Counting matching models…
Juiced Y-motor holder Fits on Prusa MK3 MK3s MK3s+ To prevent loud vibrations i added a 1 mm gap between the motor and the rear frame. To assemble the holder you need new screws and nuts 1x M3 x 10 mm (motor) 2x M3 x 30 mm (motor) 1x M3 x…
The iconic possessed sculpture from the 1988 movie Beetlejuice can now be brought to life on your 3D printer. “This is my art and it is dangerous!” -Delia Deetz Please like and share your prints. Follow me for more upcoming designs.
No supports needed, print it in 0.20mm in PLA, available in 3 sizes tiny medium big You can scale it to make it bigger (photo shows medium and big) A regular version is available for the box/carton, but you can also print the version with…
You can insert and remove the Juice Booster 2 from the wall mount without any tools within seconds. So you can easily take your charging cable with you, to be able to load your electric car on public loading stations and as well use it as…
Model of mini drink carton. There are three suggested model variants, but you can be creative and do whatever you can. The model is made from two parts. One is the main carton, and the lid, so you can print them separately for different…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This holds a juice box so a two year old can drink his juicebox without squeezing it and spraing juice all over the living room while you need to work from home during a pandemic... Print instructions Just print in PETG because that is…
Diseño de placa de la famosa película de Tim Burton Beetlejuice. No necesita soportes. Diseño ajustable a cualquier cama de impresión.
This is a citrus juicer that is designed to fit into a standard 2-cup glass Anchor brand measuring cup. My wife was annoyed with juicers that didn't have enough of an "edge" to release the juice from her citrus, so this one has sharper…
Supports Are Needed. You Can Use It For Squeezing : Oranges Lemons / Limes Grapefruits and other citrus fruits. Enjoy & Share your prints with me !
Citrus reamer for juicing oranges, lemons, limes, etc. Two versions are included, a solid version and a hollow one with internal ribs. The default size is probably too large (unless you want to juice grapefruits), adjust size before…
https://www.thingiverse.com/thing:4524495. - Original Used PLA Prusament .4mm Nozzle @ .2mm layer height. 15% Infill and 3 walls. Worked incredibly well for me! Make sure to like and subscribe!
This is not my Model! Just bringing it from Thingiverse! https://www.thingiverse.com/thing:2638683 Original Description from maker "iomaa": Juice squeezer . Designed to fit into a cup or a soup container.
This is a remix of my space juice toy into a container. It's about 122mm tall, has a 56mm outer diameter, and an inner chamber diameter of 50mm. The small model version is 86mm tall and 42mm in diameter. I like my lids to be snug so you…
I couldn't find a case for my Raspberry Pi 4 with PiJuice HAT and Waveshare PoE HAT installed so I made one myself. I use it for HomeAssistant but there is nothing HA specific so it can be used for anything else. FreeCAD source code is…
This Citrus juicer will allow you to enjoy your morning routine citrus drinks or squeeze citrus fruits with easy and leaving your workplace clean. Features: Easy to clean No cup required Allows you to pick out seeds Easy pour into any…
I loved samuel's original design, but only had mason jars laying around so I remixed his with mason jar threads replacing the 4 prong type used by jelly/spaghetti jars. I also rotated the drain holes within the center of the juicer to…
This is a lid designed for Juice Plus Tower Garden. It was designed for the Flex system. Use it to cover the holes that are not in use to prevent rain/bugs/whatever from entering. The pieces actually snap into place and do not move in the…
This is my version of the Lemon Bolt originally designed by romanjurt. My modifications include: fins for better grip while screwing the bolt in wider opening at the top as lemon leftovers where getting stuck stronger teeth additional…
The Beetlejuice Sandworm is ready to strike a fright into your Halloween lineup! We’re happy to share this simple free version of our design with the community - but the true Serev3D experience goes far beyond this single design! Want…
I remixed the cable hook from Sulya for the wallmount for the Juice Charge me Type 2 plug. It should be printed with UV and temperature resistant filament if it was to be mounted outside. I would recommend ABS or ASA. -- Ich habe den…
I designed a juice box holder to help prevent my kids from squeezing the juice everywhere and the tantrum that ensues thereafter. Added my kids names after making the original model, but should be much easier with PrusaSlicer 2.6’s text…
just a basic face down sign of a good movie. drag it in, split it, color it, assemble it and print face down for a nice texutred look. NO SELLING!
You can screw this on the top of a PET bottle and when you use it, the juice will flow right into the bottle. fits PCO1881 type bottles (like diet coke). Settings: any filament should work, but PETG, or another foodsafe and strong-ish…
Just a hilarious juicer in the form of a Calamari, I hope you like it! You can print this with food safe materials, paint it with food safe epoxy, etc. Or just give it away as a joke! Easy and quick print in about 2-3 hours. Lay it on…
A buddy of mine bought some USB buck converter boards and was going to make an adapter cable and I had the idea of this box instead. It has one set of power poles in and 2 sets out, and then USB to power a PI, what have you. This box is…
You can screw this juicer on top of almost any bottle and when you squeeze your orange the juice flows right into the bottle. The design is specially made for 3D printing. No support is needed to print this Thing.
Directly into tea, salads, sauces... - !! without losses !!
🍊 Add flavor to your vinyl setup! Choose your favorite “juice” — orange or lemon — and bring color to your records. 🍋🎶 Printing Instructions Print in PLA with 0.2 mm layer height, 3 walls, and lightning infill for a strong yet lightweight…
I liked the original design of Juicer - citrus reamer by milangladis In this remix I made a couple of important improvements: flattened the base because there is no way to nicely print such a shallow curve on FDM machines. hollowed out…
Simple and usefull juice or milk package holder (1 litre) / Простой и удобный держатель для пакета молока или сока 1л.
Introducing the Juice Wrld Spotify Codes Keychain, a unique and stylish accessory for fans of the artist. This 3D printable keychain features a Spotify code that can be scanned using the Spotify app on your smartphone, taking you directly…
NOTICE: The models were designed to be printed with a 0.2 layer height. If you make them larger or smaller, you will also need to adjust the height of each color layer so that each color is printed at least two times. We all love…
Beetlejuice Beetlejuice Beetlejuice! 🪲 Here's a pair of classy Beetlejuice earrings for Halloween. I saw these on Amazon but the Victorian style outer frame was lacking a lot of details, so I recreated them! Enjoy! This model is ideally…
Juicebox holder with grip and Paw Patrol logo Design inspired from an original juicebox holder Difrax Size of the juicebox width: 40mm length: 54mm height: 80mm --- If you like my work, don't hesitate to support me by paying me a ☕…
A simple citrus juicer with a large container. Rather, there is no need to say anything about it. it can be printed without supports, and one should use 3 outer walls
A cool Wallart for juice wrld fans you need to colour it
Orange Juicer 3D Model – 3 Sizes Available (420ml, 590ml, 740ml) Designed specifically for large oranges, this juicer comes in three sizes: 420ml, 590ml, and 740ml. Each size is perfect for extracting the maximum amount of juice…
Beetlejuice lithophane i am tinkering with
Citrus Juicer top and base.
Prints easily with no supports and you can do a filament swap at ~79.5mm to make the top a different color. This can is very sturdy and doesn't have any sharp edges, making it is a "safer" 3D printed toy. I designed this for the LM Show…
Creator:tammo66 https://www.thingiverse.com/thing:2205631
Citrus juicer which can be screwed on a mason jar so the juice drips inside the jar.
No Support needed Recommended Print Settings Material: PLA or PLA+ Nozzle: 0.4 mm Layer Height: 0.2 mm Wall Line Count: 2–3 Infill: 10–15% (Gyroid or Grid)
Here is some transparent PLA that works well for me: https://www.amazon.com/gp/product/B08VRM8KZJ You can print this model in vase mode fast or solid depending on your needs. Either way works. Could be a fun gag to fake spill or something…
Beetlejuice Film / Cinema room sign, Colours can be altered to whatever you prefer through your AMS (Bambu) or through you current printers configuration. Large Measurements approx.: 22cm x 7.5cm x 2cm Medium Measurements approx.: 17.5cm…
Juicer with seed catcher and thick/thin versions for citrus fruits. Printed in PETG.
This is my little desktop/wall mountable vape eJuice stand. Designed specifically for 30ml vape juice bottles. The fit from my print is perfect and needed a once over in each hole with sandpaper for smooth slide in/out. If it's too tight…
The IP5328P can be installed facing up or upside down (see "ud" in the filename), which makes it slightly smaller. The version with the IP5328P facing upwards is easier to install overall, but please note the picture showing the cable…
I had to replace broken cones for juicer that I can't find anymore on the market (too old). As I didn't wanted to throw them in the trash, I design them using Fusion360 from original model getting inspiration from this video → Printed in…
Bring the mischievous and chaotic spirit of the afterlife to your collection with this vibrant 3D print of Beetlejuice. This model perfectly captures the eccentric charm of the ghost with the most, making it a must-have for fans of the…
Ersatzteil passend für Hurom Entsafter Spare part compatible with Hurom Juice Outlet Please publish your make, if done
These containers fit North American caps from milk or juice cartons. Technically, this is not a remix, since I designed these from scratch, but my design was inspired by the milk cap containers by marinorl and pixi2012. The problem was…
You may own a Krups Type 250 juicer for citrus fruit. It is a virtually indestructable kitchen appliance from the 70s. However, parts get lost. If you lost the most important part, the juicer head, this model can replace it. Please note:…
Model of a Naked Juice bottle and cap, intended as a starting point for upcycling projects. The FreeCAD file contains a spreadsheet with most of the measurements in the sketches are parameterized. The neck and cap are double-threaded, and…
I really like lime juice, I often use it in drinks and tea. The juicers from the store were too big for me, so I made one to measure for the lime. The container also has a lid that you can use to squeeze the lime. Since the printing…
serpiente del desierto de la película Beetlejuice
My younger kid wants to do everything that the older one can do. This includes drinking out of juice boxes from time to time. The model fits the Honest Kids juice box with a little wiggle room. Included in the design are filleted corners,…
I am a big fan of Juice WRLD and want people on printables to enjoy this
can be seen in the trailer for his album The Party Never Ends https://www.youtube.com/watch?v=4hN5iDe8lNA 999 Listen to some of my music here! https://app.freecords.com/profile?id=f2d41794-a88a-4c3a-af4c-537364cfc322
1mm Thick. Print face down and painted both sides for best clean color.
This Space Juice can holder will keep your NOS or favorite 12oz beverage safe and it's condensation contained away from your workspace. This also makes a great pen/tool cup 😁👍 The side opposite the alien has an LM logo for the LM Show!…
Juice : Little Green Army Men : Fighter Pilot : Tarmac
This is a Alcohol Anonymous Juice Wrld Coin That was features in his Music Video "Cigarettes"
A remix of that awesome lemon juicer, with two small changes: The lemon engraving has been removed. It was a nice touch, but it's not necessary, is slower to print, and can be difficult to clean. The bottom overhang has been removed, so…
I made a Juice box Holder specifically for Honest Kids Juice Boxes. I am sure it will hold others as well. 39mm X 54mm interior
Separated the original model with slight modifications for easier cleaning. 20%-30% infill Category: Kitchen & Dining
Only print original if bed adhesion is perfect. This wall piece was designed as a memorial-style print inspired by the 999 mindset. Halo, wings, and drip elements are combined into a single silhouette that prints clean and looks solid on…
Beetlejuice, bitelchus. pelicula 1998, escala 1:10
At my local grocery store, they were giving away hundrets of smoothie bottles for free. So I took some home and designed this bird feeder for them. It works with Bottles that have a 38mm thread and the top part (to hang the bird feeder on…
This is the mouth plate [spell], modelled for cosplay, that Beetlejuice casts on Barbara Maitland (played by Geena Davis) during the wedding scene in the first Beetlejuice movie from 1988 by Tim Burton. Put the mouth plate in hot water…
Thks Walter for the design! I just wanted to have a handle to easily apply more fore pushing the juicer into the fruit and twisting it. Benefit is, you do not have to use a brim or raft for printing any longer…;) Since the original size…
Beetlejuice - Beetlegeuse - Betelgeuse sign I created derived from Max Corbetts design found on youtube. My version uses an Arduino Nano with 3mm leds, 2 - ULN2003AN transistor arrays and 5v USB power. In order to get everything to fit I…
Model of a Tropicana orange juice PET bottle (52 fl oz)
About the Design The Braun juicer made in the 1970's and 80's was built so well that it still runs today. A coworker brought this to my attention that he still owns one of these juicers. The basket started to crumble so it was time to…
Citrus Juicer Black And Decker
Vectorized 3d image of Alien Juice COCA COLA for home, bar... decoration.
Here is the JuiceBox 2.0, it now has a USB C & A buck converter in it. It is still 1 PowerPole input and 2 PowerPole output. Here is the link to the buck converter used: https://www.amazon.com/dp/B09D98799T I printed mine in Orange ASA to…
I remember a glass juicer my mother had that she extracted lemon juice to make lemon pies and fresh lemonade. this is similar except it attaches directly to a PET bottle to catch the juice rather than pouring it from the collection tray.…
My 13 year old daughter has type 1 diabetes, so she carries around a juice box regularly to increase blood sugar levels when it is low. Occasionally, we found the juice box getting crushed in her purse, so I decided to build a box for it.…
A lid to go on a Mason jar (or any jar) that makes it a juicer.
The entire set of stands for SodaStream, bottle holder, juice holder. Parts can be connected thanks to special wedges. Everything should be printed on its side without supports!! If you want to sell my designs, write me a private message…
This is an easy to print version of the driveshaft from the Thermomix WunderJuicer, to replace it in case it broke. A M5x20 BHCS is used to attach the parts together. There is a modifyer body included to increase perimeters and infill for…
A rack for 16 liquid bottles. The basic idea (43 mm, 4 levels with 4 places) is from Only_Sascha (twitch). The design of the parts and brackets is mine. The STL files are oriented in the printing direction. Support is only absolutely…
This is a replacement for the Braun Juicer 4161 switch spring (part #81262218). The original part got some fatigue cracks over the years. I was unable to obtain an original spare part, but I didn't want to throw away a good juicer, so I…
I wanted to use a magnetic mount for my cr18p, but none that I found matched what I wanted so I made a set. My targets: use 10mm magnets (round or square). They can be up to 2.35mm thick. do not raise the body minimal supports required…
How it works → Fill with 1 teaspoon boric acid + 1 cup apple juice (or sugar water) → Wasps crawl in through the eight large oval ports, drink the bait, drown or carry it back to the nest → colony dies → Screw-on lid makes…
I have designed a replacement for my juicer krups.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm Swap Instructions: Start with Black At layer #7 (0.58mm) swap to Jade White At layer #14 (1.14mm) swap to Black At layer #15 (1.22mm) swap to rojo for the rest.
It's the end of the month and you've got a few drops left in your vape bottle ... This stand can help you ;)
Simple juice box holder for the kids, lots of them to find online with logo's/designs, i just wanted a simple quick print. 2 types, 70mm and 90mm high, insides are 40mm by 54mm, standard juicebox size here.
Upsidedown shampoo holder making it fall to the head where it is dispensed. Always ready for the next use, extra 3 uses of the same bottle guaranteed. Those last drops haven't seen this coming! Diameter of hole 32mm, height of the model…
This is just a nice way to carry your bottles of juice while keeping them organized. Also looks nice on a tabletop. All 3 models have the same swoop in the back. I just haven't printed the new version of the 4 and 5 bangers. I printed…
