Counting matching models…
Support my work by leaving a like and follow _ THANK YOU ! Get early access to more models on my Patreon Video : https://www.tiktok.com/@body_3d/video/7044484144780299525 Articulated Dragonair is already on my Patreon ! Click on the…
Kansas City Chiefs Magnet Arrowhead 1st Layer White 2nd Layer Black Alt Logo https://www.printables.com/model/397800-chiefs-logo-alternate
Have a friend who is a huge KC fan and asked me to make him something up. So if there is anymore Chiefs fan here is is. There are 2 files here one with border (same one in the Picture) and one without the border Print Settings Printer…
Mit dieser neuen Version von meinem beliebten Zollstockanschlag ist es nun möglich nicht nur das erste Glied zu nutzen, sondern alle weiteren auch, da er sich nun über das Gelenk drüber schieben lässt. Der Anschlag ist ergonomisch geformt…
Here is the awesome looking Kansas City Chiefs Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. Want a Commercial License to sell my prints? Join my Patreon or…
Important! Ensure files are oriented correctly, they should look correct when viewed from below the build plate. This may require mirroring the parts. setting the coordinates to 0, 0, 0, should center them properly. A flat version of…
Magnet of the Kansas City Chiefs Logo. It is designed to fit 6mm x 3mm magnets. Base layer should be black. G-CODE has four layer pauses: 3.8mm: add magnets 4.6mm: color change to white 5.4mm: color change to black 6.4mm: color change to…
Arkansas, USA (AR) Topographic Relief Map with Rivers and Coastal Waters Arkansas, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of Plastic…
Hier eine Griffvariante mit Schwenksystemanschluss bei ansonsten gleichem Grifftyp ;) Innen gibt es einen Hohlraum damit die Kamera im Wasser oben schwimmt.
The Vince Lombardi Trophy with (non-official sized) NFL-logo and Kansas City Chiefs logo with Superbowl LVII 2023 watermark. Ball printed seperately and then glued together. Print the stand with support for the logos. Remix of various…
Features Receiver has been slimmed down to fit the shroud Two-tone shroud with full length picatinny rail Optional M3 brass inserts for bottom rail, for a bipod Stock is a bit barebones/minimalist, since I wanted it to be printed as one…
Multimaterial remix inspired by make by Truji .
Prusa Affiliate link: http://www.prusa3d.com/#a_aid=3090 Feel free to check out my website https://www.ar3dprints.com/ All print information is included in a txt file. Hope you enjoy!
Here's a simple Kansas City Chiefs coaster set for your enjoyment. This was printed on a Prusa MINI which allows for filament changes during the print in order to print with multiple colors. PETG 0.2 Layer height
This is the Kansas City LDS Temple. For resizing reference It's 10cm long. If you use the right filament it can be lit up as shown in the picture. I was happily impressed with the results. Print Settings Printer: Anet A8 Rafts: No…
The Vince Lombardi Trophy with (non-official sized) NFL-logo and Kansas City Chiefs logo with Superbowl LVIII 2024 watermark. Ball printed seperately and then glued together. Print the stand with support for the logos. Remix of various…
Kansas, USA (KS) Topographic Relief Map with Rivers and Coastal Waters Kansas, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of Plastic…
In your slicer you will need to add custom G-code to pause the print, or in Orca/Bambu you can select to add a pause once you slice the image and use the layer preview slider and insert pauses at the layers listed below. Print at 100%…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
I designed this file to be printed with a Bambu Lab printer with AMS. It is an easy print that does not take too long
Remix of jasonalt529's great looking Vince Lombardi trophy. I only remixed the stand, the football STL remains unchanged. I recommend printing with the trophy leaned 45 degrees towards the back. This does not require you to activate…
New additional Kansas City Chiefs Champions coaster Beer mats/Coasters for the 58th Super Bowl with the San Francisco 49ers playing the Kansas City Chiefs. Each coaster has the badge of each of the teams with the Super Bowl LVIII logo…
Kansas City Chiefs Earrings Layered to print with color change. No ams needed. Can be scaled up for a keychain. Please "Like", review, follow and upload make. I spend a lot of time designing and allow it all to be used for free (including…
Reupload from spondoro on Thingiverse. Coaster featuring KC chiefs logo. Use a color change midway for a nice effect.
this is a cookie cutter I made for a friend. makes a cookie thats approx 4.5in wide, 2.5in tall. I print it at .28 layer height and default settings. I used Cookiecad to make this cutter.
Kansas City Chiefs Logo Superbowl LVIII 2024 https://www.thingiverse.com/thing:6481779 Category: Sport & Outdoors
i designed the holder not the coasters .the link to them is in the description link to coasters https://www.thingiverse.com/thing:4967577
With the Kansas City Chiefs in the Super Bowl again, here's a coaster for this perennially good team.
Magnet of the Kansas City Royals Logo. It is designed to fit 6mm x 3mm magnets. Base layer should be white. G-CODE has three layer pauses: 3.8mm: add magnets 4.4mm: color change to blue 4.8mm: color change to gold
Magnet of the Kansas State University Wildcats Logo. This model has holes for 6mm x 3mm magnets. Base layer should be White. G-CODE has two layer pauses: 3.8mm: add magnets 4.4mm: color change to Purple
Easy to print keychain, can be printed with multiple colors.
Alabama Crimson Tide logo that I designed for a necklace. I hope you enjoy!
Low poly Ekans, the serpent Pokémon. A simple yet iconic Poison-type model for collectors.
www.patreon.com/bkprint3d
Introducing the Kanso Ribs Vase —a masterpiece of minimalist design that perfectly embodies the Japandi ethos. "Kanso" means simplicity, and this vase lives up to its name with its smooth, rounded form and delicate ribbed detailing. The…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
Extended the frame plate to secure the bottom handguard to the rest of the frame. Created a custom angular mag (6 dart capacity). For the extended frame plate use two M3x8mm screws after drilling 2mm holes in the bottom handguard. Use the…
This wall mounted logo was designed so that I could have a modular Kansas City Chiefs logo and incorporate the KC skyline. After designing the skyline logo, I created a second insert that removes the skyline incase people just wanted the…
A simple 6mm firesteel holder for the basic Morakniv Kansbol sheath, simply clicks to the slot at the back of the sheath. A firesteel on photos is held in place by a rubber band cut from the old bicycle tube. Print with 10perimeters to…
Kansas State University Coasters with three different designs for MMU printing. Also includes a holder for six coasters.
I printed in four parts (see .3mf file).
Kansas City Super Bowl Plaque 2024
for y'all hog fans out there University of Arkansas Cookie Cutter
A lasercut Kansas City sign in the style of the sign on top of the Western Auto Building . I used 3 mm (1/8") baltic birch plywood and 3 mm red and white acrylic. Post-Printing Glue the letters and arrow pieces to the sign. I used a gel…
Dimensions are 45x45mm and 3mm thickness, with color layer change at 2.8mm
Kansas City Chiefs Koozie. If you print it post your make! I would love to see it.
Kansas City Lightbox Short top Included is the studio files. On the back in the studio file is a hole to hang and a hole for light plug. Please "Like", review, follow and upload make. I spend a lot of time designing and allow it all to be…
Kansas City Royals cup coasters. Layer 0.0mm Royal Blue Layer 7 / 1.4mm White Layer 12 / 2.4mm Gold Layer 17 / 3.4mm Royal Blue I used: Sunlu PLA Blue iSANMATE HS PLA+ White HatchBox PLA Copper Original Chiefs coasters from Thingiverse:…
Made for my brother. Hallow inside, used ironing
Kansas Jayhawks Oversized Necklace Logo that I designed. I hope you enjoy!
Simple but unique candy bowl or whatever bowl you want it to be.
This logo was made by a true KC Chiefs fan for other people to enjoy. It is also on an Xbox One S Controller Stand. I hope you guys enjoy this file. If you have any requests for other things for me to make, just tell me, and I will try my…
Kansas City Chiefs Oversized Necklace Logo that I designed. I hope you enjoy!
Arkansas Razorbacks Oversized Necklace Alternate Logo that I designed. I hope that you enjoy!
This is a Shinkansen-rocket toy model for my children. It was produced under the influence of the following post. https://twitter.com/sado_kouta/status/1709158854850654271 My post is here. Please enjoy!…
Cake toppers I made for our Super Bowl party. Print the small pieces face down for better finish and also ironed the top layer of the large black pieces. The g-code is already compiled that way.
KC Chiefs Lid Topper for 40oz Stanleys! Free for personal use; no commercial use allowed.
You can use any colors you'd like but I used: White PLA 0.0mm Gold PLA 3.2mm (Layer 16) Blue PLA 4.0mm (Layer 20) 6mm magnet holes on the back.
You can use any colors you want but I used: Silver/White PLA 0.0mm Black PLA 3.2mm (Layer 16) Red PLA 4.0mm (Layer 21) 6mm magnet holes on the back.
My friend asked for some Arkansas-themed earrings, and these are the first ones I have designed. It took me entirely too long to figure out Tinkercad, but here it is. I hope you like them! I will be adding other versions soon! Update Jan…
Here is a great gift or personal treat: Kansas City Chiefs Car Rearview Mirror Ornament Hanger! Had fun designing this and planning to make all NFL teams! Feel free to add a picture if you print! The elastic string I used for this print…
I wanted to make a Kandi bead for the Force Fields edm festival. Given it's Wisconsin, I decided a cow! Print flat, no supports, multicolor .3mf included. Category: Jewelry
Here is the awesome looking Kansas City Royals Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. (Chain Used:…
Bring your favorite NFL team to life with this oversized Kansas City Chiefs logo! This model was designed with clean details and printability in mind, making it a fun project for football fans, collectors, and makers alike. Whether you're…
Remix of Kansas City Chiefs coaster to make it a keychain.
Merten OctoColor Zentrallplatte für UAE-Einsatz, 2fach Netzwerkanschluss
This is a repost of a model by peterpeter on cults, link below: https://cults3d.com/en/3d-model/tool/arkansas-tower-topper I really like this model and it was very generous of the creator to keep it free despite the detail and effort that…
Kansas State Wildcats Oversized Necklace Logo that I designed. I hope you enjoy!
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
Arkansas SEC Logo (Work in Progress)
Use any color combo you'd like! I have been having fun making different designs to go with the large chains I found, everyone loves them! Chain I used can be found here:…
This is a holder for a JetPens exclusive Kanso Noto notebook. For those who don't know, the Kanso Noto is a notebook filled with delicate paper for writing on with fountain pens. It can be found here ! Since the pages are so delicate, I…
I included a version with and without the hook so make sure to pay attention to which one you download.
My original idea was to create a small box that I could stick some LEDs in… haven't made it that far yet, but this turned out to be a nice little décor piece. If you do want to try this as a light box, I would recommend increasing the…
Made for the board game Trains (as score markers). Made by a friend, but I have permission to upload the model. I chose to scale the model by 150% in the width and height dimension, to make it a bit bulkier. Also made for Trains: Track…
This clock celebrates the Kansas City Football team in the US. It is designed to fit on an MK4 and does not require an MMU. A Fusion 360 file is attached to enable remixes and adjustments. Layer height 0.15 mm. I used Nano Polymer…
Kansas City Royals switch cover
I printed this using an Elegoo Neptune 4 Pro. It fits perfectly with the Xbox One S Controller and other compatible sizes. If you have any questions or requests for different things, don't be afraid to reach out. Thanks for your time.
Mount for Parker's Adjustable bipod for the Shinkansen Smiley. Makes use of the holes in the front end for heat set inserts. It's designed for m3 screws, length dependent on the type of heat set inserts you put in. Please check the…
I wanted something Kansas City Current with all the hype and new stadium here in town so I made this. This isn't the exact colors but close enough for my use. There are magnet holes in the back that are 6mm. I also included a sign version…
Shout out to my neighbors in Arkansas (I live in Texas)
Kuća u mjerila TT. Tradicionalna dalmatsko-istarska kuća koja je najbolja za vašu modalnu željeznicu TT.
Kansas City Chiefs logo sign designed with single color printers in mind. Overall thickness is 5 mm. Designed to print with pauses to change filament color. White is the first 3 mm, Red the next 1 mm, with black being the highest layer…
Kansas City Royals Oversized Necklace Logo that I designed. I hope you enjoy!
This is a Tissue box cover that fits over a square tissue box for added decoration and can act as a night light. The cover snaps onto the light base. No glue needed for assembly. I hope you enjoy this item and follow me for more cool…
This is a cute little cookie cutter that will cut out shapes of the state of Kansas. Printed this in generic purple PETG filament with 0.2 layer height and 15% infill on a Prusa mk3s printer. ***Note: The .3mf and .gcode files contain 2…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
I needed a solid Arkansas outline for some custom keychains I was making and couldn’t find one so I made my own. Sharing it here in case it’s useful to someone else. Feel free to share your makes as I’d love to see what others create with…
Hi, this is the "Balkans" piece by the wonderful graffitti artist Causeturk. Check out his INstagram and show some love if you like what yo see. The print files are created by utilizing a lithophane generator (see the images). There are…
For all you Kansas City Chiefs fans. Category: 3D Printing
Original artwork by Marmaladeturtle Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #13 (1.12mm) swap to Yellow At layer #14…
This is a 3D terrain model of Petit Jean Mountain in Arkansas in STL format. The elevation is “exaggerated” to make it easier to see the geographic features. This model probably works best with resin printers. The model was generated with…
I always enjoy modeling in Fusion when traveling on the Shinkansen (bullet train). However, the tables on the Shinkansen are very small, only enough space for a notebook PC. So, I modeled a mini-table to extend the table. It has a raised…
A remix of the Shinkansen Smiley Stock that removes the big and small insert replacing both with a bigger opening. Optional QD attachment point INCOMPATIBLE WITH FPS ADJUSTMENT KNOB 2 versions, with or without the QD point
A Kansas State University power cat themed desktop clock designed for 35mm clock inserts that are readily available from popular online retailers.
Lenkanschlag für Canyon Carbon-Mountainbikes der Jahre 2016 - 2019
Kansas City Royals Retro Oversized Necklace Logo that I designed. I hope you enjoy!
Hueforge Images of both the front and back side of the 2024 Bowman Draft Jac Caglianone Kansas City Royals #BD-8 card from an image found on ebay. I also printed a couple stands for the prints from…
![GoPro Handle SwingArm [GoPro Griff Schwenkanschluss]](https://media.printables.com/media/prints/238205/images/2155985_64a6bf72-4d64-453e-9511-87a2b50933a1/griff.png)
