Counting matching models…
A 3d printed replacement left foot for the Logitech K280e keyboard. This contains the model for the left foot, but you should be able to mirror it to get the right one as well. I recommend printing this with PETG if you have it, because…
A robust and sturdy 3D Printable Build Platform/Heated Bed Standoff for the He3D K280 Mega Delta and many other delta 3D printers built with 20mm slotted extrusions. The design replaces the adjustable spring standoff supplied with the…
I assembled a HE3D K280 and found the glass bed has no brackets. The pictures I've seen online of folks using it show them taping the glass down with masking tape. So I came up with some small brackets that fit every other hole around the…
I wanted my filament sensor to fit below my extruder precisely. This mount let's it fit with a straight filament path on the 2020 rail. Print Settings Printer: HE3D K280 Rafts: No Supports: No Resolution: any Infill: 20-40% Post-Printing…
My second hand SK280's original sinker plate rubber wheel broke, so I whipped up a quick replacement part, and printed it in eSUN TPU-95A , and it works so far. Let me know if you have any issues with the model, and I'll try my best to…
Simple corner infill plates for any Kossel with a 310mm bed and 360mm extrusions on the vertices. Designed for my HE3D K280. My bed is about 1cm above the frame rails, so this matches that level. Underneath there is a large cutout running…
My Take on a clamp for the E3D V6 hotend on a standard He3D K200/K280 effector plate. This is designed for a 1/8" thread Bowden coupler (Like this: https://e3d-online.com/threaded-bowden-coupling ) mounted in the upper part. You could…
Replaces the stock injection moulded slider clamps of my He3D K280 kossel delta; the stock item is actually fine, but this version has a simple adjuster mechanism, and is sized for a 9mm belt upgrade I made. Updated with 4 new Models…
This holds the heated bed in place. The heated bed should be ~100 to 110 degrees, max, which should be fine for PLA+. I wanted something as low as I could comfortably get (so now you can go from 600mm to about 625mm height). And something…
My second hand SK280's original sinker plate rubber wheel broke, so I whipped up a quick replacement part, and printed it in eSUN TPU-95A , and it works so far. Let me know if you have any issues with the model, and I'll try my best to…
I wanted my filament sensor to fit below my extruder precisely. This mount let's it fit with a straight filament path on the 2020 rail. Print Settings Printer: HE3D K280 Rafts: No Supports: No Resolution: any Infill: 20-40% Post-Printing…
I assembled a HE3D K280 and found the glass bed has no brackets. The pictures I've seen online of folks using it show them taping the glass down with masking tape. So I came up with some small brackets that fit every other hole around the…
the leg of my keyboard broke, I couldn't find where to buy or print the same one, so my friend Dmitry and I made them ourselves based on the drawing from a whole leg. ----- !!! WARNING !!! ----- We encountered a problem that the…
A very simple PSU mount, using the extra brackets and bolts that came with the K280 HE3D. I added an optional plate for holding the power cable, and allowing the inclusion of a standard aliexpress power switch (~19mm x 9mm) Installation…
Simple corner covers, just because they look nice, and helps keep dust out of things. Installation Notes Just print and pop-in place. Kit Items This is part of a complete set I created for my K280 / HE3D and should be compatible with…
These are simple little glass clips to hold the K280 glass to the metal bed. Installation Notes They have little “teeth" that help them bite into the plate or glass. I'm not sure how consistent they are (HE3D) for glass sizes and such.…
A simple, quick, easy to print spool mount for 20-2020 arm 3D printers. Installation Notes Contrary to some of the photos, mount it either low, or sideways, so the running motor arm things don't hit it going up and down. Test it by…
I won't go into the full detail on this one. I tried using a quick release firm bed, and that works pretty well, but it could be a pain for calibration. At the same time, I didn't want that weird spring calibration system that it shipped…
The normal fan thing for the K280 sucks and I wanted a better one, so I remixed this from an A20 fan thing
This fits a single extruder K280 / K200 HE3D printer. I however have a double extruder, so I'll need to make a small adjustment later to fit it on a double headed unit. That said, I want this airflow because it is killing the K280 :D
I just remixed another LCD delta design. Stronger angle so its easier to see with the K280 Changed how it bolts to the LCD (works OK) More of a hex designStronger angle so its easier to see with the K280 Changed how it bolts to the LCD…
I just wanted a simple LCD mount that's easy to mount on a K280. Sorry for this mess of a modelling job, I was lazy and didn't worry about quality and overlaps - because I figured I'm the only person likely to use it. All the same it is…
A 3D printable robust and durable Spool Holder for the He3D K280 “Mega” Delta 3D printer and other RepRap Kossel derivatives. It should work on many other delta printers made from aluminum extrusion, including the He3D K200. The spool…
A 3D Printable light, durable and efficient U-Shroud Parts Cooling Fan Mount for the He3D K280 Mega Delta, Kossel or other similar RepRap 3D Printers, built with 20mm slotted extrusions. The design provides adequate cooling of the part…
