86 models
Safer, Tougher and Easier to play with than other designs Here we have the Pointless Impossible Passthrough Cone. This has been specifically designed to be easier to play with There are no pointy parts on this design and its much less…
Go to https://www.patreon.com/lilykill to support the original creator. Materials selection: Handle - I recommend a wood-filled PLA, but not the Bamboo powder ones. They're too light. I used a walnut filled PLA to get a darker finish,…
What makes it special This one takes my octagonal pointless passthrough and adds a semi-4D edge design to it. The unique edges go into an easy and fast passthrough print. A bold color scheme helps it stand out, since a plain one can look…
You have option!! Four option on the pintle hitch alone Pintle hitch . Connects with 3mm eye bolt. Works better and cost less. https://amzn.to/3W2ogoN (US Amazon Affiliate link) Strongest Pintle- Uses a 3mm Eye Bolt cut to to allow the…
Flintlock Pistol for Carnival On the search for a matching gun to my carnival costume, I was unfortunately not found. So I created myself from several models that I could find myself a suitable. And have designed this beautiful Flintlock…
This is a remix of an older model by Mieszko Lacinski . I did some cleanup of parts that didn't fit together, and modified for easier printing. Separated the dragon head at the base of the hilt into it's own piece. Combined some of the…
Giant Brick Pirate Flintlock Pistol (x10) Print two part and two join
Fun spiral fidget by L3D PrintLab
I designed this. printed the handle in two parts and used the pin to help hold it together. I ended up printing this at 80% so that it fit my hand so you may want to check that out. Everything printed fine and fit together no issues.…
This model is compatible with the lego system.
Put your precious valuables in this over-engineered box. Print settings: The lid will need supports on the inside.
What makes it special The rounded corners are what I notice first when I pick this one up. There are nearly no sharp points on it at all, and that soft edge is the whole point of the pointless version. It sits in the BEST series alongside…
What makes it special This one is the simpler shape in the series, and that is part of why I like it. It is a simple print, and once it is off the plate it makes a fidget I can keep turning over for hours. The pyramid form is easy to…
I purchased the INTLLAB vortex mixer to mix the paints I use for my miniatures. The shape of the mixer's top plate works well if you mix your paints cap-down, but it's hard to keep the bottles in place when they are upright. I've…
Printable in 16 parts and built around a simple elastic band mechanism for the hammer and trigger. Designed so each part can be printed separately in your chosen colours. Assembly requires: An elastic band Glue Patience Tweezers (helpful…
The BT-7 was a Soviet fast tank developed in the 1930s. It was designed to be highly mobile and could travel on either tracks or wheels, allowing it to move quickly across roads. The BT-7 was armed with a 45 mm main gun and machine guns,…
The KV-2 was a Soviet heavy tank used during the early years of World War II. It was developed to destroy heavily fortified enemy positions and was armed with a powerful 152 mm howitzer mounted in a large, box-shaped turret. The KV-2 had…
Command the high seas with this striking Female Pirate Captain display model, sculpted in a confident, battle-ready stance. Wearing a flowing long coat and classic tricorn hat, she stands firmly with one hand on her hip while holding a…
Be a pirate Works on all 13 bots Supports required
This model is meant to roll 2 standard D&D dice at a time. You load it by pull the trigger back, front load the dice, resetting the trigger, and then you pull down to release the dice onto the table. The size of the model is the…
Ever wanted to setup a Victorian duel between your friends? How about a pirate boarding battle? A cosplay prop for your renfaire outfit? Or just a historical desktop fidget? Firing Video! Design Video Designed after a 'Queen Anne' pistol…
Infill 10% each. approx 6 hrs to print on ender 3 w/ .6 nozzle Needs supports Feel free to edit and remix.
The Leopard 2 is a modern main battle tank developed by Germany in the 1970s and introduced into service in 1979. It was designed to provide strong protection, high mobility, and powerful firepower. The tank is equipped with a 120 mm…
Educational model of of pintle style rocket motor injector. The model is simplified to use only one liquid input which you can fit to common ¾" piping such as garden hose or insted of a shower head (well injectors are kinda shower heads,…
What makes it special Nine sides, no sharp points, and a twist that keeps passing through. This one is a fun fidget and a straightforward print. It has nine edges, and I smoothed them all down for a better, smoother look. The modern shape…
A custom pintle mount for your ragefire. Uses 2 M3-12 screws and any kind of 4mm-ish screw, I used an old drywall screw… It's a little tight, and it's not quite perfect. Either way it works for me and can work for you.
This model I have created is a mini Tiger 1 tank . The Tiger 1 was a famous German heavy tank used in World War II. It was known for its very thick armor and powerful 88 mm gun, which made it dangerous to enemy tanks even at long…
A simple infinity cube toy by L3D Prints Do not sell this model You can also find this fidget and many more on MakerWorld: Link - https://makerworld.com/en/models/2753959-infinity-fidget-cube-by-l3d-Prints
The M1083 Medium Tactical Vehicle (MTV) is a U.S. military 5-ton, 6x6 cargo truck that is part of the Family of Medium Tactical Vehicles (FMTV). It is designed to transport soldiers, supplies, ammunition, and other equipment in a wide…
The M1 Abrams is an American main battle tank designed for modern warfare. It was first introduced into service in the early 1980s and is named after General Creighton Abrams, a former U.S. Army commander. The Abrams has heavy armor,…
Best in brown or orange filament normal is for action figures and large is for, well I don't really know you can choose.
print with at least 6 walls
The King Tiger was a powerful German tank used during World War II. Its official German name was the Tiger II, and it was introduced in 1944. It had very thick armour and a powerful 88 mm gun, which made it dangerous against many Allied…
What makes it special I kept coming back to the BEST Vortex Series when I made this one, because the smooth, rounded shape is what makes it fun to handle. It is a super easy print, with a lot of filleted edges and smoothened corners, and…
The IS-2 was a Soviet heavy tank developed during World War II. It entered service in 1944 and was designed to provide the Red Army with a heavily armoured tank with a powerful gun. The IS-2 was named after Joseph Stalin , and it was…
The Panther G was a German medium tank used during World War II. It was an improved version of the Panther tank, featuring better armor protection and reliability than earlier models. It was armed with a powerful 75 mm KwK 42 gun, which…
Ahhhh, art. Where would mankind be without it? Well, not filling perfectly good objects with holes for the amusement of the internet that's for sure. Another thing mankind probably wouldn't have made it here without is our friend the…
I wanted to make a classic flintlock pistol out of cardboard one day, and was disappointed when it didn't work. I hopped onto tinkercad, and decided to try to make one that I could 3d print, for a little more durability and consistency.…
Remix of the INTLLAB Vortex Mixer Adapter by Ompapamowmow , resized for Citadel paint pots. Tested and works.
The Jagdpanther was a German tank destroyer used during World War II, first entering service in 1944. It was built on the Panther tank chassis and was armed with a powerful 88 mm Pak 43/3 anti-tank gun. The Jagdpanther had sloped armor,…
Have fun with the pointless button, i hope you all like it ;) Just print without support and pretty slow at .2 or .15 and it is working fine :D
Modification of the original engine mount of the 3DPrintLab free model of the Piper J3 CUB . Main problems solved are Motor with mounted connector can freely use this mount without destructive modification. Motor I use has short screws…
As requested by a Reddit user. The dimensions are 330×330×330 mm (box) and 325(340)×77×102 mm (trays). 3 mm thick walls. Please don't waste your time printing it. Not everything needs to be 3D-printed.
More details and discussion on real solutions welcome at https://forum.v1e.com/t/lr3-mod-diverting-shaving-piles-avoid-excess-shavings-in-under-bearing-wheels-causing-inaccuracies/34020
An Armoured Personnel Carrier (APC) is a military vehicle designed to transport soldiers safely through dangerous areas. It has strong armour to protect the crew and passengers from bullets, shrapnel, and other battlefield threats. APCs…
Want to support my work? Support me via paypal here: https://www.paypal.com/paypalme/L3DPrintLab I've always wanted to learn more about Canadian aerospace engineering, so I decided to design this model of the Avro Arrow to see firsthand…
The A34 Comet was a British cruiser tank developed by Leyland Motors during the Second World War. It was based on the earlier Cromwell tank but had thicker armour and a more powerful 77 mm HV gun, giving it better protection and…
I used Polylight for the filament as it is stronger than normal PLA, but please try what ever you think is better.
I originally made this model for a game, but the development never went ahead, witch means its not very optimized for printing
The IS-2 was a Soviet heavy tank developed during World War II. It entered service in 1944 and was designed to provide the Red Army with a heavily armoured tank with a powerful gun. The IS-2 was named after Joseph Stalin, and it was…
I made jointlinks for 6mm rods to connect each other and between. Cause for this design is an Ornithopter-Project I'll probably never gonna finish. XD So if you just want to connect 6mm rods with 270° movement - this is your design. ^^…
The Flakpanzer IV Kugelblitz was a German anti-aircraft tank developed during World War II. It was based on the chassis of the Panzer IV and was designed to protect German troops and vehicles from enemy aircraft. The Kugelblitz was armed…
I use Mainstays 46 cup storage containers for parts washing for my Saturn. Picked up a INTLLAB magnetic stirrer off amazon, and found it was smaller than I was expecting. This keeps the container stable on top of the stirrer. I printed…
Even More Pointless! Here we have the Pointless Passthrough Hexagon - Mk 3 This has been specifically designed to be tougher with no pointy parts making its much safer and difficult to break. The Large Version a similar size to the…
Lego flintlock at 10x the scale. Most of the measurements are accurate, but some are not. I recommend to print the split version and glue the two parts together. Print Settings Printer Brand: Artillery Printer: Artillery Sidewinder X1…
Made this to practice keying models
These are pointless little boxes. They will hold various small items - such as a few coins, tiny seashells, an expensive pinky ring, a small amount of salt, a favourite pebble, a crumpled little piece of paper with your favourite word on…
Even More Pointless! Here we have the Pointless Passthrough Cone - Mk 3 This has been specifically designed to be tougher with no pointy parts making its much safer and difficult to break. The Large Version a similar size to the previous…
After some troubleshooting with size and detail, I've devised this set (alphabet only ATM) of telegraph keycaps which have replaced the letters with international Morse code symbols. J and F keys (for QWERTY setups) do not have home…
A clean, modern 3D printable desk decoration designed to enhance any workspace, shelf, or creative corner. This model is optimized for FDM 3D printing and designed with simplicity and visual appeal in mind, making it suitable for both…
Mini tank terrain pack #1 by L3D PrintLab for my mini tank collection.
Added a built-in fan grill ( https://www.thingiverse.com/thing:1595208 ) The holes countersunk and sized for normal PC case fan self-tapping screws. I am not sure why the thumbnail looks like that, but it prints fine. Print Settings…
Use this to install new pintle caps on the injectors. It protects the pintle cap, and has a hole in the middle so you don't accidentally hit the end of the injector. Just slip the new pintle cap onto the end of the injector, slide the…
A blunderbuss with working hammer and ramrod. It comes with a powder flask and ammo as well. You can edit the model to however you like and can turn it into a Musket by removing the barrel tip, a pistol by removing stock and barrel,…
Pointless?!! Why? Well, let's be honest; there's absolutely no physical need for this cover designed to fit nrp's very practical fume extractor. The extractor does a perfectly good job without any frills. Buuuuuuut... I couldn't resist…
No point, I'm sure there are many much simpler paper towel holders to be found :) Threads modified so they screw in easily without post processing.
A modified pintle hitch that works with (RC-Time)s axial cj7 rear bumper that i modiefied
Mini KV-222 Tank By L3D Printlab About 1:200 scale This tank prints as one piece so it needs supports but they are easy to remove without breaking the model. If you liked printing this model please leave a like and if you have a…
The stainless steel top was corroding due to salt water and various chemicals used in testing. This is a friction fit cover to prevent further damage. Link for the mixer if you would like one of your own.…
Designed so no gluing is required, it just slips over the power connector on the back. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2 Infill: 20 Filament: Generic PLA Category: 3D Printer…
A remix of Ompapamowmow's excellent INTLLAB Vortex Mixer Adapter , resized to fit Vallejo Metal Color paint bottles.
So I was making the flintlock pistol below and wanted to make it easier to paint so I designed a couple of little things to help. https://www.printables.com/model/1008648-flintlock-pistol-prop-with-functioning-action Trigger Plate: goes…
3D.PrintLogo for Cap - UpDate Logo to screw on If you’re not taking your cap off whilst enjoying the best hobby in the world, you should also show what it’s all about. Here’s my logo design, which fits anywhere there’s a small hole. The…
This is a 2U Right-Stepped Slash & IntlRo Keycap. Only left side of the key switch activates even if you press the right side of the keycap. This keycap uses OEM profile. I made this keycap because key rollovering with IntlRo didn't work…
It's just a POINTLESS STICK :) Might make it less pointless if we get 30 downloads
It's just a POINTLESS STICK :) Might make it less pointless if we get 30 downloads
This is a 2U Right-Stepped Slash & IntlRo Keycap. Only left side of the key switch activates even if you press the right side of the keycap. This keycap uses OEM profile. I made this keycap because key rollovering with IntlRo didn't work…
Ever wanted to setup a Victorian duel between your friends? How about a pirate boarding battle? A cosplay prop for your renfaire outfit? Or just a historical desktop fidget? Firing Video! Design Video Designed after a 'Queen Anne' pistol…
A modified pintle hitch that works with (RC-Time)s axial cj7 rear bumper that i modiefied
Command the high seas with this striking Female Pirate Captain display model, sculpted in a confident, battle-ready stance. Wearing a flowing long coat and classic tricorn hat, she stands firmly with one hand on her hip while holding a…
So I was making the flintlock pistol below and wanted to make it easier to paint so I designed a couple of little things to help. https://www.printables.com/model/1008648-flintlock-pistol-prop-with-functioning-action Trigger Plate: goes…
This is a GenCo Microwerks shell for the X-Shot Micro, a tiny powerhouse of a blaster. All the hardware you need is already provided by the Micro. You just need to print parts in the colors of your chosing and you're good to go to take a…
