1,113 models
A Christmas Update | V4 is Here! 🎄 12/09/2024 This update marks the final version of my iPhone Standby Dock Remix, and I couldn’t be prouder to share it with you all. Creating this has been a monumental task—I went through and completely…
This 3D model was originally created by Scott Yu-Jan and is shared under the CC BY-NC 4.0 license. You can find the original file on Makerworld: https://makerworld.com/en/models/615378#profileId-538769 License:…
Easy printable pencil holder. Size cca 15 x 15 x 12(height)cm. It can be printed without support, because are used max. 45° angles. Filament need cca 50m (0,2mm, 2 wall loops, 15% infill). Tower inside diameter 49mm. Second models:
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
This REMIX Was made to fit an iPhone 13 pro and an iPhone 14 with a standard case. This may fit other iPhone models, but will need to test it at your own risk. DISCLAIMER: Please be careful when ejecting your iPhone. Always have your…
Travel phone stand, lightweight, foldable. Low filament need(cca 11-13m). Radius (A,B,C,D,E,F) and Edge (G,H,I,J,K,L) versions. Size 130(high)x65(width)x90 (A,B,C,G,H,I) 130X70X90 (D,E,F,J,K,L) Hole for cable 4.9mm. Edge versions…
SIze cca width 152 ( C,F 172) x depth 60 x hight 93mm. Wall depth 3mm. Holes for pencils (C, F) size 17x15,5mm. For papers size 90 x 90mm (use not glued papers). Tested 0,2mm, 2 wall loops, 15% infill. Filament need cca 40-60m. Second…
Organizer Office Compact, easy print without support. Short and Long versions with and without drawer. Size vesion With drawer: Short version lenght x width x height 115 x 103 x 135mm, Long version 155 x 103 x 135mm. Size Without drawer:…
It's not a precise nor detailed model. It has simply 4 parts to show you the basic principle of a Janney coupler. Print in the position I posted. It's basically support-free if you print it small. Will need to add some support with the…
This is design is done by Scott Yu-Jan with OVERWERK. Please check out his video and credit to him for this great design. The difference is this is for iPhone only since I do not have an Apple watch, I have reduced the size for iPhone 12…
This is a remix of https://www.thingiverse.com/thing:1592398 . I wanted an angle finder that did not extend below the protractor so I remixed the above. Added a window on the measuring arm to improve visibility of the angle numbers. I…
🇧🇷 Bem-vindos a Brasil! Welcome to Brazil! Check out the 2025, realistic version of this model . This is one of our very first models, created in 2014 by MiniWorld3D founder & lead 3D artist Dany Sánchez . It is made with considerations…
This 3D model was originally created by Scott Yu-Jan and OVERWERK. You can find the original file on Makerworld: https://makerworld.com/en/models/615378#profileId-538769. This remix of the model was made to fit the iPhone 14 (without…
Easy printable. It can be printed without support. Size big version lenght x width x height 106 x 86 x111mm. Filament need (big version) cca 52m (0,2mm, 2 wall loops, 15% infill). In 4 versions with and without cards holder and in big and…
I NEED YOUR HELP I want to include labels for anything and everything a maker would require! If you have a suggestion for a set of labels, leave a comment or message me, I try to read them every day. Thank you ^^ These labels are just a…
Document file size 25x12x25cm. Firmly holds folders with papers. Printed on Bambulab P1S - 0.28mm layer, 15% infill. Pořadač na dokumenty velikosti 25x12x25cm. Pevně drží složky s papíry. Tisknuto na Bambulab P1S - vrstva 0.28mm, 15%…
Trojan horse , huge hollow wooden horse constructed by the Greeks to gain entrance into Troy during the Trojan War . The horse was built by Epeius, a master carpenter and pugilist. The Greeks, pretending to desert the war, sailed to the…
Janet will do whatever it takes to reach the top! As a bonus, her performing skills come in handy for rescuing her sister Bonnie, whenever she gets into trouble.
Fits iPhone 13 with case and supports lightning cable charger.
Size 125x160x100(height)mm. J, K are inserts for I (F). For insert (B,C,D) you can use brim. Wall depth 3mm. Filament need cca 90-110m (0.2mm, 2 wall loops, 15% infill). First complete parts B(C,D) and E(,F,G,H,I). Other models:
🇦🇿 Welcome to Azerbaijan! This model was designed by Faiz Kamel @churnwalker21 The Heydar Aliyev Center is a 57,500 m2 (619,000 sq ft) building complex in Baku, Azerbaijan designed by Iraqi-British architect Zaha Hadid and noted for its…
Versions for max. phone depth 9, 11, 17, 22, 27mm and max. phone width 70, 75, 82, 86, 90mm. For stops use brim and for completation with extenders watter, when you need use file or glue for hard plastic (UHU, Tamyia…). Use flexible…
This Succulent Planter is inspired by pompeijan architecture. It has a little pool for excess water and an insert sieve to prevent root rot. I added tiny chairs and a tiny table mostly for fun, because they don't print very well. The…
This desktop moving sculpture adds beauty and interest to the daily grind. Based on the ratios of Theo Jansen's Strandbeest creations (http://www.strandbeest.com/), this mechanism is an interactive way of visualizing the motion of a…
A miniature helm with a trojan flair. Fantasy Armor for display or gaming. Tree Supports on build plate only Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This Trojan Horse model was crafted using AI-assisted design, ensuring perfect proportions and finely detailed plank and rivet textures. It prints to a final size of X: 114 mm, Y: 55 mm, Z: 106 mm , making it ideal for desktop displays…
Toto je moje malá Radegast diorama spojující v sobě sochu našeho boha se dvěma stojany pro 8 mých Radegast podtácků . Samotná socha, není můj vlastní model a původní autor je Pavel Sticha - https://www.thingiverse.com/thing:3831760 Není…
Jane Jetson, from the comic strip The Jetsons, by Hanna-Barbera. Jane Jetson is George's wife, mother of their two children, and a homemaker. Jane is obsessed with fashion and new gadgetry. She is a dutiful wife who always tries to make…
New Compact Design, Same Great Taste. Now with 50% Less sugar. (results my very) (also don't actually lick plastic parts… its just unsanitary) ;) ½ x28 Thread Fits .22cal airsoft or bb gun
sexy girl doing yoga in the Cobra pose (Bhujangasana)
Pokud se ti model líbil dej mu like, díkes. If you liked the model, give it a like, thanks.
A helmet that was never included in the Tommy Trojan/Drum Major Lego kit. You'll also wanna print a sword, cuz it didn't have one of those included either! https://www.printables.com/model/248800-tommy-trojan-lego-sword Two files: 1.)…
it's reuplad from https://www.thingiverse.com/thing:625845
A remix of the Every iPhone STL & Adjustable f3d File | ScottYu-Jan & OVERWERK model by @Marlfox_1264389 , but this time with only the phone charger portion. Also adjusted the tolerance of the magsafe portion to be a tight interference…
This is a 3D scan of the statue of the Roman emperor Trajan ( http://en.wikipedia.org/wiki/Trajan ) in the New Carlsberg Glyptotek museum in Copenhagen, Denmark. I found the model here:…
Celkový rozměr 245 * 196 * 120
This is a set of pieces that can be used to recreate the Jango Fett (Balacava Head) mini-fig at 500% scale. This figure is somewhat rare in that it only appeared in one set - Jango Fett's Slave I that was published in 2002 All of the stl…
[FR] Le produit présenté est un support/présentoir. Ce support peut être utilisé pour supporter un téléphone portable ou une tablette tactile ( ~ 3.7" à 10.1"). Il peut également servir de présentoir pour des revues ou des livres……
Adjustment of the storage for the Apple Watch/AirPods charger. Úprava uložení nabíječky pro Apple Watch/AirPods
🇧🇷 Bem-vindo a Brasil! Welcome to Brazil! This model was sculpted by 3D artist Luana Ferreira, no AI. The monumental Christ the Redeemer statue in Rio de Janeiro is one of the most recognizable landmarks in the whole world, becoming a…
ENG Simple stand for RC boats. Designed to fit GoolRC GC002 3D printed 200mm jet boat. Print Instruction & Assembly Printed @ 0.4mm layer, 3 perimeters, & 20% rectilinear. (no support) Prints flat and snaps together for assembly. Glue the…
Při tisku 4ks stojin je potřeba pozastavit tisk a vložit matice M5 - v gcode je to již nastaveno. Budete potřebovat 8ks matice M5 a 8ks šroubů M5x20 While printing 4 peaces of stand, it is necessary to pause printing and insert nut M5 -…
Phone stand, printed on the side layer 0.3, fill 30 percent, without supports added version with different padding Stojan na telefon, tištěno na boku vrstva 0.3, vyplň 30 proc, bez podpor přidána verze s jinou výplní
Celebrating the death of a long-gone hero. Tree Supports on build plate only Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Boże dzieci, kryjcie dupę Papież Polak ma skorupę Przez zabawy z dzieciakami Papież świeci kolorami
My Educational Mechanical Examples Series This model is one of my educational mechanical mechanism examples on 80mm x 80mm base plates. You can find all models in the series in this collection => [Mechanical Mechanism Examples] The…
Walking Roboter
This is Dedicated to one of New Zealands very own Actors whom played a number of Characters in the Star Wars franchise, due to the fact he was cloned ; ) Print instructions Category: 3D Printer Accessories
Cache moyeu pour les jantes en aluminium. La face visible est lisse et on peut facilement coller un logo. Le diamètre extérieur est de 60 mm. Update 04.07.2024 Nouvelle version v4: Les crochets sont légèrement plus épais pour une…
The original file for this suppressor had issues where the inner diameter was too small for a 6mm BB to pass through. This file has a larger inner diameter as well as a larger overall body with support for 14mm CCW threads. This…
Needed something to de-clutter my wife's box of bobbins. Printed this. Janome bobbins will snap nicely into place, but still not be under pressure, so the print works nicely with PLA, ABS and PETG. Print instructions Category:…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Rose with a name (Anna, Jana, Veronika, Vlasta, Petra, Niki, Lucie, Miriam)
Print-in-place tiny figure with removable chin support.
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
DN40 Standby Dock – MagSafe, Apple Watch & Extra Wired Charging Slot Upgrade your nightstand or desk with the DN40 Standby Dock ! This 3D-printed dock is designed for iPhone Standby Mode , MagSafe charging, and Apple Watch, plus it…
Arachnobeest A lightweight, easy-to-print walking octopod robot based on Jansen linkages. With just a handful of bolts the entire robot can be built and controlled with parts in the standard XRP robotics kit. Assembly In Progress Control…
Filament need cca models A ,D…20m, B,C, E, F…10m. Hole diameter 46 (A,B,C) 51 (D,E,F), 43(G,H,I) mm. Size A models cca 120x120x45mm.
This is a low resolution (!) model of Jan Žižka monument in Vítkov. It's done via Meshroom and edited in blender, so unfortunately, some details are still missing, like horse reins.
PLA /PETG výpln = 0% výška vrstvy = 0,2 mm trysky = 0,4 mm perimetry = 3 horní vrstvy = 0 spodní vrstvy = 6
I made this model from scratch since I was not able to modify Scotts files in fusion to have it work with my phone and case (not good at fusion) so I studied his design and replicated its aesthetics in OnShape. The phone cutout dimensions…
Thanks to the amazing work of ScottYu-Jan and OVERWERK we have a cool stand for the iPhone. Marlfox did an amazing job by using parameters in Fusion to be able to adjust the size. What i did here is just figuring out the best size for the…
A highly detailed 3D statue inspired by Eleven (Jane Hopper) from the TV series Stranger Things . The scene captures her iconic moment of intense concentration, channeling her telekinetic powers as energy rises around her. The pose,…
The otherwise very practical IKEA lamp, for clipping onto a shelf, has unfortunately broken. Both parts of the clamp broke after only a few years and the whole lamp could no longer be used. In FreeCAD I designed a replacement part for it,…
A shade for the IKEA JANSJÖ / Jansjo lamp to keep the direct side light out of your eyes if the lamp is mounted at eye level. Print instructions Licence: Creative Commons - Attribution Category: Household
A stand for two external monitors (brand Arzopa). There are two versions of the upper parts: straight and tilted. The tilted one is 10 degrees tilted. The extra holders can be used, but it's not necessary. Link to the post .
Dobré ráno, Vítejte na mém profilu, plném modelů a miniatur :-) Mám pro vás stojánek na Airsoft pistoli Glock 17/18/19. Stojanek je velmi minimalist a má velmi pekné autenticke logo. Je na zbraň a 3 kusy zásobníků. Tisknuto bez podpor!!!…
The Trojan NTX Libra VII is a ½ X 28 tread Airsoft suppressor that I believe would be a welcome addition to any airsoft enthusiast. With an inner diameter of 6.5mm you should have no problems with baffle strikes knocking off your aim,…
One of my friends bought a USC Trojan Marching Band (Spirit of Troy) Lego figurine but it didn't come with a sword! How DARE they? So, I made a couple. The first one is realistically-proportioned 'long' version and the other one is the…
Můj první model ve Fusion 360 a to stojan na tužky. Přidal jsem do toho děrování v mém oblíbeném paternu a to Honeycomb
Jednoduchý stojan na mobil alebo tablet bez použitia podpôr. Dva uhly použitia. Na výšku aj na ležato.
Swords are too weak for this guy, he snaps them like toothpicks. Tree supports on build plate only works great. Scalable Tree Supports on build plate only Powered by ITree Supports on build plate onlymage-to-3D from MakerWorld…
Multiple rollers for the Jang Seeder. The Fusion 360 design is easily modified for new geometry. Three slightly different models based on the hole geometry: Circle: https://a360.co/3KP1984 Cross: https://a360.co/3P4eyMJ Square:…
This is a vented version of the current BTT Cable Door for EBB SB2240. I could not find any other designs with the new version that are vented, plus I think the angled vents match the Voron aesthetic well. Original BTT files can be found…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/bAtgLxkPDlw Category: 3D Printing
Vytištěno z materiálu PLA, výška vrstvy 0,25 mm. Pro zuby hřebenu, pastorek a osu výška vrstvy 0,15 mm. Matice přilepit do jednotlivých dílců dle výkresu. Výkres sestavy stojanu (výkres ve formátu pdf uložený v souborech): Typ mikroskopu…
Dobry den, Vítejte na mém profilu, plném modelů a miniatur :-) Já jsem Ainon3Dprint tvůrce modelů a tiskař Mám tu pro Vas stojan, holder na konzoly PS Vita, playstation Vita. PS Vita do stojanku pasuje krasne. Tisknuto bez podpor…
I really liked Scott Yu-Jan's iphone 15 standby mode dock, so I made it fit an iphone 12 with a thin hardshell case. I also modified the airpods charger slot to slot in from the other side, so that the rear of the case can be shorter than…
Dobrý den, Vítejte na mém profilu, plném modelů a miniatur :-) Jsem výrobcem modelů a tiskárnou Ainon3Dprint Mám pro vás stojan na telefon , je vhodny jak na vertikalni, tak horizontalni sledovani, nebo odstaveni telefonu. Snad se to…
Scanned bust of Jan Amos Komensky - John Amos Comenius - THE TEACHER OF NATIONS, THE TEACHER OF TEACHERS
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Dobrý den, Vítejte na mém profilu, plném modelů a miniatur :-) Jsem výrobcem modelů a tiskárnou Ainon3Dprint Mám pro vás stojan na telefon, je vhodny jak na vertikalni, tak horizontalni sledovani, nebo odstaveni telefonu. Snad se to…
3x2 silicon (or other) tube cartridges 50mm in diameter.
This is an LED lamp that is running WLED on an esp32 and it is in the shape of a DNA double helix. More info at https://www.alien3d.us/january-2025/ Print Instructions: No parts should need support. Print one of each file included (except…
Because of the detailed nature of this model, please at least skim the following information; it has been organized into easy-to read sub-sections. If you have built kit cards before and are familiar with your printer, you can skip most…
This is now a much better model than before. I have worked on it for hours to increase the details, and reduce the triangle count. It is much easier to slice and prepare the model for printing. This is a model for the Sarcophagus of…
This is a model of the Sint-Janskathedraal (St. John's Cathedral) in 's-Hertogenbosch, Netherlands. At the moment two models are available: One model with the interior One solid model Note : this is work in progress. I did not yet print…
Various word art names. Prints well at 0.2 on Mk3S+ and Mini+. Print face down on smooth PEI sheet for best results. Credit to Robert Halter.
An old file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model,…
Jednoduchý stojan pro plnění vosích hnízd. Snadný tisk bez podpor. Rozměr 170x170, 25 pozic.
The video: The assembly: Step 1 Step 2 Step 3 Warning The position of the lines is extremely important for the functioning! The pieces: X4 - Pin Horse G X24 - Pin Horse P X4 - Automaton A X5 - Automaton B X4 - Automaton C X4 - Automaton D…
Here's a model of Janeway's famous coffee cup that someone requested. The original prop was a Nissan thermal mug. Update log October 26 2024 - fixed the tag errors. October 12 2024 - Scaled the cup down to 80% size which is more fitting.…
Fallout4 stand for all 20 bobbleheads. Designed especially for the Prusa MINI+ 3D printer (or for another such small printer). “Podstavec - standardni” … can be used for any version of the figures “Podstavec - alternativni” … is intended…
Oryginalny model od destjus Bestia jest wygłodniała… to znaczy wygładzona… Chodzą plotki, że drukowanie zawsze zajmuje 21h i 37minut niezależnie od ustawień druku i skali, drukarka zacznie grać Barkę po zakończeniu wydruku. Druk można…
Většina dílu je nutno přizpůsobit na tiskovou plochu popřípadě otočit pro jednodušší tisk. K spojeni dvou části rámu přijde hliníková výztuha 8x8mm
There was no Free Wall Mount so I redesigned one fro the Original Lego Slave 1 to fit the new one. I printed mine in PETG with 20% infill and 6 Walls. Mine is holding perfectly stable but I wont garantee that I can't drop down due to…
Stojan na Tatru 815VT pod napravy
![Angle Finder/Protractor [Updated Jan 2025]](https://media.printables.com/media/prints/539316/images/8549638_d1265326-520c-4ba5-a0fd-e405e40e402b_b81fbead-3f1c-4e68-84ac-b189f6690d08/angle-finder-protractor-jan2025.png)
![[EN] Phone stand mk1 [FR] Présentoir/support téléphone mk1 [CZ] Stojan na telefon mk1 [DEU] Telefonständer mk1](https://media.printables.com/media/prints/87070/images/930933_115bb00f-c504-4ba8-90e4-bc33d2a9373a/support5.png)
![Stand for two external portable monitors [Stojan na dva externí monitory]](https://media.printables.com/media/prints/425235/images/3517722_aa61c70b-8f0d-4d31-91d5-0d99a8df5354/49_19.jpg)
![Rzułta Bestia z Wadowic Cerber / Hydra 3 Głowy wersja wygładzona [Remix] Papież Jan Paweł II 2137 Papaj](https://media.printables.com/media/prints/34a40ceb-d849-4b04-b5d5-f337baa87813/images/10127601_fbb6c14b-4c5a-47f6-99f6-77b2e6689dca_c2c24bb1-8a36-47db-bfd8-e1373e6ecc9b/img_20250620_125203.jpg)
