Counting matching models…
This is a combined MagSafe iPhone and AppleWatch charging Stand that holds the phone horizontally to take advantage of the new StandBy mode in iOS 17. Require glue to keep parts together (superglue is fine). Compatible with all iPhones…
I couldn't find an inconspicuous Apple Watch holder, so I decided to make one. The first one I made was mounted with a small Command Strip to my bedside table, with the cord held closely to the surface of the table to prevent accidentally…
i print this in PLA you can print this with any materiel will need supports when printing i did 25% infill
HeyAll! Hope everyone is staying healthy and well. This is a remix from Chriskkk's great design. I wanted it for myself cause it makes it so much easier/organized (and looks great!) to charge everything on the same place on my nightstand.…
Durant molt de temps he fet servir el fantastic stand d'en Daniel ( @Daniel_130434 ) pero amb l'arribada de iOS 17 volia deixar el Apple Watch pla i donar-li importancia a l'iPhone en horitzontal, aixi que he fet aquest remix.
Remixed from Scott Yu-Jan (ft. Overwerk) dock model. Also watch his fantastic Video: https://www.youtube.com/watch?v=L3n For Resin printing the extraction mechanism is too unreliable as it keeps stuck very often. I removed it and added…
3D printing, a watch like no other here, you will find all the information about the design: https://www.usinages.com/threads/impression-3d-une-montre-pas-comme-les-autres.157098/ 3D printers have been around for the general public for…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Star Trek iPhone/iWatch wireless charging station. No…
Convenient wall mount support for charging your Iwatch. Print instructions Printing position: back face down Rafts: No Supports: Yes Resolution: 1.5mm Infill: 10% Speed : 50m/s Nozzle temperature: 210 Bed temperature: 50…
I organize my nightstand with the help of a honeycomb storage wall. With this model, I can store my watch safely while charging it. print with support print with different material or colors based on the multi material version update…
Print it with 15% infill. Print it in the orientation as shown in the image below and paint the support manually.
This is a bumper to go over the screen, ideally to prevent a screen protector film from pealing up during use. Will work for only a Apple iWatch which is 44mm (iWatch 4 and earlier?)
Ladestation für I Watch und Earpods sowie für zwei USB Geräte USB-A und USB-C. viel Spaß beim drucken. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Supports: No Category: Gadgets
Printing with standard settings for 0.4mm nozzle. No support or brim required. You will need 4 x 6x3mm neodymium magnets and cyanoacrylate glue if you decide to use magnets. 2 x M3x20 screw, nut and washer to attach the camera to the…
Ladestation für I Watch und Earpods sowie für zwei USB Geräte USB-A und USB-C. viel Spaß beim drucken. Print Settings Printer Brand: Creality Printer: Ender 3 Pro **Supports:** No Category: Gadgets
This is an accessory for the Modular Desk Shelf created but Robta on Makerworld. Click Here to see it. This just puts the iwatch in front of me so I don't forget it at my desk.
This works with the chargers that have a metal ring around it. Tested with series 8/9 watches. Not sure if earlier versions of the charger will fit. Should print fine without any supports. I have left some spaces on the interior base if…
This holder is to secure the iWatch charge to the wall PETG no Support 25% infill
Just got a new phone and needed a charging stand. This will hold and charge the phone along with the iWatch at the rear to keep it all neat. in 3 parts and i printed with supports and it came out fine.
I designed this charger stand for my 46mm iWatch 11 that has a titanium wrist band. The cradles I've found had too wide of a top that prevented the charger from nesting to the back of the watch. I applied thin rubber pads on the bottom to…
Set obsahuje 2x stojánek pro telefon a hodinky, podstavec s otvory pro možnost následého sešroubování v případě težšího telefonu / hodinek a problémy s převracením
This is an accessory for the Modular Desk Shelf created but Robta on Makerworld. Click Here to see it. This just puts the iwatch in front of me so I don't forget it at my desk.
This is a bumper to go over the screen, ideally to prevent a screen protector film from pealing up during use. Will work for only a Apple iWatch which is 45mm (iWatch 5 and above?)
This very old model can still be used to charge your 42mm Apple Watch. It was printed successfully using some supports in PETG. The original model has been designed by option8 on Thingiverse. All details are available here :…
I adapted the original iwatch stand from bellwd to my needs and added the excellent G-Clamp model from johann517 to it. For my needs, it was enough to print with 25% infill and 0.2mm resolution from PLA
Case for HumiWatch humidor humidity and temperature sensor. Holds Raspberry Pi Zero, OLED display and 3.5mm jacks for external sensors. I used these DHT22 boxes to hold the sensors. Full details of the project on GitHub . Required…
A very simple iPhone 7 Plus and iWatch stand/charging base for your nightstand. It fits the original Apple iPhone cable and watch charger. Both should be a pretty tight fit and doesn't need glue for either one. There is a guide for the…
This remix is done, because it was too big for my prusa mini+ So i cutted it left and right and in the middle and re-assembled it. All dimensions are the same for watch and mobile except the width of model. btw i use iphone13max with…
This stand allows you to insert the charging cable into the dock and use it to charge your Apple Watch Print instructions Lay the model on the printbed legs up (see second Photo) and support only touching the build plate. The printer I…
Můj držák telefonu a chytrých hodinek s nabíječkou My phone holder and smart watch with charger . I use for iPhone SE 2020 and iWatch3 If you like my model, give it a like
It is a companion for Another MagSafe charger stand for iPhone . Tested on iWatch Ultra. You also need M3 16mm bolt with M3 nylon nut to put it all together.
It is useable for iPhone 15 Pro Max atd. Supports: NO Perimeters: 4
This stand can be mounted under a shelve or a desk. I have it under a shelve on which my monitor stands (above my desk). The mount part can be attached to the shelf either with a double-sided tape or with 2 screws. If you need to use…
