Parametric Card Deck Case (Draw and Discard)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Card Deck case that doubles as a draw and discard pile holder.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 21
- Makes
- 0
- Views
- 161
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple model for a card deck case. It can be held together by friction, or an additional rubber band and will protect the cards within. When separated, the two halves can double as Draw and Discard pile holders.
I've included the FreeCAD project file. When opened, you will find a Spreadsheet item. Double click that item and you can see all of the fields containing the variables, along with some notes. Make your changes, and then select the "cover" and "base" models and then File > Export to save them as an STL file.
Print Settings:
Infill: 15%
Supports: None
Nozzle: 0.4
Layer: 0.25mm SPEED