1 / 16
IKEA JANSJÖ Lamp LED clamp spotlight - complete Clip / Klemme — image 1
1 / 16

IKEA JANSJÖ Lamp LED clamp spotlight - complete Clip / Klemme

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Complete replacement clip for IKEA JANSJO lamp type V1431 (old design). The original rubber pads can be reused.

Rating
5 / 5
Likes
93
Downloads
266
Makes
6
Views
2,535
Reviews
6

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

The otherwise very practical IKEA lamp, for clipping onto a shelf, has unfortunately broken. Both parts of the clamp broke after only a few years and the whole lamp could no longer be used. In FreeCAD I designed a replacement part for it, which corresponds to the original, but is stronger at the points where the highest forces act.

Compatibility

  • Compatible with IKEA JANSJO lamp type V1431 (old design).
  • The clamp is not compatible with the new LED clamp spotlight model from Ikea called NÄVLINGE. The tip of the anti-slip rubber pads on the new model are round instead of square.

Features

  • Complete Clamp (2 Parts).
  • Increased material thickness in the area where the old clip was broken.
  • The original rubber pads can be reused.

Update of 12 July 2024

MainBody-V3 changes:

  • increased M6 cable clamping thread
  • additional M8 lamp stem thread

 

Print recommendations

  • Material: PETG
  • Nozzle diameter: 0.4 mm
  • Layer height: 0.20 mm
  • Perimeter: 4
  • Infill: 100%

 

Assembly

Insert the original rubber pads on both sides.

Screw the lamp stem into the intended M8 thread. A tip if the M8 thread is too narrow, you could widen it a little with an M8 screw or a thread tap.

Solder the cable and then insulate the soldered connections with heat-shrink tubing.

Use the original M6 grub screw to fix the cable in the strain relief. You've done it, that's it.

For the rotation axis I use a M3 x 40 mm flat head screw, which is 3 mm too long.
I shortened the screw by 3 mm.
To secure the screw I used a self-locking M3 nut.


My clip is working great for 2 years now.
Have fun fixing your Ikea lamp.

Updates

11 Oct 2023  V2 Initial release
12 Oct 2023  Update of the project description
13 Oct 2023  Compatibility information for Ikea models added.
12 Jul 2024  Additional M8 lamp stem thread and increased M6 cable clamping thread of the MainBody-V3.

Tags