Counting matching models…
I took the wonderful card tray that tjdesgin made and extended everything above the base by 25mm to fit all of the Uno - Show'em No Mercy and the expansion's cards. I cut the model just above the base (where the cards sit) and stretched…
Angled card tray for easy draw, with standing discard for minimal table presence. Fits standard magic the gathering sized cards, sleeved. Discard even fits 60 card mtg card boxes, so you can discard right back into the box easily.…
DISCARD OPTIMISM ALL BEINGS WHO PROCEED, sign Category: Signs & Logos
DISCARD OPTIMISM ALL BEINGS WHO PROCEED, sign Category: Signs & Logos
WARNING! - NO TRESPASSING! IT'S JUST YOU AND WHATEVER HUMAN-LIZARD HYBRIDS THE GENETICS LAB DISCARDED HERE, sign Category: Signs & Logos
Objects included are just the basic shapes, adjust height to your desired size, then print as a box with the following parameters: 4 walls 0 top layers 4 bottom layers 0% infill
Master shower drain hair catch. Made this one based on some other ideas I've seen around. It's made to print without any supports, and catch hair inside. When getting full, just print another and toss this one in the garbage. We had…
This is a Draw/Discard Card Tray for playing card games such as UNO, Rummy, etc. It's tall enough to hold two decks of cards, even if they're a bit old and ‘fluffy’. It printed successfully on my first try using PLA, no supports / brims,…
Exact Cards Used In Deck Holder - https://amzn.to/42tVK2C I do receive a small commission if you decide to purchase through this link I created this deck holder for games that require multiple decks like hand and foot, or uno. You can use…
I designed this to sit securely under the depriming station of the press but still be out of the way. Easily holds 100+ primers to keep your area clean and clear.
Creality K2plus waste discard container Remix: Used spring from https://www.thingiverse.com/thing:46749 As is: Used hinge as is from https://www.thingiverse.com/thing:2931045
Created for Mankind Fallout 2.0 or another board game with big deck of cards Print Settings Printer: Flyingbear Ghost 5 Rafts: Doesn't Matter **Supports:** No Infill: 20 **Filament:** Bestfilament PETG Category: Hobby
A gridfinity bin for a Fiscars Pro. It is a low as it can get. It fits in my drawer with 1mm left :-)
Draw Pile / Dispard Pile holder for cards of “Medium” standard size (57x89mm) sleeved. For Earth for example we use 2 stacks on both sides of the table. If you have a multicolour printer (I have a Bambu P1S with AMS) it is very easy to…
I wanted a nice organizer for the discarded truck to hold the cards from spilling over while we continued through the market phases! I may need to invest in the playmat to really tie all these pieces together for the theme. Nothing super…
CHANGES FROM ORIGINAL: Added 16mm, 24mm, & 32mm Menlu Strip Feeders. Updated all feeders to work with EIC-481-C standard max component heights. STEP FILE instead of STL Update 8/4/2025: Added top camera compatible Menlu-EH (extra high &…
Here's a discard bucket with a servo-powered, twin-media brush for your Ender 3 NG v1.2! The bucket brushes are powered by a 270-degree micro servo, and a gcode macro lets you pick which brush to use (silicone or brass), and how many…
When you are dealing with a lot of cards, it can get messy. Use this holder to keep things organized.
With this replacement for the original foot part of the Fiscars pruning stick you can much more comfortably pull your pruning stick against your body (hip or breast) when pulling hard in large height for cutting branches. The original…
This is a simple model for a card deck case. It can be held together by friction, or an additional rubber band and will protect the cards within. When separated, the two halves can double as Draw and Discard pile holders. I've included…
I really liked this design from gatapass but I wasn't a fan of the sharp points and thick base. https://www.thingiverse.com/thing:4239021 Here is a version I made in the same basic style but with liberal use of rounded corners. Category:…
I took the wonderful card tray that tjdesgin made and extended everything above the base by 25mm to fit all of the Uno - Show'em No Mercy and the expansion's cards. I cut the model just above the base (where the cards sit) and stretched…
Are you tired of constantly gathering up the pick-up or discard piles of cards while playing your favourite game? This holder uses a bit of gravity to give you a neat stack from which to take or place cards and keep them together during…
Parameter Value Filament Elegoo Rapid PETG Infill 10% rectilinear Layer height 0.20mm Support None
Made these for the print and play version of Secret Hitler. I made them to fit my cards with a little bit for wiggle room, you may need to scale them larger if your cards don't fit. I may later update this to get the font to match the one…
I play UNO and Five Crown via Tabletop Simulator. When I play IRL with friends and family, it is tedious to deal and shuffle. Especially Five Crowns. My spouse came across the ShuffleBox G1 PRO 2025 and I purchased one immediately.…
Keep your Skip-Bo setup neat and easy to manage with this purpose-built card organizer. Designed for gameplay, it includes clearly defined spaces for the key player piles: 4 Discard Piles – where you place cards from your hand during play…
A compact version of the Skip-Bo card organizer, designed to fit smaller 3D printer beds (180×180mm), such as the Bambu Lab A1 Mini. It keeps your play area tidy while maintaining full functionality, with dedicated spaces for: 1 Stock…
Valéry René Marie Georges Giscard d'Estaing Buste Français Ce buste imprimé en 3D représente Valéry René Marie Georges Giscard d’Estaing , inspiré de la photographie la plus populaire et emblématique du personnage , celle qui a marqué son…
No need to reorient the part when printing except Z rod holder. Other parts can is identical to original version. Pro tips STEP files can be directly import in most slicer and in this case also have much higher quality than my stl files…
An accessory for the Opulo LumenPnP, this little bin magnetically attaches to the front edge of your staging plate to catch any parts Lumen decides to discard. The part is designed to press-fit “8x3mm”-nominal round magnets, but the parts…
Just click into the hole in the drip tray grid. Sizes dialed in for polycarbonate
Rail-mounted tool holder for the Lumen PnP, for a more rigid mount than the original plate-mounted model. Includes a removable component discard cup.
This is a remix of "Hermes_aile"'s "Deck and Discard Pile Holder Folding" card holder for Firefly The Game and other games that use the same card size. https://www.thingiverse.com/thing:759978 It is designed to be a print in place model.…
This is a simple little deck holder I designed to fit the cards for simple card games. My sons love playing Uno and the deck kept falling over. All the card holders I could find were made for Bicycle playing cards and were far too big and…
I liked the design of the side by side draw and discard holder, but wanted a larger one for Marvel Champions. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Category: Games
Based off the M1A1-2 Abrams' 120mm main guns' APFSDS. 3 pieces lock onto an M12 threaded rod and will discard when sufficient airflow has been reached. A lacky band on the rear is needed, one in the middle may also be used. Designed to…
Discard piles can be a pain when the cards are sleeved and you start stacking more than 50 at a time. So, this is a simple wooden box-shaped card tray suitably themed for games like Everdell and Wingspan. They fit American Standard card…
I wanted a deck holder that let me take the full deck with easy for shuffling, as the rest of models in internet have the back in full.
Designed so that you can toss the cards and they will sort them selves out.
This model prints in about 8 hours on .2mm layer height. The bottom and sides are 1mm thick and somewhat flexible. I've included my gcode files, but you should use your own since you may have different filament and printer settings than I…
Remix made by myself to learn Blender Work in progress, I'll add modifications and pictures as the Project continue It's a dealer shoe to play poker, Uno and others games. I added a discard tray that fix to the top of the dealer Shoe with…
Simple design, but the lettering is a little tight so I'd avoid placing supports there if you can.
A circular discard cup that fits in the staging plate center holes.
Inspired by https://www.thingiverse.com/thing:2865645 y wanted to have a deck holder for standard size cards. I did a version in one piece and another splitted to use with magnets. Print instructions It's printed quiet good with default…
An accessory for the Opulo LumenPnP, this bin for discarded components can be press-fitted to the front edge of the staging plate.
3D models for the central deck. While the wonders have their own deck box, the central cards are let as is in the center of the game, which can rapidly become a mess with a lot of players. These models, for both drawing and discarding…
A pretty close recreation of some of the popular Amazon poker gadgets that you can just download and print. I personally bought these items and decided to model and recreate them so anyone can just print them instead. Included is a custom…
This is a collapsible version of a combined Action Deck and Discard Pile for the boardgame The 7th Continent . It's a very trivial print because you print all the sides flat and then slide them together. The only thing is to have the…
When you play card games the discard eventually becomes a pile of mess,To stop this I made the DISCARD STACKER Print Instructions Print the logo facing the bed for multicolour UPDATE •Added V2 •NEW DESIGN!!! : Prints faster and easier…
This is a very simple box with a click lock mechanism that holds the two parts together. When separated they may be used as a draw and discard card trays. Just print the model twice. All dimensions may be adjusted in the FreeCAD stl file.…
Simple discard bin which is held in place by latching onto the screws used to mount the bottom camera. The bin only goes around the screws and can be easily removed without any tools.
Ein einfacher Kartendeckhalter inkl. vertikalem Ablagestapel für klassische Sammelkartenspiele (wie bspw. Magic The Gathering, Pokémon oder Lorcana) im Quer- oder Längsformat. Der Halter ist für Kartendecks mit 60-70 Karten (Stapelhöhe…
This model is inspired by many other card trays, draw/discard models available. Combining the following properties Two places to put a pile of Uno cards (draw/discard) Good view on the piles from all angles around the table Self aligning…
Each slot in the card holder will hold approximately 65 sleeved poker sized cards. Main intent is to use with Firefly - The Game. The holders will hook together at the ends. I printed with .4mm bottom layer, and .2mm layers. To snap the…
Each slot in the card holder will hold approximately 65 sleeved poker sized cards. Main intent is to use with Firefly - The Game. The holders will hook together at the ends. I printed with .4mm bottom layer, and .2mm layers. To snap the…
Double card tray for Zombicide You can have equipment cards and zombies spawn cards side by side. My cards are not sleeved, but I think sleeved cards can fit (see photo with ruler). There is also a discard area for each, where I stock…
Angled card tray for easy draw, with standing discard for minimal table presence. Fits standard magic the gathering sized cards, sleeved. Discard even fits 60 card mtg card boxes, so you can discard right back into the box easily.…
Double card tray for Zombicide, for sleeved cards (higher and deeper than my previous one, where sleeved cards didn't fit in height. You can have equipment cards and zombies spawn cards side by side. There is also a discard area for each,…
Pressfit bin for the lumenpnp machine
Made to hold Arkham Horror LCG encounter deck. Fits cards sleeved with Mayday 7077 (66.5mm x 91mm) with a little margin. Inner dimension of box is 74mm x 35mm x 97mm. There are two possible discard trays that fit this box. For either…
