Counting matching models…
The Solder Scroll makes soldering more ergonomic by allowing you to just scroll on the pen shaped tool to add solder. By rotating the knob, the tool can be adjusted to accomodate different diameters of soldering wire (0.3 - 1.5mm). A…
Phone holder allows for fine control of tilt. Probably overkill for some uses, but think this might be useful for video chat or work conferences where you want to get the camera angle just right. Link to adjustment demo GIF:…
It is a simple mechanism that provides column-like support for structures that require it. The support has a dynamic height that can be adjusted in place of use to lock it. To change the support height, fix it with your hand on a surface…
A handy tool to help with soldering, de-soldering, or other tasks where you need a steady third hand. This is a fully printable design, so no other hardware is required. With the largest base (as shown in the pictures) the clamping…
Check out the redesign with easier to print hinges and a better latch design: https://www.printables.com/model/1252247-just-in-case-print-in-place-pun-box I was following a tutorial for print in place hinges and saw a similar item on…
Update A loading funnel is now available as well, download it here ! Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me…
Update 1: Added a version with a longer front lip that fits better if your monitor has curved or thick bezels and fixed the weird slicing bug that added strange lines on top of the model. Update 2: I now recommend printing the…
3D Printable Party Glasses Key Features: Shutter-Style Lenses: The horizontal slits allow for partial visibility while maintaining the bold design. Easy to Print: No supports, just 20g of filament needed, printed in less than an hour.…
Closed feet height = 50 mm Extended feet height = 80 mm Tested with PLA: 0,15 layer height; 15% infill => 75+kg load per feet was no problem :)
ChopstickCheaters to let your kids eat with chopsticks. Easy and fast print and a lot of fun! V2 now prints with no supports. Use PETG to be able to put them in the dishwasher. PLA works fine but may not stand the heat. Made for…
Lets you drill into something at a specific angle. It's quite small, the guide hole is 8mm. Optional: add an M3 screw to lock it in place. Or else it will just swivel around. Assembly Instructions: see gif
I do a reasonable amount of flying for work and it has always been a pain holding or propping up my phone so I can watch movies. I tried some low-tech methods over the years but this design is my current solution. I got inspiration for…
Edit 5/18: Changed license to comply with the original Edit 7/4: Added additional folding parts for rigidity and improved clearances. Very thin folding phone stand that can slip into a wallet or the back of a phone case. Works fine with…
This is a stylish laptop stand that allows you to use the computer at 4 different angles but also allows you to completely fold it for easier storage and transportation. Print two pieces and place them underneath your laptop. You can…
Recently I designed a very rugged Tablet Stand for a Tradeshow booth that used quite a bit of unique hardware. After posting the design on Reddit and getting feedback, I decided to try and duplicate the design without using any hardware…
Multipurpose legs. They adjust in height and angle. Perfect for adjusting the angle of projectors. (The legs in the photos have been attached with thick double-sided tape.) A slightly curved section is included for easier attachment to…
If you want to support me you can now nominate me and my designs for the Printables Awards 2025! :) Height-Adjustable Feet with Ball Joint — M20×2 Thread (Heavy-Duty, 75 kg Load Tested) These height-adjustable feet are designed for…
Useful for finding the right distance of the Super PINDA from the print bed. The optimal distance for the Super PINDA is about 1.5mm. That should get your optimal Live Z/first layer calibration to somewhere around -1.00, so you'll have…
Just Bunny Figurine Read.me! Fast and lightweight print. Very little supports - very easy to remove. Printed with Fuzzy Skin effect. Fuzzy Skin: Contour Fuzzy Skin Point Distance: 0.4 Fuzzy Skin thickness: 0.2 As always! The key to…
Big and strong furniture leg. Its height can be adjusted after installation, from minimum 70mm to almost the double. Needs 4 M6 or M8 screws to be mounted. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: No…
I have uploaded a new file with the updated main body, and also a new screw with the file name "screw update." Someone pointed out that they were facing a problem screwing the parts together. Because I only designed half of the part and…
Vertical Laptop Stand Cradle up your laptop vertical and get your desktop neat. Designed for laptops and IPad/Tablets, put two devices on the stand at the same time. Adjustable Model the exported modular stand consists out of the base and…
*UPDATED the screw thread Adjustable self-watering spike for indoor and outdoor use. By using a plastic bottle you can provide the garden plants with an adjustable drip irrigation system. By turning the valve you can adjust and control…
Elevate your recording and gaming setup with my Customizable 3D printable microphone arm with adjustable joints and easy assembly for improved gaming and audio setups. Adjustable The joints can be adjusted in 10 degree intervals where…
This model has been updated with a V2 version that requires M3 hardware! A .STEP file is now also included that you can use as a starting point for custom dovetail add-ons. Thanks to @bequ3 for his comments and improvements ;) I needed a…
Ones assembled, the Cube is locked and can only be disassembled with a trick: Spin it really fast! Size: 35mm - DO NOT scale - won't work well. Comment if you want another size :) Print with: No supports Elephant foot compensation: 0.2mm…
Release of the 2021 version (v4) Completely redesigned from scratch but kept most of the v3 design. I've done some extensive testing on all parts and the complete assembly so I suppose it would be fine to print. However if you experience…
The files here maximize the usage of the print bed from the AnkerMake M5 (235 mm × 235 mm)) and M5C (220 mm × 220 mm) printers to print the honeycomb storage wall. New to the honeycomb storage wall? Look Honeycomb storage wall by RostaP ,…
About This is a funnel for easily filling the Adjustable Spool Holder for Silica Gel / Spool Weight with silica gel. It also fits the hygrometer version of course as it has the same lid dimensions. It was designed so it can be easily be…
Edited 09/27/2026 By user request, I added PIP clamps in 42 mm, 44 mm and 46 mm diameters. They are available only in the unmarked version, in the Pipe Clamps (second version, PIP, unmarked) folder. Edited 06/06/2025 I’ve added a custom…
After seeing many people's problems with my previous fidget switch' s spring, I decided to create a new variant that allows you to adjust the spring's tension whenever you want. Some days you may want a soft, tactile click; other days you…
Printing recommendations: FILAMENT TYPE TPU 85-A INFILL 25% WALLS 1 MM LAYERHEIGHT 0.20 MM Original designer: This is an articulated mouse. It can move its head and its tail. No assembly needed. It prints already assembled…
This is my first try to make a parametric model, this means you can change the model's size by changing a parameter. For this you have to open the .f3d-file in Fusion360. Then go to the “Modify”-menu and click “Change Parameters”. There…
Adjustable Feet Practical adjustable feet, perfect for DIY projects, cabinets, tables, or 3D printers. The threaded design allows you to easily adjust the height and keep your furniture or machines stable on uneven surfaces. Versions…
An adjustable LST clip that locks into place. I've designed to minimize the number of overhangs. I recommend printing with supports with overhang threshold set at 40 degrees or less. Supports should only be needed on the bottom of the…
Very detailed instructions can be found in the PDF file under “Other Files”.
This is an adjustable gantry mounted nozzle parking spot and brush for Vorons (2.4 & Trident) using bambu lab's silicone wiper. New Version! Now made more modular and using high temperature silicone RTV to further improve nozzle heat…
Whether you need a small adjustable holder for a pocket light or a new mount for your microphone, this model does it all, is adjustable (mechanical lock, not a friction lock) and clamps right onto any surface. Should be able to carry…
Description Adjustable GPU Support Bracket This universal GPU support bracket is designed to provide stable support for heavy graphics cards, such as the RTX 4090, and prevent them from sagging or damaging the PCIe slot. The support…
You can print and use this to replace existing adjustable bed frame support, which is usually made of weak and thin material. I recommend to glue a piece of rubber to the foot to avoid any noise. 0.3mm, rPETG, 5h.
Update 18th May 2022 16" Tablet version added, requested by a printables user, untested yet. This version needs at least 300x300mm bed size 3D printers like Creality CR10. Including in the folder V1 and V2 front braces. Old V2 legs will…
Just a simple hair band with “teeth”. I printed a bunch for my wife, in multiple colors. I used PETG and 0.2mm height with enough perimeters to have them print solid.
I was looking for a fully 3D printed AR style butt stock, but couldn't find a decent option that I liked. So, I designed this one. I hope you like it. It fits on a standard mil-spec buffer tube, and it also fits on my own designed buffer…
A book or comic book display stand so you can proudly show off the best of your collection. Print two of the legs, and one horizontal bar as seen in the pictures, easily breaks down and comes together again making book display simple.
BACKGROUND More than 10.000, of 3D printed mini-sculptures have been handed out to world leaders, delegates and bystanders at COP30 Climate Summit in Brazil, Stand With Greenland Protest in Denmark, Munchen Security Conference in Germany…
Version 2 is available here . It is stronger and stacks even better. This box is designed to be printed in vase mode for high speed printing. It is 125mm x 125mm wide and 70mm high. I used my Bambu Lab P1S with a 0.6mm nozzle. The grooves…
The height of the leg can be adjusted from 43 mm to 71 mm.
…Please be sure to hit like & post a make, I'd love to see your prints! Here's the SV06 PLUS Vortex V2 system with adjustable height for use with either the Sovol stock nozzles or regular Volcano nozzles. Also this attachment method…
3 spline locking joints Fully 3d printed. Locking taps built in to hold the pad in holder. Will be a snug fit. Recommend Slicing Tolerance set to Exclusive. Frame mount>Arm 1>Arm 2>Pad Holder I would recommend supports on the pad holder,…
Printable accessory developed specifically to enable you better viewing angles with Adjustable Thermometer bracket on your Original Prusa Enclosure. To mount the Adjustable Thermometer bracket you will need the following fasteners*: M3x8…
This remix of the original chain link bracelet is slimmer and thinner, yet still provides enough space to showcase eg. the carbon pattern. The smoother design reduces skin friction for more comfortable wear. It offers a stronger assembly…
I live an an apartment with ancient warped parquet flooring and my Lack based printer enclosure kept wobbling about. I designed these height adjustable feet as a solution! I used 3 perimeters and 20% percent infill at 0.2mm layer height.…
Summary This is a 1:24 sclae model of car lifter in a kit card style. They also fit the 1:24 models I have published. Can also be used for 1:18 scale models. After printing, the model can be assembled with the help of integrated…
I remixed Petr Vacek@PetrVacek_20701 's awesome model to accomodate my kitchen which needed new legs. Includes clips to attatch a plate beneath the kitchen cabinets, and also a wrench for easy tightening while the leg is under pressure.…
PPW Mk1 Self-Adjusting Gripper Plywood/Panel Carrier Clamp Effortless Panel Transport: Experience unmatched convenience with the PPW Mk1 Gripper Clamp, designed to streamline your workflow and make panel carrying a breeze. Its innovative…
Each half of the stand is 30mm wide to help promote stability underneath the laptop or tablet. There are 2 frame versions that are cross compatible with all v2 Feet and provide slightly different angle options. v2 is a Right Triangle…
Slot in the back for a 60x10x3 bar magnet . No supports needed. Simply break off the included support pieces
I'm adding a tool for fine-tuning the focus of the OV2640 camera module. Currently, I have designed a bracket only for the first 3 commonly used lenses for the OV2640. Support for OV8225 camera lenses will be added in the future. WARNING!…
This stand fits Laptops up to 17'', one size fits all (tested with 17'' and 14'' devices) The base does barely fit on the print bed of a i3MK3 - you have to rotate it to the diagonal. Further, add some more perimeters for the bolt and the…
Tired of phone stands that sag under the weight of an Ultra or Pro Max smartphone? This Gravity Desk Station is a heavy-duty, professional-grade solution designed for maximum stability and precision. It uses a smart mechanical linkage to…
Adjustable Support / Furniture Leg Introducing the versatile and durable 3D-Printable Adjustable Support / Furniture Leg, designed to cater to the needs of DIY enthusiasts, professional carpenters, and general consumers alike. Perfect for…
Keep your tape rolls organized with this adjustable tape holder designed for the IKEA Skådis system. This versatile holder fits tape of all sizes, making it a practical addition to any home setup. The design includes two side arms with…
This model is inspired by the Desk Bag Hook from PieSupplies . This variante is more rounded and offer an additional hook. The FreeCAD source file with some parametric options is attached. The photographies display the model desk_hook.3mf…
I printed the STL "original" with an Ultimaker 3 Extended in PETG/PLA. You can print the STL "optimized4print" easyer without PVA.
Use it to anchor a door or window in any position. It uses a clamp-like mechanism. Screw the bolt to make a friction with a perpendicular to the door surface. A door can still be fully closed with a mounted stopper on it. Just unscrew the…
A redesign of Zach Freedman's jumper wire comb so it doesn't require magnets. Should be fully compatible. The included picture shows both my comb and Zach's original in one of my bases. Changes: The base is one piece, rather than two. The…
Yes, here is my 100th template :-) This is a modification of the template from : "Adjustable Folding Phone Stand - Single piece print, built in hinges" https://www.thingiverse.com/thing:3041592 What else have I done? The template can be…
Adjustable utility knife Vertical and horizontal versions + 2 Self Tapping Screws M2.6 L8. Horizontal versions: Vertical version: Use 2 Self Tapping Screws M2.6 L8. Note: Follow safety precautions when working with a blade!
Furniture legs with two heights to choose, 25mm adjustable to ca. 35mm and 55mm to ca. 80mm. (I recommend checking out the redesigned model on my profile with more heights available and improved threads)…
This is an adjustable print-in-place spool for filament samples. No assembly needed, just remove from build plate, snap off the built-in supports and you're good to go. How to use: Adjust the arms inwards until you can fit the sample roll…
What is it? It is a height adjustable table with basic dimensions (length x width) of 225x200mm. The height can be adjusted from 115mm to ~ 200mm with a crank. The table is sized so that it can be printed on the most common printers such…
Adjustable phone mount for the Moza R5, R9, and R12 wheel bases. Can be set at 6 different heights and can be adjusted to hold phones up to 175mm x 13mm. Uses M4 hardware for assembly and M3 to mount to the base. Note that…
Print each half to lie on its end so that no supports are required. When printed slide both halves together and adjust size. Side and back lips go under vent register so no magnets are required.
I wanted to make a nice desk ornament for somebody who recently started working in law offices for Oklahoma's Indigent Defense System and found jimjimjimmyjim's “old lady justice - statue - gubbins” model on Thingiverse. jimjimjimmyjim…
Adjustable ruler positioning block. Highlights: Fits rulers of different sizes. Fully 3D printed, no hardware required. Just add ruler. 90° and 45° angles. Use as depth gauge, tightening nut secures measurement. Printing Tips: Model is…
This project is currently in BETA (as of April '24) Specifically, the longevity and durability of the PLA+ printed locking pin needs to be further tested. UPDATE: A new experimental Reinforced Locking Pin has been added to the print…
A phone holder with adjustable inclination. It firmly holds set position without needing to engage any locking mechanism. Prints in place with no supports. The initial turn takes a little bit of extra force. Do not over torque the…
Adjustable leg for your furniture or shelves. The holes for attachment are 4mm in diameter. The height of the foot is possible from 7 to 12 cm. The leg is adjustable even after loading with a 25mm wrench.
You can use 1 or multiple of this screw to prevent wear on the PCIE slot for your GPU. It will not melt if printed in PLA.
This is a basic height-adjustable shooting rest using a screw-and-locknut adjustment. It is designed such that no brims, supports, or rafts are needed to print. There are four components, but you will print a total of five parts. The…
Download Bust of Superman kills The Joker Injustice League STL for 3d printing by CG Pyro fanarts This bust is part of the Superman Kills the Joker package which is a diorama in 1/6 scale and scalable without problems to 1/4, you can find…
1:10 RC chassis with adjustable wheelbase, and flexible suspension. How to build it See pictures and fusion 360 assembly drawing. There is color code bolts. Green - 8 mm bolts Yellow - 12 mm bolts Black - M3 nut Filament Prusament PLA -…
KEYBOARD OR TABLET STAND 14 Sept 2024 - New design available :- Desktop Tablet Stand and Organiser by Peter Martin | Download free STL model | Printables.com Decided to design a keyboard stand, a few iterations later this is the result. I…
Was told by my wife to finally do something with those godamn lids, so... Enjoy :) Print instructions Category: Kitchen & Dining
Add a new feature for for the Adjustable PCB Holder Tool, to complete with another use for the soldering station. These cable clamps (clothespin) can help you at soldering cables. Attribution: Remix for the Adjustable PCB Holder:…
Look for all information and recent models on https://www.thingiverse.com/thing:6574108 .
Print Settings Printer brand: Bambulabs Printer: Bambu P1P Rafts: No Supports: No Resolution: Nozzle 0.40mm / Layer Height 0.20mm Infill: Gyroid 15% Filament brand: AzureFilm Filament color: Neon Red Filament material: PLA Notes: Printed…
Update June 12, 2023 A loading funnel is now available as well, download it here ! Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs…
With stay-at-home orders in force, more people are forced to work , or learn, at home. This may mean spending more time online as services and interactions migrate to the digital realm. Good computer posture is important, but can be…
Pipe burst and water spraying out all over the floor? Don't call a plumber, simply download the attached STL files, and in just six short hours you can fix your own leaky pipes with this quality wrench constructed of super tough and…
A unique take on the laptop stand. It prints in place, with very sturdy hinges and is adjustable to multiple angles. Its primary usecase is raising the laptop off the table, while still being more than portable enough to always have…
After I finished the Simple Perfect Desktop Fan Stand I wanted to make one that is adjustable. So here it is. Features No Supports / Super easy print The angle locks every 5 degrees Customizable text at the front No additional hardware…
20-5-2024 parts have been updated for a better parts fit _________________________ Compatible with both the FGC6 MKI and MKII models (SF bolt checked: works with the SF bolt ) this butt stock is adjustable to a size from 220mm to 295mm.…
An adjuster for nylon straps commonly found on backpacks. This one fits 25mm wide straps.
Summary Dinky little toy blaster. it shoots about 30 feet, is pretty small and is made out of purely printed plastic and two rubber bands (One for the trigger and one for the magazine). It requires no fasteners, or glue, and just uses…
Do you want the whole kit printed for you in high quality carbon fiber PETG? All of the hardware included so you don't have to source small quantities of obscure brass inserts? You can now get the kit here: ►…
Adjustable belly stand for the Steam deck. tried both 20% and 100% infill and they both work fine
A bottle cutter that uses 608ZZ skateboard bearings (8x22x7mm), and US pennies or 5/16 washers to adjust the cut width. Parts 2, 608 bearings (8x22x7mm) (Grind at least one side flat to use as a shearing surface. I used an angle grinder…
A height-adjustable holder for grow LED lights to be attached to a planter box. And aluminum LED profile slots in to the top segment. The bottom piece just clips on to the planter box. It's fairly loose in my case, but once the arc is…
They can be assembled with binder clips to form different sizes of rectangle and different sizes of squares by different combinations for different size molds. Can be stacked to make taller mold.
