Counting matching models…
This is a straightforward, support-free patch panel model offered in 10-port and 12-port variants. Designed for easy 3D printing at a 0.2 mm layer height. With a width of 254 mm, it fits diagonally on a Mk3 printer and fits larger…
I use 2x of these rails (note: some heatsinks make have issues with this, you should be able to drill in to give the screws/nuts more space, a redesign is in order but CPU placement isn't super standard across boards/gens so you could…
This is a straightforward, support-free patch panel model offered in 6-port and 5-port variants. Designed for easy 3D printing at a 0.2 mm layer height. With a width of 152 mm, it fits on a Mk4 printer. Model created using Onshape: Link…
I have two pi 5's on my pi server rack and both of them have the poe+ and nvme hat. This hat adds a challenge that it is just as long as the pi PCB itself and sits very high which required heavy remixing. I recommend longer screws to be…
A compact, 3D-printed NAS enclosure designed for a 10-inch mini rack. It houses an Odroid H4+ (or H4 ultra) motherboard and supports up to 4 3.5 inch drives. The design prioritizes scalability, easy maintenance, and efficient cooling.…
This is my personal project of modular rack designed around Raspberry Pi 4. The rack comes with blades for: 5V/14A power supply Universal Raspberry Pi holder (works for RPis 2/3/4) USB 3-SATA converter 1 Gbit ethernet switch Beside these…
This is a case system for Raspberry Pis (or same-size SBCs) that I've designed because I wanted to use a Pi case system with the following features: Entirely 3D-printable. No additional parts or purchase necessary! Expandable! Make as…
This is a 10" Rackmount panel designed to hold two 3.5" HDDs. The design consists of a main front panel and separate mounting "beams" for each drive for easier print. Key Features: Modular Front Panel: Choose between a Solid version for a…
Added some clearance in one of the racks as I found it to be too tight, even with a well tuned printer.
I've made this to suit my particular needs to also hold my callipers. The Screwdriver inserts are interchangeable and there are a few available with different diameter holes in them. I've also included a Blank if someone wants to…
This is a simple, support-free bracket for mounting a network switch in a mini rack. Easy to 3D print at 0.2 mm layer height, it fits most standard printers and keeps your setup neat and secure. Switch dimensions are 160x35mm. Model…
This is a little rack I made to house my network equipment. Trays are obviously specific to my use case. Mounting hardware are m3 screws and nuts, I used 8 and 10mm length screws. Nuts are inserted with a hot soldering iron, if I make a…
PiRack Bay for 128x64 OLED screens Expanding on rustlerustle's PiRack design, I've created a Bay that utilizes the 128x64 OLED screen. Notes Currently only for the raspberry pi 4, but will upload a version for the 3 soon. It's a tight fit…
This modular rack system is designed for users who need a flexible, sturdy, and clean housing for their networking gear, lab equipment, or home server components. By combining 3D printed vertical segments with standard 2020 aluminum…
Keystone panel for 12inch mini bay
Work in progress: Customized mini rack for Raspberry pi and small devices. Mainly to clean up my work area. Built on 300mm 2020 extrusion. Removable sides for cable management. Slack holes for forgiving tolerances. 120mm Fan but plenty of…
This project is a completely new 3D model of a modular panel for 10-inch racks. While functionally inspired by and fully compatible with the system created by Yury Komarov , this is not a remix of his files. I have modeled every part from…
Wanted to use some model 3A+'s in a pi cluster I was setting up using RustleRustle's PiRack system. This is my attempt to modify the case to close off the back IO panel since the A+ doesn't need it.
Elastyczny brelok w obudowie szkieletu w pirata. Zachęcam do polubienia projektu i dodania opinii :) Projekt ma automatycznie nadane kolory w pliku 3mf jeśli drukujesz w innym kolorów musisz nadać sam w slicerze
Ubiquity 210W Charger + Lenovo M920 charger minirack holder. I printed it in PLA+ but ideally it should be printed in something with better temperature resistance. It holds the Ubiquity 210W Adapter and the Lenovo Thinkcenter M920 power…
This is ears for the IcyDock Express Cage https://global.icydock.com/product_360.html to mount it in a 10" mini rack. You'll need to print two of them, they were designed so that they can flipped and used on either side of the dock.
Para este mini rack hice piezas para que se vira organizados lo cables basicamente no tener amontonadero y se ve mas pro
More info here
This is the 4u minirack. I will keep this description short. Use the CAD file, where the model is fully assembled, to build it. You will need #10-32 screws to build it, which I got from my disassembled Ender 3. To mount the pis in the…
This is the upgraded version of my previous switch panel https://www.printables.com/model/1887973 It uses a cheap yet very compact switch from Aliexpress…
Adds chamfers and tighter tolerances
This is a simple, support-free bracket for mounting a network switch in a mini rack. Easy to 3D print at 0.2 mm layer height, it fits most standard printers and keeps your setup neat and secure. Switch dimensions are 160x35mm. Model…
25.12.25 - Update: Added panel for UniFi Flex Mini Rack 10 24.12.25 - Update: Added Shelf for Mini Rack 18.12.25 - Update: Added panel for Mikrotik RB5009UG 2.11.25 - Update: Added new component models for the Mini Rack : Top, bottom, and…
25.12.25 - Update: Added panel for UniFi Flex Mini Rack 10 24.12.25 - Update: Added Shelf for Mini Rack 18.12.25 - Update: Added panel for Mikrotik RB5009UG 2.11.25 - Update: Added new component models for the Mini Rack : Top, bottom, and…
