373 models
The currently upload design is simply the bay for any JR Tx module. This was created per a request with the idea that it could be expanded on to create a bay for the back of any radio that does not have a bay for JR Modules. Once…
Wheel model for RC drifting.
An upgrade to Monorim MX0 to allow stable rides without wobbles way beyond the 100kmh barrier. Needs sheetmetal manufact
LOTS MORE! DeskBuddys here: DeskBuddy Collection by Me3D | Printables.com Rate, like & comment if this brat belongs on your desk throne. Recommended Print Settings: • Layer height: 0.16 mm • Line width: ≤ 0.35 mm • Detect thin walls:…
📘 Description (EN) This model is a civilian-use Junior Mobile Suit inspired by Mobile Suit Z Gundam . It is designed as a non-combat mobile suit , intended for industrial and commercial work rather than military use. The proportions and…
Ever had a dream about a guitar but didn't want to spend thousands of dollars? Like to tinker and build? Here's a fun project for ya. Printed in PLA on a slightly modified Ender 3 V2 with a 1mm nozzle. The design is based on a 1959 Les…
I printed this in “marble” PLA. This is still a work in progress. I have more ideas about this :) Use the “glow” model for printing glow in the dark doors and JRR symbol. Slice, then at the layer where the design begins, pause print and…
Made a quick remix of the already discontinued betafpv Micro-Nano module adapter (they probably realized they can make more money making a ELRS Micro module) to be used with TBS nano style transmitter modules and hopefully other nano…
Here is the Pixar Luxo Jr lamp totally 3D printed on 200x200mm bed and with led light ! To realize it you need white PLA for all parts except for : Join rods : you can used for it american fridge's pvc pipe (1/4"pipe) Light : you need a…
A simple box/stand to hold 10 clipper guards (designed for 1.5 - 25mm guards) Internal width is 52mm Smallest slot is 10mm, largest is 34mm.
Holds about 16 bottles of 10mL insulin. I made it to fit inside the footprint of the very small Frigidaire table-top minifridge (bottom of fridge measures about 135x135x125mm). -Please ignore the terrible top surface quality of my print…
JREV Floor Extension
Circular Hijri Calendar - Ramadan - English Support: The left and right sides needed support with my printer, it couldn't bridge that distance. Supports were easy to remove. You can block supports on the peg holes.
Rear Axle Bracket as reinforcement and for 125mm axle drop out motor brake disc mount adapter
The sjrc f11 pro drone has a very low rear propeller, therefore it has problems with landing on grass and rocky terrain. Mounting the landing gear solves this problem (If you do not have a landing pad), because it raises the drone…
I came across this on Tinkercad, but it contained quite a few errors in the model, misaligned bits etc. So I cleaned it up and made it more printable and now it lays flat on the print bed, the slats are properly meshed with the crate body…
A series of flywheel cages for the gryphon that use either hurricane/pulsar or banshee Jr flywheels. Each type comes 32.5, 33, and 33.5mm crushes and two different body types: a standard version modeled after the regular gryphon cage and…
A replacement tray for the American SNES Jr. that lets you use games imported from Japan without modifying your original cartridge tray. Print it with the slot at the bottom to ensure that the top curve is correct. It will require support…
SpaceX landing pad from the drone ships "Just Read the Instructions", "Of Course I Still Love You", and the newest one “A Shortfall of Gravitas”. Print one or all three. Print instructions Start with a base color of Charcoal Grey or…
Wheel model for RC drifting.
I share it so that more people get… a really nice model :D
A tiny scaled model of the Little Tikes Jr Activity Gym! All credit to them but I wanted a tiny one for my desktop. Print Settings: .1 mm to .2 mm layer height 100% infill since the parts are so thin Print 2x of the side piece Assembly…
[Update 15-5-2019] I bought some lights for this truck and updated my files to allow for easy instalation/wire management. I redesigned the "Spacer" and the "Servo Tray", which now has 2 versions, for a 9g or a 55g servo; with the 9g one,…
Marvel inspired Big Brick Minifigure - Dr. DOOM - RDJ / Robert Downey Junior - PLA - Layer: 0.20 mm - Support: Treesupport / normal support (side cutters / pliers are needed for removal) - Brim: Recommended for a few parts It could be…
My daughter has discovered the one-season Rocketeer sequel series on Disney+, and wants to be Kit Secord for Halloween. Unfortunately, with a live action series back in pre-production, Disney pulled the plug on the show and there don't…
Handlebar Bracket for 31.8mm handlebars
If you like this model, feel free to tip me at https://ko-fi.com/kcthechemist. If not no worries and enjoy! Fix It Felix Jr's Hammer from Wreck-It-Ralph. I recommend assembling with Original Superglue. Check out my bigger…
3x Stencil - Soccer player Neymar JR Tested by applying paint with a sponge on paper and airbrush. Dimensions: 165x235x0.4mm (2x) and 210x210x0.4mm Layer height 0.2 mm Pencils are allowed, I recommend increasing the Stencil thickness from…
Recreated the Power & Reset buttons for the SNES Jr. Someone requested this one, and was a fun challenge! They've been printed and tested to fit as close to the originals (see the red painted versions I did)
This is an adapter for the TBC Crossfire Micro and Full TX, which will fits right on your FrSky Taranis X-Lite. Wiring All you need to know, how to wire it up, you can find on my Blog: English:…
A Pixar Luxo Jr. themed ball that requires no AMS, AMS Lite, MMU, or any other automatic material changer. Parts are held together using miniature locking pins. No adhesive necessary. The 70mm sized ball is ideal for juggling and the golf…
If your MEC 600Jr Mark V is mounted to an Inline Fabrication Quick Change plate, you've probably noticed that the spent primer catch tray that comes with the MEC does not fit properly because the rear-right mounting screw that comes with…
I load a lot of buckshot when reloading shotshells and therefore wanted a way to keep dust and debris out of the shot and powder hopper ports/charge bar on my MEC 600Jr Mark V when they're not in use. I designed these simple threaded caps…
RC Car This is my version of a 3D printed RC car. This design is inspired by the Tarmo5 project by user Engineering Nonsense. I tried to keep as many parts printed as possible. Take a look at the BOM below for the complete list of printed…
I made this to replace the broken cover on my X9D. It's based closely on the original moulding, but with a chamfer at the root of the catch to avoid stress risers and aid printing. It fits nicely on both the FrSky X9D amd Jumper T16. The…
Keeping my JR radio's that accept a frequency module was the smartest thing I have ever done. I have been able to use my radio's on the Ham bands and many other formats that are available. I'm building a submarine for my pool and I found…
This is a remix of the official ExpressLRS JR module bay. I noticed that the official one didn't fully lock into the JR module slot, and after a bit of tinkering I found out that the little clip is way too long, and doesn't engage with…
I designed a plug to fit into a Jr. hockey stick for my son. It fits tight, which is to be expected, but you may need to use a file around the top if your stick tolerances are a little different. I added the step file for those of you who…
Simple cover for the JR module bay. Customize at your own. Category: R/C Vehicles
*** Please note this is fairly old “project” but could be useful to pick up from, also not anymore maintained so please feel free to “fork it” and call it your own (CC BY-AY) *** How to use Cura 2.3.1 with your daVinci Jr (This is a Mac…
Floorextension 20mm
This is a tool to unscrew or screw in a JR-Cache 21,5 mm filter from your faucet. Print Settings Printer: Anycubic Vyper Rafts: No Supports: No Resolution: 0.2 Infill: 100 Filament: Creality PLA White Notes: Maybe with ABS, ASA or PETG a…
WHAT IS IT? Many Clue Jr. games come with little cardboard game pieces for each character and a piece of furniture in each room. You have 7 yellow and 7 white stands for the pieces. You usually have stickers underneath, but that isn't…
Archive of all Ninebot G2 Scans
Numberplate holder, needed in certain countries together with JREV Rear Fender
Complete collection of G30 scans
Now features accurate holes for mounting to the frame, as well as space to place a DIN 125 washer below the screw. This version is also compatible with a COB LED. Used COB LED: https://a.aliexpress.com/_Ewcz7Qa Compatible with same Lense…
JREV Floor Extension for 16S6P configs
A bracket for securing in a USB-C port for modding your SNES Jr or Mini
This was printed at 2" x 2.61" x .17" and .15mm layer height with a .4 nozzle. Made for our local homeschool groups field trip to the ambulance base.
DIY JR Module Arduino and nrf24l01 for RC Taranis X9D. This remix was done, because the nrf24l01 format probably changed and mine did not fit. Category: R/C Vehicles
english home battery case design for sjrc f11s is compatible with other f11 models, i recommend printing the main body vertically and the side flaps putting print holders is the only place needed project for those who want to mount their…
A clip-in enclosure for the Matek mR900-30-TX or mR-24-TX. If you are using these as a dedicated SiK telemetry replacement using USB serial connection, you can use this mount to protect the rear of the PCB and mount your mdem somewhere…
Japan Racing Wheels - JR-11
JR module bay cover. Fits nice and snug, goes in both ways. Easy 2 part print. Glue two parts together, locating lug for easy alignment. I have printed mine in ABS, so i have used acetone instead of glue. I have also rounded the edges…
I Give All Credits To The Original Designer modmon On Thingiverse. Here Is The Link To The Original Design https://www.thingiverse.com/thing:4830329 . Your Welcome To Make A Remix Just Link To The Original Design And Give The Original…
To mount the wheel you just need the screw that goes on to the compatible models and you are good to go, install the wheel into the position. Be aware that the original wpl/jjrc tires don't really fit ot these rims and that the little rim…
Happy Model Express LRS JR module enclosure. Clear Plastic LED 5V fan from Amazon . https://www.amazon.com/gp/product/B087Q8SDHB/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 I used a 5v voltage reg for the fan to avoid magic smoke…
It's like the Fudd foregrip, but smaller! Intended for lower FPS cap games where you'd really want to use a short barrel in your Cynthia. Uses the Dart Guide and Top Rail from the full-size Fudd foregrip. All the same hardware too, with…
Are you ready for a new constructor brick experience? Try out this Brick3D Demo and discover the power of 3DP-optimized bricks that you can reprint in any color, any size, any number of times you want! Files marked with "PP_B" are for the…
Didn't really like the existing modules so I designed my own with different lids depending on what I will use it for. The lid with 18mm hole will be used with TSLRS since I use a 16mm circular locking connector. If you like my designs…
Martin (Michael) Luther King Jr. – Buste 🇫🇷 Français Ce buste représente Martin Luther King Jr. , figure majeure du mouvement des droits civiques aux États-Unis et symbole universel de la lutte non violente pour l’égalité et la justice.…
Her er alle folkenes tegn til Landslejr2026, designet som perler til skjorten. Du kan enten downloade alle tegnene sammen, eller hvert tegn for sig selv. Specifikationer 14mm på den korteste led, og 2mm tykke Indgraveringerne er 1mm dybe…
Recently I found out about these tools for removing microfit pins from their housings and they're the best dang extractor tools I've ever used, and deserve a nice case to house and protect them. I remixed the amazing rugged box by Whity…
Taranis Holder. Just tested the mount. Works great. Please upload a photo of your make. This design is not for commercial use or selling! Du möchtest dieses Teil haben? Schreib einfach: Facebook: http://www.bit.ly/contact\_ps915…
Front Stem Light, for the JREV Light Environment
neymar jr funkopop brasil psg alhilal football figure soccer collectible stl file 3d printable toy minimodel sports memorabilia custom pop fanart detailed model brazil team gamer decor vinyl figure style r10 miniature figure sports figure…
Almacén en forma de crayola Almacén multiusos en forma de crayola Version seccionada sigue en fase de prueba
20% infill Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Infill: 20% Filament: Prusamint PLA Category: DIY
Simple wall hook for Stanley Sortmaster Junior boxes
Printed on X1C with 0.2mm nozzle Supports: Yes Type: Normal On build plate only: Yes Remove Small overhangs: Yes This is the USB-C Power board: https://learn.adafruit.com/adafruit-husb238-usb-type-c-power-delivery-breakout/overview Close…
I modeled this version of the new Portal Gun Jr. that appeared in episode 10 of season 9 of Rick and Morty.
Customized version of https://www.thingiverse.com/thing:2280529 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2280529 Instructions Using the following options: widthSquare = 150 wallThickness = 0.8…
wall mount for JR Modules: Crossfire, Ghost, Express LRS, R9M, ETC.
Just a quick mecha that I threw together for use in your favorite 6mm giant robot games. If you like my work and want to see (and print) more of it, please consider stopping over at my online miniatures store at Punkin' Figs . All of my…
While I made the model from scratch, I'm calling this a remix of theihdes's 20oz version. It was heavily inspired by it, so credit where credit is due. :) I couldn't find a 12oz version, so I made one. Print the top and bottom, invert the…
This is enclosure for LRS i developed. Finf out more on project site. http://qczek.beyondrc.com/qczek-lrs-433mhz-1w-lora-rc-link/ Category: R/C Vehicles
This is a mount for a Logitech camera utilizing the empty 3mm screw hole on the X-Axis motor. Once complete you'll need a 3mm x 35mm screw to mount the camera (C170 shown in pictures) and a 3mm x 8mm screw or 3mm x 10mm to mount to the…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles Kirby inspired, Poppy Bros Jr, Tabletop DnD miniature 25 mm medium base which can be used for DnD and other Tabletops.
A lithopane of Martin Luther King, Jr. in honor of his legacy in the pursuit of justice, freedom and equality. The things we choose to design and print are indications of the things that we value and honor. What will you choose to…
- Brake Disc 155mm - Complete Rasperry Pi Display Cover - Radiator plate
Intro: So I bought the official Open Smart Tag from XYZprinting and a Prusament Galaxy Grey spool. I thought the way I would make this work would be by rewinding my XYZprinting spool with the new filament. But then I realized that maybe…
I designed this case to serve a dual purpose. Mainly as a Gridfinity compliant tool tray that can be stored in a drawer or on a bench/shelf in the workshop and can also be stored in a closed case to be carried to a work site. The design…
JREV Ninebot G30 Floor Extension 10mm Fixed locking mechanism between components.
A small 1x2 caddy for the bathroom or kitchen. Gridfinity by Zack Freedman. Disclaimer: Please refer to the manufacturer of your resin for associated health risks. Please take proper steps to cure your prints properly and follow all…
Japan Racing Wheels - JR-25 Felge
This is a Speed Wheel for a Panavise Jr. I recreated the wheel and added retention nubs to it. I found that the one sold by Panavise would occasionally fall off if you're spinning quickly. This one has a tight fit and won't come off until…
I got tired of my external modules sitting around so I made as holder for them.
This is a replacement housing to make a toy drone fly again. It works and has been tested by the children for its robustness;-) The drone's lights look even better than the original black one. The original folding mechanism to convert the…
A low-poly model of the Martin Luther King, Jr. Memorial in Washington D.C. adapted from a SketchUp model by Peter Olsen. http://sketchup.google.com/3dwarehouse/details?mid=814f42baa1a7bdaf1f2b60986ab4327c&prevstart=0 Details about the…
Made from Tinkercad, Bobby Witt Jr is my favorite player
