Counting matching models…
I had bad results (too tight & too small joints) with the other one's tiles grid… made my design. Easily snaps together with big L-shaped joints to grow the board in any direction as necessary. It helps when the board has to be shifted if…
My takes on the Characters, NPCs and Creatures of Dragons of Stormwreck Isle are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of…
I Remixed this using these models : https://www.thingiverse.com/thing:313007 Liverpool LFC Logo by fraser0206 - Thingiverse This is a Liverpool Football Club whistle. I printed it without supports at 0.2mm and 60mm/s and it prints fine,…
CZ: Není můj design! Jediná úprava je moje a to “Player_Board_A”, kde jsem zvětšil díru na karty a odebral tamtéž spodní zábranu, aby se karty dali lehce vytahovat a vešli se dovnitř ve fólii EN: Not my design! I've remixed only the tile…
Well here is another idea of mine that we have been using a lot. This is a frame that sits around the outside of your boats and keeps your cats contained on the boat, we all know how hard it is to contain cats! The frame stops them…
This was just an early draft. Please see my collection here: https://cults3d.com/en/design-collections/RubyxGoodz/gothic-tracery
ES: No pude encontrar un modelo de alfabeto con tipografía para disléxicos así que lo hice. La tipografía se llama OpenDyslexic https://opendyslexic.org/download Las letras aquí tienen unos 50mm de largo y 4mm de espesor EN: I couldn't…
Prelude I stumbled across OpenSCAD while looking at another tile grid design. It was a tool I hadn't come across before and it piqued my curiosity. This first design was intricate and complex and proved to be a steep learning curve. When…
This is a "Common Treasure" Dispenser and Storage Box for the Board Game called The Isle of Cats. The dividers help you keep the treasures in the right numbers for the different number of players playing the game. The lid was printed…
These are a precision (tight) fit. It takes a little effort to get them past the rivets inside the drawer. Frontmost bins are positioned a bit closer when you open the drawer. Model is exactly 235mm wide. (Turn skirt off to fit 235mm…
Isle of Man TT Mountain Course, United Kingdom, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed…
I have created a Gridfinity baseplate that fits into my two Bisley drawer cabinets. The entire grid has a size of 5 x 7. (312 x 235 mm) Theoretically, 5 x 8 would also fit, but then the drawer would have to be removed almost completely to…
Turn your SMILEY into a lookalike historic piece from World War 2. Adds a considerable amount of weight to the front, over 600g of filament, so keep that in mind. Includes mock iron sights and backup iron sights if you do not want the…
Logos for Bessey, Halder, Lisle and Woodpeckers Slice with .20mm QUALITY or SPEED and you shouldn't have any problems. If you need help with inserting color changes into the slicer, let me know and I'll show you how to have PrusaSlicer do…
visle's Scaper Hook didn't fit my MK4. I didn't find any that did so I took the opportunity to get more Fusion360 practice and make my own. As noted in @CrankyKoala_909727’s make, it also fits the newest MK3S+ produced after the release…
Ein Inlay für alle Teile des Grundspiels und der Erweiterungen Wanderer und Druiden. Passend für die deutsche Version von Lookout Spiele (ev. auch für andere Versionen). Das Drucken funktioniert ohne Stützen. Anleitung für das Drucken des…
This functional insert and organizer for the board game "The Isle of Cats Duel" allows for storage of all components and facilitates quick setup and play. It includes a card drawing tray for all cards, treasure tiles trays, fish tile and…
I re-drew the vectors for both single and 5 fish pieces to be able to add multiple layer dimensinoality for multi-color/filament prints. Printing these in 2 colors can be done on any single-extruder 3D printer, not just Bambu Labs AMS or…
Reemplazo de tokens de gato y token de barco para el Juego "La isla de los gatos" no son exactamente iguales que los originales, pero cumplen su función. Replace tokens for "Isle of cats boardgame" they are not exactly the same as the…
i created a holder for my lisle oil funnel #19912 and #19612. has a sports drink cap on the bottom so you can attach a bottle to collect residual oil. i added a bit of RTV to the rim of the bottle after noticing a little bit of a leak…
Uploading a few old designs. If you want to support my work and all of the free designs I bring to the community consider buying something from my Etsy shop or my Printables Store . _______________________________________________________…
Boat frame and treasure tray for the board game The Isle of Cats . The treasure tray is a remix of a thing:4587188 : less tall to only hold 11 tiles of each shape, rounded edges, and I added a lid. The boat frame to hold the cat and…
Mit dieser Anreißlehre kann man bequem ein Maß einstellen und beliebig oft an verschiedenen Stellen identisch Markierungen setzten. Somit kann man Bohrungen exakt gleichmäßig anzeichnen. With this marking gauge, you can easily set a…
If you print from the STL file I suggest changing the filament color as soon as land mass above sea level appears. I've already done this in the gcode attached. The z-axis (height above sea level) is exaggerated otherwise the island looks…
This is a box insert for Isle of Trains: All Aboard designed to keep all the components organised in the box and make setup faster. I remixed majino's insert to modify it in a few ways: The victory point tokens are now stored in their own…
This is a drawer insert for the Bisley 5 drawer steel filing cabinet, designed to hold bobbins of thread for cross stitch or embroidery. The insert is split into two pieces so it can be printed on smaller printers. Each drawer needs one…
This is a Gridfinity baseplate for the Bisley 10-drawer cabinet (specifically, this one) The following design decisions were made: The grid doesn't fit neatly into the drawer sizes, so a margin was added around the edges which I think…
PAISLEY EARS FOR INFINITY HEADBAND This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/17rxLVjVSH9 Post-Printing Sand Pegs for easy fit Dont Force Pegs Sand Them Category: Accessories
Simple box for Carcasonne cards with separator.
This 3D-printed adapter is designed for board game tiles (45x45mm) like Karak, Carcassonne, Isle of Skye, providing a press-fit system for securely holding the tiles in place. It features slots for 8 neodymium magnets (2x2mm) that…
I wanted a box insert for The Isle of Cats: Explore and Draw game, and since none were available yet I decided to learn how to design my own. My insert will accommodate sleeved cards, the sleeves I use measure 65mm X 90mm outside. The…
Pimp your Bisley steel cabinet with a colourful new lock handle and/or cover up a clumsy mistake! Should work for all cabinets with the pictured horizontal lock mechanism. Manufacturer seems to have only the whole assembly as a (fairly…
This bundle of fish is only 1 layer high. It represents the 5 fish bundles from the game. 22 of these will be needed for the base game. Category: Toy & Game Accessories
i created a holder for my lisle coolant funnel #24780 3 5 mm mounting holes i used 3/16 rivets but you will need to use something with a pretty flush head as to not interfere when inserting. may also work with other brands Print Settings…
I wanted to design a cool shape that would be kind of modular. With this design, you can print the three parts as shown, or just print the two paisley shapes and put them in a sort of yin-yang shape, or just print the narrow dish as a…
Custom bin and tray layout for a Bisley drawer unit. With perfectly sized floss card storage and some extra trays. The Bisley doesn't exactly fit the gridfinity layout (but the floss cards did!) so I oversized the parts and chopped them…
I needed a lamp for a re-creation of Chalmun's Cantina from "Star Wars: A New Hope" that I'm building for Halloween. Lamps like these are visible throughout the scene (see photo). So this is what I came up with. It is light weight, can be…
I made this to convince my wife that owning a 3d printer is a win in our house…it kind of worked a bit. I can keep it.
The island model is accurate, based on true altimetry of the island. The original model could be this one (don't remember where I found it). I reduced mesh resolution and scaled along z to make the features more visible.
Isle of Skye organizer that fits both large expansions: Journeyman and Druids, and has room for promo expansions. This is a vase mode print that is lightweight and very fast to make. It works with vertical storage. Print 2x CoinBox, 1x…
Recording Artists - Country - Brad Paisley 3D printable model.
Set of three 2x1 Gridfinity socket trays designed to fit Lisle tap sockets #1-#8 (70500) , #9-#11 (70940) , and #12-#13 (71670) .
The late, great Prince introduced us all to Paisley Park, and this distinctive logo, in 1985. Now you can print it and display it with your Prince record albums or to just show your admiration of his musical genius.
abbey in autun, by gislebertus (c.1120)
Bisley hanging file cabinet bracket for 5x Stanley FatMax FMST1-75779 Shallow Organizer I removed the metal hanging file brackets from the drawer. I printed this model 4 times, per drawer, in ABS and mounted using double sided tape…
Insert for board game Isle of Trains: All Aboard. Fits sleeved cards (UltraPro Deck Protector sleeves), promo tiles and deluxe meeples. Printed on Prusa MINI, 0,25 layer, no supports needed
These are a precision (tight) fit. It takes a little effort to get them past the rivets inside the drawer. Frontmost bins are positioned even closer when you open the drawer. Model is exactly 235mm wide. (Turn skirt off to fit 235mm…
Hey All, my actual first attempt at a board game insert. I made this a while back and I actually forgot about it. I ended up getting fancy with some 5 mm x 1 mm magnets and super glue to hold the lids to the containers. The treasure stack…
This stylized logo for Prince and the Revolution was used on the 1985 album “Around the World in a Day” and compliments the similarly styled Paisley Park logo.
Hi! Have you printed out a bunch of card grids for games like Carcassonne, Karak or Isle of Skye and now you're wondering how to keep them from getting lost? Try printing out this stand for them, which has a screw-on cap so the grids…
Current single aisle aircraft designs are a bit ... well archaic - lets shake them up a bit
Fits Beast + Shattered Isles Expansion without miniatures in one box. I got fed up with having two full boxes and the (imo) horribly designed original inlay, so I made this organizer. Compatibility I own the acrylic token version, and…
After playing this game a few times and experiencing the "joy" of ~20 baggies to play, I decided I had to do something about it. After about two hours of measuring and modeling and measuring and modeling I'd put crafted eight unique parts…
Fregi laterali Panda 4x4 Sisley 100% fedeli agli originali. misure ricavate da fregi originali. ottimizzato per la stampa 3d. i fregi possono essere attaccati alla Panda con del biadesivo forte (tipo VHB) o con del silicone. al momento…
Hier ist aus der Serie Rizzoli and Isles Det. Jane Rizzoli FANART
Simple insert for the Kickstarter version of Isle of Trains: All Aboard - https://boardgamegeek.com/boardgame/355224/isle-trains-all-aboard I put the round tracker tiles in the passengers box. Doesn't fit sleeved cards.
It has a removable bottom for drainage if needed. All parts oriented for printing, no supports needed. Enjoy!
A cap for the Bisley Scope Maximiser Category: Sport & Outdoors
Token holder for treasure and fish tiles in one. (Thank you for the original model!) Printed with PLA, 0.3mm layer height. But most settings will work.
This is a fully custom made insert that allows to fit contents of the boardgame Isle of Cats and all of its expansions (Kittens + Beasts, Boat Pack, Late Arrivals, Kickstarter Pack 1 and Kickstarter Pack 2) into the original box, with the…
Height map of the British Isles made from a greyscale height image from https://tangrams.github.io/heightmapper/ . Model is 60mm x 80mm. To avoid supports I printed at a 15 deg angle, my other parameters were: 0.2mm layer height(scaled to…
The in-tank "Salva" brand fuel filter of a number of classic Lamborghinis (and possibly Ferraris) is utterly NLA, or in the hundreds of dollars. The sensible thing to do when refurbishing a fuel tank is probably to use a modern push-on…
1x4 - Horizontally holds two of Visle's Hex Scrapers
Designed to fit snugly into the Bisley A4 multidrawer* in a 3×3 arrangement, each mini pastel tray can be removed and used as a handheld palette. Each tray holds 9 standard oil pastels and features depressions on each side for easy…
This is somewhat of a storehouse for Bisley drawer organiser designs for jewellers' use. Model 3 is a drawer insert for the 2" drawer that has numerous slots for 5-piece bur cases, a section of 2.35mm slots for individual burs, a longer…
Upgrade your multidrawer with a set of custom-printed durable labels! What's Included bisleylabel_blank: a basic label template bisleylabel_safezone: a label template with a debossed 'safe zone' alignment guide marking the visible portion…
The card holder can stand upright and fits sleeved cards for isle of cats (without the late arrival expansion). The bottom has 4 cutouts for 8mm rubber feet. I also designed boxes that fit 5-6 pieces of each treasure type. I was planning…
Original design was based on Marcel Islers work on the Promega to Shadowmega conversion. His initial design used the original Hemera. I adaptive the design to accommodate the Hemera XS. as the mounting holes and parts cooling fan position…
A folding sign that says clean up on aisle 5! Uses a piece of 1.75mm filament as the pin to connect the two pieces. A small piece of electrical tape on the bottom of the legs gives the sign good grip on the floor. The back of the sign has…
Organizer for Isle of Trains: All Aboard, Ukranian version. I don't know if is this the same box size for other languages. All cards placed in premium sleeves Box size: 133x185 mm Printer: Anycubic Kobra 2 pro Layer height: 0.2 mm No…
This is an insert for the card game Isle of Trains using the board game insert. This will fit in the Isle of Trains box. Print one of each box. Photos show the the layout works inside the box itself. Included 3mf files to make…
Damit mein Modell "Anreiselehre" auch den Weg ins Skadisregal findet, habe ich ihm heute eine eigene Halterung entworfen. So that my “arrival gauge” model also finds its way onto the Skadis shelf, I designed its own holder today.…
2D ornament split into parts with mounting holes and flat pins for easy connection of the individual ornament sections. ZIP folder contains stored in STL 1.X203xY2xZ150 2.X203xY2xZ150 3.X200xY2xZ150 Redistribution of the 3D STL files is…
Part of my National Parks Series of Lithophanes which I will be designing more of as time progresses. I will be donating 50% of the net tips, for this design, to The National Park Foundation (NPF). This lithophane simply slips onto a…
This is a wall mounted isle that can be sized to any length you want. It uses simple and cheap parts easily found in any hardware store with couples of grams of filaments. What you will need : x2 Square aluminium tube 1.5" x 0.75" x2 M12…
Final Aisle - Light inside an enclosure Created with Prusa, the collection treats the emptied spool not as waste, but as a design constraint. Its diameter, perforations, circular rhythm and industrial familiarity become the starting point…
Designed for use with tiny 4mm diameter, 2mm thick circular magnets. OpenSCAD files included, in case you'd like to make modifications.
Uploading a few old designs. If you want to support my work and all of the free designs I bring to the community consider buying something from my Etsy shop or my Printables Store . _______________________________________________________…
This is somewhat of a storehouse for Bisley drawer organiser designs for jewellers' use. Model 3 is a drawer insert for the 2" drawer that has numerous slots for 5-piece bur cases, a section of 2.35mm slots for individual burs, a longer…
Fregi laterali Panda 4x4 Sisley 100% fedeli agli originali. misure ricavate da fregi originali. ottimizzato per la stampa 3d. i fregi possono essere attaccati alla Panda con del biadesivo forte (tipo VHB) o con del silicone. al momento…
Height map of the British Isles made from a greyscale height image from https://tangrams.github.io/heightmapper/ . Model is 60mm x 80mm. To avoid supports I printed at a 15 deg angle, my other parameters were: 0.2mm layer height(scaled to…
I can't get how to print land dispenser and assembly plate during printing without flaw, so I decied to built a new one. You can print with tree support, it should be fine. The model works smoothly with an enlarged slot and finger hole.…
This stylized logo for Prince and the Revolution was used on the 1985 album “Around the World in a Day” and compliments the similarly styled Paisley Park logo.
Designed as a replacement for the paper based labels on the Bisley Multi Drawer.
Made 3d printed tokens for the fish. Just print a bunch and have fun. Print Settings Printer brand: Anycubic Printer: Kobra Max Rafts: No Supports: No
Made from maps adapted from https://touchterrain-beta.geol.iastate.edu/main Printed with Ender 3 Pro with Creality PLA, I recommend using rafting to give the print an ‘edge’.
I will take zero credits for the individual models. All I did was collate what I considered the best and made them consistent in size. Kudos to @JohndeAlmeda_963085 's single fish model and @JasonJennings_385727 's multi-fish model .…
3D printable topographic miniature of Isle of Dogs Capture the beauty of Isle of Dogs 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 51.497, -0.016 (LatLng) . It…
WORK-IN-PROGRESS This is very much a prototype, currently it only has holes for the square nuts needed for the slotted dowel pins, it does not provide proper support to the PCB, as I want to figure out an adjustable way to handle it that…
Holder for bit set as it does not come with a holder. Uses 10mm x 2mm magnets.
3D printable topographic miniature of Carlisle - 🇬🇧 United Kingdom Capture the beauty of Carlisle 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 54.895, -2.936…
3D printable topographic miniature of Douglas - 🇮🇲 Isle of Man Capture the beauty of Douglas 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 54.153, -4.484…
