Counting matching models…
Pocket Hole Woodjoining : tooling for drilling planks for assembly. mark template 2 for plank thickness. (10mm to 30mm) BOM : 1x Garabit 1 1x Gabarit 2 1x SCREW M5x20 STEEL 1x HEXAGON M5 2x drilling barrel 12mm diameter
Brackets for joining 120mm fans together. Join fans in many configurations for different applications
A basic 90 degree joining plate 2020 extrusions.
Brackets for joining computer fans together. Supported fan sizes: 220mm 200mm 140mm 120mm 92mm 80mm 70mm 60mm 50mm 40mm
There are a few 90 degree joining plates out there, with holes sized for M5 screws. I wanted to use these 3D printed T-nuts (https://www.thingiverse.com/thing:3050607) that use M3 screws, but the M5-sized holes on the joining plate were…
Default values are for panels with 12mm frames, 3mm mounting holes, 3mm pin holes. These settings will likely need to be customised for chosen panels (as they all various kinds of different). Diffuser layer is mounted with 4mm bolts + hex…
This joining guide ensures proper alignment and stability during construction projects, providing accurate angles and positions for drilling, fastening, or joining. Ideal for DIY enthusiasts, carpenters, or anyone working on frameworks,…
This model must be printed with supports and in the orientation shown in the image. A print pause is required at 18.6 mm to insert two M3×12 mm wood screws, which will act as the punches that pierce the PET strip. After inserting the…
-4mm Thick with M6 diameter screw holes on 30mm spacing -Dimensions 90 x 90mm -Can be mounted to 30 Based T-Slot rails
These are corner brackets to join and fix in place 2 TROFAST cabinets for the safety of the children. (do not forget to fix to the wall on the top of the assembly). p.s. prints in white PLA work wonderfully. Prints in place, no supports.
Original joining part to connect LED segments on the top of swimming pool is weak and easy to lose or even destroy, so this is replacement - stronger, longer and hopefully longlasting :) Updated - 2 more extended versions with better…
This plate replaces the joining plate found in the Sennheiser GA4 rack mount kit for the Senneheiser Speechline SL DW wireless microphone receiver. It enables two receivers to be mounted side by side. I suspect that it will also replace…
Sometimes you want to join two 2020 extrusions together but in a way that can be removed without any tools. It is sometimes possible to use the Annex “corner” clips for this, but sometimes this is not possible. My use-case, for example,…
90 Degree T Joining Plate for 2020 extrusion.
Simple bracket to join 2 IKEA lack tables together. Filament: PETG Infill: 40% Layer Height : 0.2 5 Walls, 5 Top / Bottom Print in horizontal position.
This model is designed to mount multiple IKEA LACK tables together . I use it for my DIY lack rack. Print it in 0.3mm PETG or smaller layer size. I do not recommend PLA as it breaks more easily. This design uses 2.5 mm screw holes and…
Upcycled PET is more challenging to join than most filaments since it requires higher heat (250C+) and needs to be cooled rapidly to avoid crystallizing. The SunLu FC01 filament connector and various other joiners use a PTFE sleeve or…
I've simply sliced up the jaws in multiple ways and rearranged for the 28mm spacing of openGrid, also added some height to grip more reliably. I did not change the width between pegs for now, so pressure is only applied to the straight…
4 simple joining cylinders for PTFE tube. Two of the cylinders are friction push (for white and Capricorn tubes) and the other two use the large or small push connectors. The sides are segmented to help with grabbing and twisting. The…
I bought a “Pinnacle” brand shelving unit from Bunnings, The vertical posts are half height and joined in the middle. One shelf is meant to be in a fixed position to strengthen the join. Unfortunately I did not want a shelf in that exact…
Piece designed with supports for stacking the ikea helmer furniture. You can see piece with easy removable supports pre-designed and without supports. Designed to add M3x5x4 inserts and screw from the inside. You can buy inserts on…
There are many types of plate clamps in stores. Everyone will find some advantages or disadvantages. Parameters infill = 15% material = PET-G layer = 0.15mm Accessories: straight ruler high wall I decided to make a crush for my own needs…
L Shaped 5 Hole Joining Plate for 20x20 Aluminum Profiles. ---------------------------------------------------------------------------------------------------------------- Welcome to my Page. If you enjoy my content, and would like to…
The model consists of two end caps left and right to give the roll ups a more polished look. There is also a joiner piece so that if you mount two blinds side by side they can look more as one piece of furniture rather than just screaming…
L 90 Degree Joining Plate Corner for 1515 extrusion (m3 holes standard countersunk). My first and Simple design after a couple freecad tutorials. Dimensions 50mm x50mm x3mm
For joining my Skadis panels together. See panels at collection https://www.printables.com/@HighDesertHacker/collections/2757420 Attach to the M3 mounting holes on the back side of the panel. Back side mount results in a clean look. Using…
For joining my Skadis panels together. See panels at collection https://www.printables.com/@HighDesertHacker/collections/2757420 Uses the M3 mounting holes at the corner of each panel. This frees up Skadis slots for your accessories.…
Makes it much easier to join together mutliboard panels using multiboard's dual clips. Twisting the knob applies even pressure on each board. Print the jaws on their side with organic supports to get the strength you need. Assembled with…
The kids were always trying to make walls or tunnels with the mats and getting frustrated. I created these brackets. Maybe you'll find them useful too! https://www.ikea.com/ca/en/p/plufsig-folding-gym-mat-green-90278927/ You'll want to…
The Fast Filament End Cutting Guide is your prefect template to get that perfect 45 degree cut every time. No hassle trying to load filament, this makes it right every time. Works perfectly for joining filament, either with the PTFE tube…
1515 parallel mounting clip. Joins two parallel sections of 1515 extrusion from 8020. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: PolyMaker PETG Category: DIY
I made this bracket to securely mount two drawer units together. It uses 3.5x20mm wood screws. Be careful when screwing the screws, overtightening will crack the layer lines. I use standard Voron settings - 5 top and bottoms, 4…
Clip to join a GT2 6mm belt to make it closed loop.
Fix your bed in minutes and sleep without worries! Is your bed frame falling apart? Are the slats sliding around or making annoying noises every time you move? This heavy-duty connector is designed to lock two boards (slats) together,…
I will Release a 40mm Version soon!!! Inspired from some other very nice Squash feets I wanted to create my o es, for hopefully more stiffness i have printed in petg with 20% infill. I will use Squash Balls with a diameter of 30mm and two…
A straight joint cover would not fit in the curved elbow. This design provides a channel to house and protect the cable. Join the wires by soldering, then shrink sleeve. Seal with silicon. Print with 4 vertical perimeters to slightly…
This bracket will just give your shelves some stability if you put more than one shelving unit next to one another. There are two versions that would allow the joining of 2 shelves or a version that supports 4 shelves standing back to…
The rubber of the shaker, which was held together with the rubber, broke. With this design I made, you can hold 2 Shakers together. Requires 6 m3 x 5 bolts and 6 nuts.
I printed this in Draft with 4 walls with a 0.8 nozzle with PETG that really needed drying and it is really strong. The default print is 10mm tall, if you flip it over and print it 8mm into the bed you get a nice front plate to sandwich…
3 sizes of biscuit for joining composite wood. I used these on composite decking material and used polyurethane construction glue for bonding. They are standard dimensions. The numbers help with glue retention. I was inspired by some…
Hi, this is my design for a joining bracket for two seperate dry lining boxes placed next to each other. I had to cut part of the locking tab on my Appleby Dry Lining Box to make the sockets but up against each other. Leaving little space…
This three sides edge eoint is my interpretation of the model slant3D showed in this video:
This is a an adapter for this model that joins its two parts without the need for adhesives. Allows for the quick assembly and disassembly of the watch stand, as well as easy removal of the charging pad. Additionally, the adapter has…
The idea of the rails is you can slide the red hodlers in and out. This is hard to reach though as they are on the wall. I wanted to be able to close in front of the load. you can probably use this with any other kind of strap as well..…
I didn't like the cardboard box and polystyrene foam insert that the jig came in so I made one. I modeled the holders after the top and bottom foam inserts. The models have holes for inserting 6mm magnets to hold them together. I labeled…
I like to join the HSW panels that I can print on my bed (220mm) into larger panels (what I call "6 packs" which are 3 columns x 2 rows of panels that are usually 8x8 HSW panels. This is so I don't have so many connections to join them…
Features Strong, low-profile triangular connector design Suitable for joining two tabletop panels, boards, shelves, or furniture elements Designed for 3.5 × 16 mm Spax screws Reinforced geometry for high form stability Efficient design…
Kallax Joining Plate (with hidden screw caps) Join two stacked IKEA Kallax units using the screws that are already in them. No drilling, no visible brackets, no glue. Each Kallax has a fixing screw near the front edge of the side panel.…
I made this spacer to join the bottom two screw holes of the dual 5015 fans connected to the Taurus V4/V5 duct for the Sprite Pro on my Ender 3 V2. It helps keep the fans stable and prevents them from moving or flexing. There are two…
Fix your bed in minutes and sleep without worries! Is your bed frame falling apart? Are the slats sliding around or making annoying noises every time you move? This heavy-duty connector is designed to lock two boards (slats) together,…
I've simply sliced up the jaws in multiple ways and rearranged for the 28mm spacing of openGrid, also added some height to grip more reliably. I did not change the width between pegs for now, so pressure is only applied to the straight…
A straight joint cover would not fit in the curved elbow. This design provides a channel to house and protect the cable. Join the wires by soldering, then shrink sleeve. Seal with silicon. Print with 4 vertical perimeters to slightly…
L Shaped 5 Hole Joining Plate for 20x20 Aluminum Profiles. ---------------------------------------------------------------------------------------------------------------- Welcome to my Page. If you enjoy my content, and would like to…
