P
Printables
chips
backgammon chips
Search results: ips
Counting matching models…
P
Printables
Adapter for additional tips for the Logitech MX Ink base
Print to scale, suggested about 5cm side.
P
Printables
3M respirator straps clips
Loose ends in respirators can be annoying. Apart from this they can be very dangerous when used with rotary or other power tools. This print allows to keep the ends fixed. Wider clips attach to the lower strap, narrower ones to the top…
P
Printables
Framing Clips Pre-Connected
i couldnt figure out how to connect the separate pieces so i just took them into blender and added a boolean to fuse them together by default so i thought i'd upload that for people's use. it's very difficult to print the 90 without it…
P
Printables
Phillips HUE Button - LK adapter
Adapter for fitting a Phillips HUE button over a LK breaker. Models uploaded for 13x1 mm magnet and 10x2mm magnet.
P
Printables
Riser legs for Philips Series 3200 coffee machine
I made this model because I needed access to easily clean under my coffee machine. It's not a complicated or cool model but it does the job. Fits for Philips Series 3200. Enjoy .
P
Printables
Duspol Tipsaver
Replacement for original tip saver for Benning Duspol and other similar testers. Can be attached to connection wire. Should be secured with 2,5 mm zip tie.
P
Printables
Drill Dust Collector with Grips
Added some finger tabs to help hold it/keep fingers away from the bit
P
Printables
clean pod Philips S8000
Got a Philips series 8000 wet and dry shaver. The bundle didnt include the quick clean pod. The original is just a bowl with lid and otherwise empty, no function at all for the money they ask for. The cartridges with their secret cleaning…
P
Printables
Poker Chips (Single Color) 单色扑克筹码
Translated by Chat-GPT This is a simple and easy-to-print poker chip designed with a single color, so there’s no need to change colors during printing. Since it’s a single color, I used other methods to simulate the white Edge Spots…
P
Printables
Shopping Cart Coin Collection / Einkaufswagenchips Sammlung
This is a small collection of simple shopping cart coins, the size is that of a 1-euro piece. Printed with a layer height of 0,2 mm, I'm changing the filament on layer 8 to get a second color. February 4th, 2026: Added two new chips:…
P
Printables
Dirty Lips Decoration
This is a multi-colored modern decoration. Printing details: base: 2.0mm total height: 4.0mm every color change: 1.0mm 3 colors needed layer height: 0.2 infill: 25% dimension: 200mmx191mm If you like my uploaded model, please take a look…
P
Printables
Giant Screw Stash Box - Recessed Philips - No Supports
Fits Gift cards and more! Prints with NO SUPPORTS! High capacity secret stash or gift box. Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Want to sell this? → Grab a commercial license on my Club! Only $20/month cancel…
P
Printables
Caliper-Claw brand caliper wall mount for VHB or command strips
i used pla. obviously no supports
P
Printables
Powerfull Bag Clips
Bag clip designed for more powerfull pressure. Enjoy. Layer height 0,15 Infill 15% Perimeters 2 Standard noozle 0,4mm Material Pla Supports No
P
Printables
Cable Holder Clips / Cable Organizer / Cable Management
Cable organizer for 3mm cable like Apple Watch cable or iPhone cable
P
Printables
Skadis Dell WD19 clips
Print 2 of these clips to hold a Dell WD19 series docking station to a Skadis board.
P
Printables
Funko Pop Regal für "tesa Powerstrips"
Ein Regal für verpackte Funko Pop-Figuren. Die Rückseite wurde bearbeitet, um so "tesa Powerstrips" anzubringen.
P
Printables
Holder for Philips Avent Babyphone - Jung LS Frame
Attach your Philips Avent baby monitor video phone without drilling or gluing. Simply clip it behind the switch cover. Suitable for the LS switch program of the manufacturer Jung. Installation in just a few minutes. Easy installation and…
P
Printables
White LED Plastic Ceiling Light Fixed Clips
Mounting Brackets for Lamp Socket Light Fixture Quick fix for broken ceiling light clips. They worked great. These were to fix the clips on an LED kitchen light. They hold the glob with no issues.
P
Printables
Ancient Column For Cotton Pads & Cotton Buds (qtips)
Decorative holder for cotton pads (60mm diameter) and buds. Inspired by ancient roman columns, with a 'broken' top for the ruined look.
P
Printables
Philips Norelco One Blade – Charging with USB-C
Requires soldering a USB-C PD (I used this one at 5V) directly to the battery terminals. The base part will provide additional support. No glue is required. Disassembly starts with crude destruction of the proprietary charging port. Then,…
P
Printables
Creality K2 Plus Bowden Tube Clips
Hi, I have developed new PTFE clips for the K2 Plus and have also modified my K1 bowden clips to be compatible with the K2 Plus. Currently, there are two designs available: one replicates the original factory K2 Plus clips, while the…
P
Printables
Saeco Xsmall Brew Group Latch X-Small Philips HD8645
Simple latch to hold the brew group in place for Philips Saeco HD8645 Xsmall super-automatic espresso maker. The housing of the HD8645 Xsmall is fairly flexible and allows the brew group to move around enough to push the puck bin out of…
P
Printables
Not ZINGO AAC chips
chips compatible with ZINGO to support AAC learners who use Symbol Stix
P
Printables
Double Pipe clip - Conduit Clips - Ø 16 / 20 / 25 / 32 / 40mm - Clips Fissatubo Aperto Doppio
Pipe clip Ø 16 / 20 / 25 / 32 / 40mm, Double - Clips Fissatubo Aperto Doppio For fast installation of RNC, flexible & rigid conduit Suitable for: x2 Ø 16mm x2 Ø 20mm x2 Ø 25mm x2 Ø 32mm x2 Ø 40mm Resize to adjust dimension All our designs…
P
Printables
Bowden tophat clips
Print with supports on but in the same orientation as the original file like a U. bowden is slightly angled down to help the filament path. Each clip holds 4 tube's i have a ercf with 8 gates but can be used for the 4 and 12 gate just add…
P
Printables
Prusa Spool Clips UPDATE
2 types of Spool Clips, 1 for normal spools like Hatchbox and another for narrower spools like Amazon
P
Printables
Kato Unitrack Rail Clips
KATO Unitrack Rail Clips. To secure the rails to the building plate without glueing the rails themselves Printing I printed with PLA, 0.2 mm layer height. Assembly Slide the clips under the rails. Use glue under the clip or screw the…
P
Printables
Philips fabric shaver / lint shaver cover
Our dog got his teeth on the plastic cover for the fabric shaver so I modelled a new one. You can get away printing it without supports if you print it standing up (as shown in the screenshot). I printed it in transparent PLA to see when…
P
Printables
Philips LatteGo Coffee Chute Extender Funnel
Philips LatteGo Chute Extender Funnel The wife loves to drink her decaffeinated coffee in the afternoon and would ALWAYS spill some coffee grounds around the chute. This extender funnel aims to solve that.
P
Printables
TPU protection for Philips Ambilight TV remote control series 6 and 7
TPU protection for Philips Ambilight TV remote control series 6 and 7
P
Printables
Philips DiamondClean Sonicare - HX939V - Travel Case
A very small remix made to fit the Phillips Sonicare DiamondClean HX939V. The fit is quite good though there's a little bit of play with respect to height. If you wanted a tighter fit you can likely get away with an inner height of 190 to…
P
Printables
Network Rack Cable Clips
Clips designed to help organize cables in server racks. Available with both horizontal and vertical guides. Each clip only uses about 2g of filament even with supports.
P
Printables
URBI splited for V0 print size with closed led strips wire channels with ecas fitting
remix of the previous version closed off the cable channel more and added an ECAS option + tried making it editable again for the connecting hexagon refer to the original
P
Printables
Seed germinator - 10 stips
Used to germinate 10 different sorts of eg. hot chilli peppers at once. When they grow enough, then they shall be distributed to separate pots. After the frame is removed, the strips allow easy separation of the seedlings, see the last…
P
Printables
Microphone Stand Cable Clips
I created a variety of sizes of mic stand cable clips. Why pay over a dollar each from the store when you can print them for pennies a piece! Tips: Print all of the sizes at first, then test them out to determine which sizes fit your…
P
Printables
Eurorack Cable Clips
I have a habit of using long cables that I route off the side of the case and then back in so I can bundle them up in the gaps between rows. When I was just using my single case laying flat, the cables would just stay there, but I…
P
Printables
Aufbewahrungsbox für rechteckige Fahrchips
Die Fahrchips Box ist für die rechteckigen gedacht. Standardgröße: Das könnt ihr auch in jeder Farbe drucken. Viel Spaß beim Drucken
P
Printables
Sovol SV08 External Corner Clips
To help tidy wiring for external monitors etc on the SV08. This clip simply snaps onto any of the corner pillars and has various sized wire clips that can be attached. Upto two sizes of wires can be attached to each clip. Alternatively…
P
Printables
USPSA/IPSC Target Stand
Target Stand for USPSA/IPSC/PCSL/IDPA Target stand for 1in x 2in sticks and split in two pieces to fit on the X1/P1 build plate. If using outside, it is recommended to print in PETG. The two pieces are held together with two wedges…
P
Printables
1GB Plymouth Laser/ Eagle Talon/ Mitsubishi eclipse Side marker light clip MB596509
1GB Plymouth Laser/ Eagle Talon/ Mitsubishi eclipse Side marker light clip MB596509. I recommend printing on resin printer. Might need some sanding. It is exact copy of original.
P
Printables
Philips OneBlade - Multigroom - Accessories Stand
One place each for OneBlade and Multigroom series shaver Added a couple of places for most used accessories like nose and body trimmer Long tray for all other accessories Toothbrush and toothpaste tray Trays are a little bigger than…
P
Printables
Philips Monitor Stand
The stand design compatible with Philips monitors is made using wall-mounting threads. It is compatible if your monitor has thread spacing of 100x100mm both vertically and horizontally. Edit: The monitor tray and base have been revised to…
P
Printables
Paper clips
Interesting articles about 3d printing: https://www.matterhackers.com/topic/how-to?aff=7676
P
Printables
Lotus - Passenger Airbag Clips (replacement for # B121U0117F )
If you are here you probably know what this is. Since the original parts ( # B121U0117F ) are quite expensive, and are designed to break every time you have do open up your dash, I designed these ones that you dont need to break in order…
P
Printables
TPU-Gießformen für Raysin/Gips-Osterhäschen
TPU-Gießformen für Raysin/Gips-Osterhäschen " Ist doch nur Plasik " - für alle die dies auch immer wieder zu hören bekommen hab ich hier was. TPU-Gießformen zur Herstellung von Raysin/Gips-Häschen, zur Deko für Zuhause oder auch als…
P
Printables
printable clips for "screw together gridfinity base plates"
for https://www.printables.com/model/300603-gridfinity-screw-together-baseplate
P
Printables
Voron Ascot aka Top hat. All the umbilical height in the right places. Now with updated front corner clips.
This is a top hat for a Voron Trident 300 that I'm calling an Ascot because of the jaunty angle ;-) . This gives extra height for an umbilical setup in the rear yet allows a complete unobstructed view into the chamber while standing in…
P
Printables
Star Trek TNG Isolinear Chips
This optical data chip uses color swapping to achieve multi-color, done with a single extruder printer by automatically pausing at a layer, manually changing filament, and resuming. Check your slicer for this feature. Update log October…
P
Printables
K-PEDC Mtn. Bike Pedals - Toe Clip Adapters for 1/2 or Full Toe Clips
I am continuing to try out different platform/flat mountain bike pedals that can accept toe clips (with or without modifications or adapters). The K-PEDC mountain/BMX pedals look like they might work out. Of course, they do need adapter…
P
Printables
Star Trek: Online Rank Pips
Here are my version of the Officer and Admiralty rank pips from Star Trek: Online Uses 6x2mm magnets and the back plates. Filaments used: Bambu Labs - Basic Silver, Black, Bronze and White.
P
Printables
8mm Bar Clips
These clips are made to snap onto an 8mm bar. 40mm long. Please feel free to rate and review.
P
Printables
Harness Grips for Schroth 2" Wide Racing Harnesses
A brim is recommended for adhesion. Designed for printing with PETG. Due to the locking caps, please note that removal from the harness will break the clips off and they will need to be printed again if removed.
P
Printables
Cable Organizers for 15mm Extrusions – Snap Fit Clips for Clean Wiring
Keep your cables neat and secure with these snap-fit cable organizers designed specifically for 15mm aluminum extrusions . Ideal for 3D printer frames, CNC machines, or DIY rigs using small-format aluminum profiles. These clips help route…
P
Printables
PHILIPS OneBlade drying stand
Simple drying stand for the PHILIPS OneBlade and a razor blade. There are two versions, the first one is a bit small. The second version is thicker and more rigid. Best printed sideways and with a brim.
P
Printables
Gator/Boss Amp Stand Cable Clips
I have a Gator amp stand that holds up my Line 6 Powercab 212 Plus, and I don't like cables hanging down or looking at a mess of wire (at least, no more than I have to. And I worry about a cable being tripped on and my amp tipping over. I…
P
Printables
Philips Sonicare Teethbrush Stand
EN : With reference to my remix of the great model by Wollel I had the idea of reworking this remix for some time, as the plate could benefit from some additional stability in the long term. The competition brought this idea back to my…
P
Printables
Philips One Blade minimalist holder
A simple, fast and easy to print holder for your Philips One Blade. The less material you use the more sustainable it will be. My design principle for use in wet rooms is, to create parts that allow water to drain away unhindered to avoid…
P
Printables
Golf Poker Chips
Basic premise is that alongside a round of golf with friends you play a side game of golf poker. Prior to the round start you set a price per chip, £1 for example There are 7 Chips and they are given to the last golfer to achieve the…
P
Printables
PHILIPS OneBlade Razor - Minimalistic Travel Case
PHILIPS One Blade Razor - Minimalistic Travel Case Reason for Model - The reason for the model was for a simple OneBlade case that only carries what I need a OneBlade with a guard for traveling. Features Cap Holder - For keeping your…
P
Printables
Cable Clips for 2020 Aluminum Extrusion (Twist-in, Parametric)
I tested a bunch of cable clips and the model I found at https://www.thingiverse.com/thing:2613532 was my favorite. It requires some force (pliers help) to twist into place, but once there it holds firm. It's got a flexible arm so cables…
P
Printables
Philips Multigroom 7000 OnePlate Satisfying Clip-On Easy Access Wall Mounted Accessories
Optimized for FDM 3D printing with no supports needed! After many, many iterations (like 5-6 for each clip type), I managed to create minimalistic clips that can hold all of the blade guards in this Multigroom 7000 kit, and likely other…
P
Printables
One-handed easy switch racks for Philips Multigroom
Allows you to easily switch guards with one hand, when your other hand is not free. Designed for Philips Multigroom guards. There's a slight learning curve, but it's easy after you do it a couple times. To detach a guard, slide it down…
P
Printables
Reinforced split version of Phillips Norelco 3000 holder
Phillips Norelco 3000 holder with reinforcement and split into two interlocking pieces for printing flat
P
Printables
Cover for Knipex Electronic Super Knips 78 71 125
This is a remix of protective covers designed specifically for the Knipex Electronic Super Knips 78 71 125 – perfect for keeping those precision tips safe in your toolbox or on your bench. The design is based on the original cover by…
P
Printables
Lipstick Stand
Lipstick stand, can be used vertically or horizontally according to the available space, easy to print, color can be changed at desired layer.
P
Printables
Philips Fixables | Hair Clipper Comb 7-24 mm
Philips Fixables. 3D printed parts for fresh starts. Need a new comb to fit your Philips Hair Clipper? Print yours now. Simply click it on & clip your hair with precision. About Philips Fixables Fixables is a collection of 3D printable…
P
Printables
Vertical Tail FPV Pod for Eclipson Hushwing
Designed for Eclipson Hushwing , but should fit many similarly sized models. Fits Caddx Ant Nano camera, HGLRC Zeus Nano FPV transmitter and maximum 4.5 mm diameter antenna for cheap (~$35) and lightweight (~10 g) FPV setup. The camera is…
P
Printables
Philips Norelco 9000 series shaver wall mount
Wall mount for Philips Norelco 9000 series shaver (just add one screw). Can be printed without supports in upright position (not upside down). Brim might be required if you have adhesion issues (I printed it without brim). STEP file and…
P
Printables
Universal thumbstick extension grips (Xbox/Playstation/Nintendo switch)
inspired by SCUF Thumbstick grips and designed to fit controllers for Xbox One, Xbox Series, Playstation 5, and Nintendo Switch Pro Controller (not joycons) No glue is required, but it is recommended Print cap in TPU Support only for…
P
Printables
Clip fix for Compact Case 2 for Philips OneBlade – Slim Edition
Just a fix for the closing clip/latch. It inserts into the first part of the spring. I had to file down mine, it didn't fit for the first time. I used i bit of hotglue, because i filed it down a bit too much, but i think press fit is just…
P
Printables
Philips Bodygroom Series 3000/5000 Compact Stand
I couldn’t find any free model that fit perfectly, so I made this one. Prefer “ .step ” over " .stl " for higher resolution. Very easy to print.
P
Printables
Perfect solar eclipse moon - HueForge
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 170x170mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.56mm and the Actual…
P
Printables
Philips one blade stand
stand for the razor and accessories feel free to remix it for other one blade versions
P
Printables
Lego Compatible (95351.dat) Minifig Hips Mermaid Tail Sitting
This model is compatible with the lego system.
P
Printables
ROG ALLY Z1 / Z1E Grips
edit: Just added 2 “angle” files which increase the angle back by 7.5 and 10 degrees. I feel this is better than the straight vertical ones I had before but I have left the vertical ones just in case someone else prefers them. I took the…
P
Printables
Screw drivers stand- For Hex, Philips and Slotted Screwdrivers
This stand is designed for storage of precision screwdrivers. The construction ensures stability and easy access to tools. Especially designed for Hex, Philips and Slotted screwdrivers Each holder 1329-2.1 and 2.2 should be tapped on…
P
Printables
Philips Series 7000 Cleaning Station Shaving Brush Attachment
I made an attachment for my shaving brush that friction fits onto the Philips Series 7000 shaver cleaning station. The mount only model is there in case your shaving brush doesn't fit into the slot that mine does.
P
Printables
Poker/Blackjack Chips
My 25 Chip holder - https://www.printables.com/model/1422966-chip-holder Chip Tower holder for 15 chips - https://www.printables.com/model/1423032-chip-tower-holder Recommend printing as many chips, as many are in the gcodes, but it's on…
P
Printables
Life Bar (32 pips) Parts Storage and Display for Kotobukiya Rockman Zero Models (Ver 1.0)
Summary This is a storage box used to store all the extra parts your Kotobukiya Rockman Zero kit comes with. It doubles as a life bar effects piece that can be displayed along side your model. Options The box is a fully upgraded “32 pip”…
P
Printables
Klipsch Speaker Mount
This is my personal design for the Klipsch R-41M speaker. After an exhausting search of the web and not finding anything to my liking I decided to make it myself. I wanted something that would be strong, hide the wires and minimalist in…
P
Printables
monolith annex clips (5mm spacing)
my rear panel kept popping off so i modified the annex corner clips to be the correct spacing for monolith these are a tight fit and will compress the foam slightly. print 4/4/4 40% infill
P
Printables
USA SERVICEMEMBER HAT CLIPS, NO AMS
My popular hat clip design but themed as a gift for USA serviceman and women. NO AMS NEEDED. For single color printers add a pause at layer 45 for text color change. Fits any ball cap hat. Supports are required; I use tree supports with…
P
Printables
Philips Hue Bridge Bracket v2
This is a smaller version of the original design that uses less plastic. It features: tight friction fit for the bridge ability to mount the bridge without disconnecting wires does not block access to the button and LEDs screw holes for…
P
Printables
Philips Hue Bridge / Pro Wall Mount Damage Free Hub
Safely wall mount Philips Hue Bridge and Philips Hue Bridge Pro hubs using command strips. Includes versions with two holes 40mm apart. Edit: Added Bridge Pro Command Strip and Skadis versions. Print as pictured. No supports needed. 5…
P
Printables
HAT CLIPS 50 STATES COLLEGE TEAMS USA, NO AMS
50 states of the United States of America on my hat clip design. Supports are required; I use tree supports with no issues, and .04 nozzle. Theme with your state's colors, team or whatever you want. Print with the text up. For single…
P
Printables
Gripstrength Game print in place
I primarily designed it as a fun game, but its also a fun large print i havent come to print yet. It should take around 200 to 250 gramms of filament and it fits on a 220x220 mm printbed. I am goin to print with 3 walls, 3 top and bottom…
P
Printables
Three brush holder for the Phillips Sonicare 3100 Charger Stand by ZRNNN
This is a three brush holder for the Phillips Sonicare 3100 Charger Stand by ZRNNN
P
Printables
Volume Lever Philips NMS-1515 (D6450)
3D printing settings: Printer Used: Anycubic Kobra S1 Combo Filament: Anycubic PLA+ Color: Black Sparse infill density: 50% Skirt Loops: 2 Layer Height: 0.16mm Nozzle Diameter: 0.4mm Preset: 0.16mm HQ Ironing: All top surface Support:…
P
Printables
phillips aquatouch mount
simple wall mount for the phillips aquatouch electric shaver. double sided tape works great with this model. no supports required. please, share it if you print it!
P
Printables
Proxxon PS13 replacement sanding tips, straight, 45 and 90 degree
Print laying flat using supports for best strength along the tool, see example slicer picture. Printed in PETG, 4+ Walls.
P
Printables
Longboard Wall Mount(command strips)
This is a drop through long board wall that works with command strips. You should print two, one for the bottom and one for the top. When attaching to your wall make sure long board is resting on both the top and bottom mounts to ensure…