 Wall Mount (Insulated Facade Version)

Order a print of this model

Printables

Insulated cup Lid cover

Order a print of this model

Printables

Knipex Insulated Tweezer 92 27 62 Gridfinity

Knipex Insulated Tweezer 92 27 62 Gridfinity bin 1x4

Order a print of this model

Printables

Lid Holder for insulated mugs

We have a lot of insulated travel mugs in our house that we use daily for coffee etc. They were everywhere and always falling out of the cupboard. I started to create this and my son did it in under 10 minutes while I struggled….. I hope…

Order a print of this model

Printables

Aegis Chamber – Voron V0.2 Insulated Enclosure

Vormontierbarer Rahmen mit Hammerhead-Nuts + TPU-Sealing Repo: https://github.com/WhsFortune/Projekt-Aegis Der Voron V0 hat 1515-Extrusionen – verschraubte Panels sind trotz No Drop Nuts nicht immer frustfrei zu warten... Aegis löst das…

Order a print of this model

Printables

Halterung für Deckel der HiLo sports isolierte Trinkflasche/ Mount for the lid of the HiLo Sports insulated water bottle

Wir nutzen die Trinkflaschen von HiLo Sports . Um die Deckel ordentlich zu lagern habe ich dieses Modell entwickelt. Es ist an der Innenseite der Schranktür befestigt. Die Deckel werden in die Halterung eingeschraubt. Translation:DeepL We…

Order a print of this model

Printables

Adjustable Fully Insulated Battery Spot Welding Jig, No Metal Parts

Full Insulation Design : The jig has no metal parts and is completely insulated, helping to prevent accidental short circuits. Compatible Battery Types : It supports 18650 lithium ion batteries and can also be used to hold 14500 and 21700…

Order a print of this model

Printables

1/4 drive socket set insulated covers

Insulating covers for 1/4 drive socket set 4-13mm and extension bars 50mm 75mm and 100mm plus install tool to line up the square hole in the 7-13mm covers to the 1/4 drive in the socket and allow you to press it on about 5mm before…

Order a print of this model

Printables

Insulated Pipe Bend Protector - 80mm OD - DN110 notch

Protects insulated piping from rubbing and damaging its insulation when exiting a PVC conduit. Made for 80mm outside diameter. Has a notch that holds the piece on top of a standard DN110 european PVC conduit (KG- or HT-Rohr). Needs…

Order a print of this model

Printables

Replacement Cap for Negro 500 / Thermos Ultralite 500ml Insulated Sports Bottle

This is a replacement cap designed for the Negro 500 sports water bottle. It is a direct clone of the Thermos Ultralite 500ml insulated bottle and other identical generic versions sold on Amazon. If your original lid cracked, broke, or…

Order a print of this model

Printables

Heavy Duty Strap Ring for Insulated Water Bottle with 70mm Lip

The ring ID is slightly undersized for a press fit and has a special profile to print accidental slipout. The slot is has ample height and with for complex paracord weaves or a heavy duty webbing strap.

Order a print of this model

Printables

Arduino Uno or Leonardo (bottom to electrically insulate)

remixed to add bottom, reduce hole size so m3 threads itself in, thickened the walls and built in more tolerance for board irregularities. I converted stl to a step file and posted that also. m3x4mm screws to hold the board secure.…

Order a print of this model

Printables

Yeti/Ozart Trail / Insulated Mug Handle v2

I needed a simple handle for a friends generic yeti style mug but I didn't like how ( https://www.thingiverse.com/thing:918308 ) needed supports and it ruined the finish on the handle. So I whipped this up in Fusion360 in 15 minutes and…

Order a print of this model

Printables

Insulated Spade Connector Holder Block

Designed for use with a segmented EFHW amateur radio antenna. The block holds red 22-14awg insulated spade connectors and will not let them separate under lateral tension while strung up. (As long as the terminals connected are smaller…

Order a print of this model

Printables

Wire straightener for 18 AWG uninsulated wire, v1

Two printed parts, five bearings (MR128ZZ (12mm outer, 8mm inner, 3.5mm height)), five M3x10mm screws and five nuts. Operation: You have to twist and turn the straightener as you drag it along the desired length of wire. I think I will…

Order a print of this model

Printables

waterbottle Handle for 64 oz insulated water bottle

This is a pressure fit collar and handle for a hydrapeak 64 oz waterbottle made from pla Category: Household

Order a print of this model

Printables

LGB G-Scale Insulated Track Joiner

I needed some track insulators for my LGB style G-Scale layout. However, some were to be temporary, so I didn't want to modify the track segments. I created a custom Male-Female insulator (as well as a standard Female-Female). These are…

Order a print of this model

Printables

Foamboard Box Corners - custom board game box, lightbox, insulated enclosure

These corners are designed to allow you to make a hinged box up to any size foam core board that you have with no glue required! Scaled to use standard Dollar Store size foamboard, I believe it could also be scaled to work similarly with…

Order a print of this model

Printables

Anel Insulated Hive Entrance Reducer and Frame Division

The Anel insulated hive stock entrance is large for a new hive install or split. This reducer can be used Winter or Summer and flipped to close off entrance on a single side or transport. The names Left and Right allow for the entrance to…

Order a print of this model

Printables

Gridfinity Wera Insulated Screwdriver Stand

A simple holder for a set of six screwdrivers. Designed around a set of Wera insulated drivers, but easily adapted to others. The base is one piece, and the top and legs a second. Both are printed upside down, and joined with small…

Order a print of this model

Printables

Insulated Bottle TPU Ring

Suites Thermos Ultralight Insslated Bottle (66 mm diameter). Ring diameter is 60mm. Needs to be printed with flexible filament.

Order a print of this model

Printables

Insulated Precision Screwdriver Rack

This is a compact rack for the Mastercraft Insulated Precision Screwdrivers set (6 pieces) (#057-3604-2) No support is needed if printed on its side. This object main web page is:…

Order a print of this model

Printables

Insulated Screwdriver Rack

This is a compact rack for the Mastercraft Insulated Screwdrivers set (8 pieces) (#057-3695-4) No support is needed if printed on its side. This object main web page is: http://www.ctheroux.com/insulated-screwdriver-rack/ . You can…

Order a print of this model

Printables

Turner Adaptor for 500ml Double Wall Insulated Bottle

Adaptor is 36mm Diameter including thread, 6mm pitch. Fits a turner shaft diameter of 20mm. Fitted for Anko brand from Kmart. Should fit other brands using their OEM's design, but not tested.

Order a print of this model

Printables

16oz Stanley Insulated Cup Lid

I lost my lid for my favorite drinking cup years ago, I made a replacement. There are 4 versions: Lid without a drinking hole or thumb grip Lid without a drinking hole with a thumb grip Lid with drinking hole and no thumb grip Lid with…

Order a print of this model

Printables

Insulated Screwdriver Holder / Rack - Magnetic

I bought some insulated screwdrivers from AliExpress (see link below) and I wanted a holder for them. I decided to make it magnetic. The holder has a tapered circle to match the taper on the handle of the screwdriver so they fit in more…

Order a print of this model

Printables

Insulated can holder

I used can cooler 500ml, Dosenkühler by Mr.(Pr)interesting and mixed it with handle from Can Mugger - Insulated Drinking in Style by Triple G Workshop . Works fine with 500ml cans you can find usually in EU. Enjoy! (Model on photos is not…

Order a print of this model

Printables

20oz Ozark Trail Insulated Tumbler - Handle

Have a cup, need a handle? Print instructions Inspired by jasonalday designs https://www.thingiverse.com/thing:2668183 Needed a handle that attached at the bottom to not obscure the grinch face on my mug. No glue or adhesive needed, the…

Order a print of this model

Printables

Insulated Can Cozy, With Crush Ribs

I like insulated can holders to help keep a drink cool, and made a 3D-printable version! The main tricky part in designing this was figuring out a way to make the can fit snugly without making it too tight. The problem with making…

Order a print of this model

Printables

Clean Hydration Mug 12 insulated ceramic mug cup holder adapter for a Tesl

This is a pretty specific design for my needs, but this allows a Clean Hydration ceramic lined insulated mug to fit nicely in a Tesla Model 3 cup holder, with a cup holder insert in it. The included FreeCAD file would be VERY easy to…

Order a print of this model

Printables

Insulated Can holder! (or Coozy or Koozie or whatever you want to call it...)

UPDATE: I finally realized why my handle wasn't right and updated the model. The v2 version should print better. Here is my take on the insulated can holder. Insulated you say? Yes. Only you need to buy a can of spray polyurethane foam…

Order a print of this model

Printables

Beer coosie insulated with handle

Beer coosie insulated with handle Also fits 500ml water bottle Category: Outdoor & Garden

Order a print of this model

Printables

Beer Can insulated holder

Beer Can insulated holder Also fits 500ml water bottles 5% infil provides air space for insulation Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 5% Filament: MatterHackers.com…

Order a print of this model

Printables

Handle for 30oz Insulated Tumbler

Designed in Onshape, model available here: https://cad.onshape.com/documents/8a46735937a058ceb06fb0f2/w/c96c660f03c11aaf12179a62/e/501e3072f520c0d65a561e53

Order a print of this model

Printables

Insulated cup cup holder adapter

The bottom fits in my car's cupholder, and the top is larger to fit the insulated cup that wouldn't fit anywhere else. I'm not sure how standard car cupholders are, but it fits snugly in a 2014 Ford Territory! If you live in hot places…

Order a print of this model

Printables

Cover for KleanKanteen insulatet

Uppdate 23.10.13

Order a print of this model

Printables

Ozark Trail 32 oz Vacuum Insulated Stainless Steel Tumbler Handle

Ozark Trail 32 oz Vacuum Insulated Stainless Steel Tumbler handle 3-4 walls 15-25% infill PLA+ , PETG or ASA something water resistant.

Order a print of this model

Printables

Dual insulated pipe hanger

I made this to support some insulated pex I was running along the wall of my garage (not because it needs to be insulated but because exposure to UV light can eventually cause pex to fail). The actual diameter of the insulation I was…

Order a print of this model

Printables

YETI Insulated Can Cooler 16oz to 12oz Adapter

Some quick and dirty spacers for the YETI 16oz Insulated Can Cooler to adapt it to fit 12oz cans. The model “Yeti Spacer.stl” is hollow, while the model “Yeti Spacer (Additional Weight).stl” includes an internal cavity that can be filled…

Order a print of this model

Printables

Insulated Can / Drink "Coozie", drink cooler

Check out the models for insulated version (with hollow gap for wool felt) or solid plastic only version. I've included step files and Fusion360 CAD files. Enjoy! Add a “pause print” command in your slicer (or do it manually) to pause…

Order a print of this model

Printables

GASLANDS: Insulated Blowers

The latest mods from Ellie Valkyrie's garage! The latest in Gaslands: Glacierlands equipment to keep your ride roaring like a sabretooth kitten! Requires supports. If you like my work and want to see (and print) more of it, please…

Order a print of this model

Printables

GASLANDS: Insulated Exhaust Pipes

The latest mods from Ellie Valkyrie's garage! The latest in Gaslands: Glacierlands equipment to keep your ride roaring like a sabertooth kitten! Requires supports. If you like my work and want to see (and print) more of it, please…

Order a print of this model

Printables

GASLANDS: Insulated Armor Plating

The latest mods from Ellie Valkyrie's garage! The latest in Gaslands: Glacierlands equipment to keep your ride warmer than it would be if it were full of holes! Requires supports. If you like my work and want to see (and print) more of…

Order a print of this model

Printables

Carabiner attachment for 24oz Thermos insulated jar

Uses the existing indentation to fashion a band that has a hole to attach things to it. Secured with M3 socket cap bolt and nut. Attaches to: THERMOS Stainless King Vacuum-Insulated Food Jar, 24 Ounce, Army Green

Order a print of this model

Printables

Klein Insulated Screwdriver Holder for Wall Control

Simple screwdriver holder for Klein Insulated screwdriver set. Designed and remixed to fit the Wall control organizer wall panels, using the DDD wall control accessories. This is designed to have a good fit and the screwdrivers nest 7.5mm…

Order a print of this model

Printables

Draft spacer clip for windows/doors with insulated PVC and aluminium frames

Insert into the mounting channel, twist and slide over the locking plate. For Euro-style window frames with 6mm mounting channels and locking plates. WARNING: This part is not a security device! Unsecured windows and doors, accessible…

Order a print of this model

Printables

Monogrammed, Insulated Cover for Thermos - vintage Coleman variety

Insulated cover for vintage Coleman thermos, water bottle, jug cooler. Also a handy bowl to put screws in, when working on stuff, at the shop. It looked like this drink cooler / hot soup thermos was missing a bowl that goes on top. You…

Order a print of this model

Printables

Ninja CreaMi Insulated Tub Cozy (thermos)

A handy thermos cozy thing for Ninja Creami containers. Dual wall design with a large air gap in between for proper insulation. Keeps ice cream tubs cooler and ice-creams unmelted significantly longer Prevents water condensation and drips…

Order a print of this model

Printables

Deckel (Staubschutz) für HiLo sports isolierte Trinkflasche (Radflasche)/ Lid (dust cover) for HiLo sports insulated drinking bottle (bike bottle)

Die wirklich überzeugende isolierte Metall Fahrrad Trinkflasche von HiLo sports hat keinen Deckel der das Mundstück sauber hält. Gerade auf längeren Fahrradtouren empfinde ich dies weniger schön. Aus diesem Grund habe ich dieses Model…

Order a print of this model

Printables

Darkening caps for suction cups of insulated window covers VW T4

Order a print of this model

Printables

Insulated water bottle container

This is a simple insulated bottle container. It's designed around standard 500ml water or coke bottles. It may keep water or beverages cool for longer time in heat days. There are slots for a shoulder strap. A 25-30 mm strip of fabric is…

Order a print of this model

Printables

Insulated bottle collapsible handle

This uses the 2 original pins and a piece of filament as hinges, use a soldering iron or similar to fuse the outside of the filament piece with the upper component. Probably only works on this exact model of insulated bottle. I also…

Order a print of this model