Counting matching models…
Jaw Protectors for Knipex 86 XX 250 and 86 xx 150. Print in TPU or PETG or even PLA. A little more flexible material may last longer. Update 29.3.2024: Added Fusion360 drawing on users request. Print Settings Printer Brand: Prusa Printer:…
Since there wasn't a Gridfinity bin available for the Knipex 97 52 36 crimping tool, I decided to create one myself. This custom bin is designed with a 2x6 grid.
4x0.5 Gridfinity Box to hold Knipex Tweezers. Can be printed in two colors (sepearate one for top surface) as shown in the .3mf file.
Halterung für: Zangen und Stifte Passend zu: S37x9 und Skadis Lochwände 8 Versionen: 2- und 3fach jeweils als => open - close - getrennt Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix Grundplatte 2" - B67 -…
Multiboard Holder for Knipex Cobra Pliers STL is for 87 01 250 (Cobra 250mm) and 86 03 125 (Mini-Zangenschlüssel 125mm) V2 is equipped with retaining lugs for secure attachment to the wall. To fit any sizes you can find a parametric Model…
Two separate holders for Knipex tools - the pliers wrench 180, which is probably my most used tool, and the old trusty Cobra 250. The Cobra holder does not hold the pliers completely vertical, which still could be optimized. It is however…
This is a remix of protective covers designed specifically for the Knipex Electronic Super Knips 78 71 125 – perfect for keeping those precision tips safe in your toolbox or on your bench. The design is based on the original cover by…
A simple and snug peg board attachment for Knipex 250mm Plier Wrench. Printed with right side down for optimal layer direction for strength of pegs with supports.
Needed an insert for my Knipex 71 02 200 Boltcutter Size: 6x1 standard gridfinity
The Model comes prealigned and shouldn't require Supports but will benefit from a Brim . The indented Areas can be used to Bucket Fill with Fuzzy Skin to aid in Grip when removing them. Personally I'd suggest printing a set of three or so…
The model can be printed upright. The neat thing is, it already includes supports - no need to make your slicer create your own. The supports will come off the model very easily - they might even fall off on their own when you peel the…
T-Nut pliers holder remixed down to 41mm width to hold the Knipex TwinGrip 82 02 200 Pliers.
4x0.5 Gridfinity Box to hold Knipex Tweezers. Can be printed in two colors (sepearate one for top surface) as shown in the .3mf file.
This holder is specifically designed for the KNIPEX 26 21 200 needle-nose pliers and mounts directly onto an IKEA SKÅDIS pegboard . The model keeps the pliers securely in place while allowing quick and easy access. The design is compact,…
This holder is specifically designed for the KNIPEX 70 (01) 125 diagonal cutting pliers and mounts directly onto an IKEA SKÅDIS pegboard . Print Settings Recommended settings for best results: Layer height: 0.2 mm Infill: 20–30% Supports:…
This is a recreation and remix based heavily on Spookniks tool holder for Knipex crimping pliers for IKEA Skådis (or Skadis for those not writing with the diacritic ring). The original only had room for one tool and it felt a bit sloppy…
Used the shadow created by @ds to create a 6u high version (with a label) that lets the stripper sit fully below the top
As none of the models I found really fit the ferrule crimping tool, I made a quick model to match the space of its grip. Print orientation shown in the second picture - I used tree support for the upper hook. Mine was printed in PLA as it…
As none of the models I found really fit this exact wire stripper, I made a quick and simple holder for it. Print orientation shown in the second picture - no support is needed. Mine was printed in PLA as it was the only white filament…
I recommend printing it from PETG or hard Flex material. The cutters are ment to be inserted with the tip pointing downwards.
Hang your tiny pliers wrench on any surface! Printed using PETG, no supports.
HSW comparable mount for the Knipex 12 40 200 Wire Stripper. Designed to bolt to the standard M3 insert with a M3 x 8mm or 10mm SHCS. Requires supports, organic on build plate only works great.
HSW mount for a Knipex 16 30 135 wire stripper. Designed to work with the standard small hexagon insert. Supports are required, but organic, build plate only supports work great.
Attach your Knipex Pliers Wrench to any surface! Printed in PETG with no supports. Use 4mm countersunk screws.
Knipex Mini Pliers Gridfinity bin 2x3. Fits Knipex 4" Pliers Wrench XS (86 04 100) and Knipex Cobra XS Water Pump Pliers (87 00 100) nested on top of each other. You can put either one on top or bottom.
This was inspired by (but not remixed from) There is about 29mm between the two posts and my Knipex Cobra Pliers 87 02 250 fit perfectly. It should also fit the 87 01 250 pliers as well. Connects to openGrid using the openConnect snap…
Gridfinity bin 2 x 6 x 4 for Knipex 26 12 200 needle nose pliers
Gridfinity bin 2 x 5 x 4 for Knipex wire cutters 70 02 160
Gridfinity bin 2 x 5 x 4 for Knipex Combination Pliers - 03 02 180
Knipex Insulated Tweezer 92 27 62 Gridfinity bin 1x4
Knipex Electrician's Folding Knife 16 20 50 Gridfinity Bin 2x4
Knipex Electrician's Shears 95 05 155 Gridfinity bin 3x5
Gridfinity Bin for a Knipex 7861125 Plier Body with extra inlay Easy to print Stackable Files Knipex Gridfinity Body Knipex inlay .step-File
Dieser Griff ist für die Elektro-Installationszange 13 86 200 konzipiert und kann aus regulärem PLA oder TPU gedruckt werden. Die Griffhüllen werden einfach auf die Zangenschenkel aufgeschoben und festgepresst. Hierfür benötigt man ein…
A simple holder for a Knipex 7861125 Sidecutter. Made for the Ikea Skadis wallmount. Uses the excellent T-nut system.
Remix it for our lovely Knipex tools. Got myself the TwinGrip aswell and need a holder for it next to my other Knipex. Not every corner is perfectly roundes as in the original but it totatly does the job. You can either print the one…
Knipex 3125160 needle nose pliers needle nose pliers Greifzange. 2x5 grids. See all my tools https://www.printables.com/@MatthiasHart_2387670
Scaled down version of Martin's design to fit the smaller Knipex cutter 72 01 140. Thank you @MartinMihalik_360019 !
Holder for the Knipex Pliers
Knipex Spring 35 99 01 One of the springs on my Knipex pliers (model 34 52 130 ESD) broke, so I designed a replacement and 3D printed it using polycarbonate (PC). Important It’s a tight fit, so you’ll need another set of pliers to push…
no support needed brim helps with adhesion problems tested in PETG-HF
These are a set of protective soft jaws for the smallest Knipex Pliers Wrench (model number 86 03 125). If you work on delicate items such as electronics you can use these jaw covers to protect whatever you are working on. These jaw…
Pegboard holder for knipex https://www.amazon.com/gp/product/B000X4KP1C KNIPEX - Pliers Wrench 7 ¼" version I use triton screws to mount my prints to the pegboard and they work great. https://www.amazon.com/gp/product/B0B169CQST
Thicker pins, wider tolerances, logo deboss, deeper cavity. I actually grabbed the pegs from the back from this model: https://www.printables.com/model/39597-pegboard-caliper-holder
Cover to avoid damage of parts by pliers. Designed for KNIPEX Cobra 150 (87 01 150). I printed these covers in PETG and PLA.
Akin to the original model: M2 T-Nut , M2 nuts and M2 12mm screws are needed for mounting. Measure your pliers around the narrowest part of the handle (where they're mounted in the pics) to gauge if these will fit your pliers. 35mm:…
Not much to describe. Works as pictured. If you're seeing the other Skadis holders in this image and want those instead, check my profile. Designed for use with T-slot nuts. I personally like these , but in theory you can use whatever.
Not much to describe. Works as pictured. Designed for use with T-slot nuts. I personally like these , but in theory you can use whatever.
Since there wasn't a Gridfinity bin available for the Knipex 97 52 36 crimping tool, I decided to create one myself. This custom bin is designed with a 2x6 grid.
This are Jaws for 300mm Knipex Tongs (87 01 300). these are for assembling and disassembling a syphon. Just print it out and glue the TPU piece in the 10mm holes. You also can use some 10mm round Rubber to make it grip nicely. The…
I printed it in PET-G from DevilDesign. It came out very well. My settings Nozzle : 0.4 Layer heigth : 0.2 Layer Width : 0.42 Walls: 3 Top / Bottom Layers : 2 Infill: 15% Supports : Yes
To attach holder to HSW use insert-with-M3.stl part from original Honeycomb storage wall and screw together with M3 bolt.
I wanted to put my initials in the KNIPEXtend spot and there weren't any models here so I made this one. If you're using the long version I suggest shortening it digitally or applying some glue to hold the end down. I have no…
Passend für Multiboard, siehe https://www.multiboard.io Halter für Knipex 125mm Zangenschlüssel - 86 03 125 Halter für Knipex 150mm Zangenschlüssel - 86 03 150 Mounting for Knipex 125mm Pliers Wrench - 86 03 125 Mounting for Knipex 150mm…
Kann mit einer Schraube in einem 5mm Loch an eine vertikale Oberfläche geschraubt werden und hält die Wasserpumpenzange
A non-stackable Gridfinity Container with an Inlay to store the Knipex 31-15-160 needle nose pliers. If there is interest, I could modify this for stacking. This is a two part design like @layercake's Super Knips design, so you can reuse…
I love the original but sadly one of my knipex pliers doesn't fit. So I made this wider remix. The original has 38mm inner space, this one 40mm. all credits should go to the original creator!
This is a small protective cover designed for the Knipex side cutter 78 03 125 (without lead catcher). When applied, the cover locks the pliers in the closed position, ensuring safety and convenience during storage or transport. Printing…
Ich habe diese Halterung für meine Wand entwickelt, basierend auf einem modularen Schienensystem. Die Schiene ermöglicht es, Werkzeuge wie die Knipex 78 03 125 sicher und flexibel zu befestigen. Die Halterungen lassen sich einfach…
Ich habe das Modell angepasst, um meine Knipex ebenfalls an das Wunderbare Schienensystem aufzuhängen.
This is a Knipex snipper holder that fits US standard pegboards with 1-inch hole spacing. I remixed a model that is for Skadis boards. The upper peg needs supports. I didn't use supports anywhere else. You may also want a brim as the bed…
Soft jaws for the small knipex plier/wrench 86 04 100. There jaws are ment to be printed with rigid materials (not TPU) and they snap in place with little retainer tabs. Category: Hand Tools
This wall mount is pretty simple, just print it and attach it with two screws to a board or a wall.
The print is very easy, the part is designed to be mounted from the backside with two screws.
I have provided some example models but it is best to measure the pliers and customize the design using FreeCad. The second picture shows how to measure it correctly. For customization open the project in FreeCad and select the object…
I have provided two example models but it is best to measure the pliers and customize the design using FreeCad. The second picture shows how to measure it correctly. For customization open the project in FreeCad and select the object…
A mount for the Knipex Electronic Super Knips electronics side cutter(KNIPEX 78 03 125). With and without pliers icon print. Print with the flat side down and with support. Print Settings Printer Brand: Anet Printer: A8 Rafts: No…
Halterung für: Zangen und Stifte Passend zu: S37x9 und Skadis Lochwände 8 Versionen: 2- und 3fach jeweils als => open - close - getrennt Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix Grundplatte 2" - B67 -…
Jaws compatible with the Knipex 86 XX 150 pliers. It has jaw to grip round objects.
This is my version of the Knipex Skadis holder. Did a few changes to it, so it can be printed in the standing Prints very easy…only the peg needs support, the rest can be printed without supports. Printed it in 0.2mm layer height.
This holder was designed to attach to a flat surface using either hot glue or using 3M mounting tape. I can confirm that you can use this with Knipex Super Snips 78-06-125, Knipex Super Snips 78-61-125 and the Creality Snips that comes…
Multiboard Mount for a KNIPEX 12 62 180 Wire Stripper You can find the editable original file in Onshape: https://cad.onshape.com But if you go this way, I would still appreciate a download and a like here.But if you go this way, I would…
Multiboard Holder for Knipex Cobra Pliers STL is for 87 01 250 (Cobra 250mm) and 86 03 125 (Mini-Zangenschlüssel 125mm) V2 is equipped with retaining lugs for secure attachment to the wall. To fit any sizes you can find a parametric Model…
This is a slimline holder for froooch's EDC knife (and variations thereof, such as the ones I made here and here ) and the KNIPEX Cobra® XS (SKU 87 00 100) mini pliers. The EDC Utility Knife slides over a boss on one side of the holder,…
Skadis holders for Knipex pliers, wire cutters and wire stripper The holders are designed to be used with this skadis peg for mounting https://www.printables.com/model/635620-skadis-skadis-universal-peg The wire stripper holder works is…
Print your own clip for the Knipex Xtend handle in the color of your preference. I used the handle model provided by Knipex for modelling a variant of the clip. I also added a couple of variants so you can choose either a “clean” version…
My first attempt at a Fusion 360 model and I think it turned out great! Printed with 0.6mm nozzle in PETG, draft mode. The linesman are model “ 09 01 240” . You can see what this means on Knipex's website.
Printed with PLA, 15% infill. Increase bed temp if you get any warping. No supports, no brims.
I always keep a side cutter near my printer to cut filament, but do not have a dedicated place to store it. Since the space on my desk is pretty limited I designed a small bracket which fits on the top z-axis part of my Prusa Mk3.5S and…
Small mount for holding Knipex Super Knips pliers on the IKEA Skadis. Easy printing. Support recommended.
Created with the Fusion Gridfinity Generator .
Created with the Fusion Gridfinity Plugin .
Created with the Fusion Gridfinity Generator .
Prints without support, 0.2 layers and 4 perimeters
Print with paint on support as shown in the picture, in PETG with 0.2mm layers and 4 perimeters
This was a quick remix of @KC_222651 's Knipex wire stripper (13 72 8) holder to put the mounting holes for the Skadis T-nuts through the main body, and removing the extra material at the top.
Print with alignment guide on the top, I used tree supports and printed in ABS with 3 walls. I used M2.5 x 16mm, pretty sure M3 would work too.
Prints without support or brim. 0.2mm layers recommended. Leave a comment if you need other sizes.
Hold your knipex plier in your gridfinity system. Non stackable. printed in PLA, 10% infill
Holder for the Knipex 26 12 200 pliers. Might work with other models (e.g. 70 02 160 side cutters fit loosely, 03 02 180 pliers are too big), but no guarantees. I wasn’t a big fan of having to pay attention to the insert/screw…
This simple holder is designed to be printed in rigid filaments like PETG, PLA or ABS, unlike the original model by @Yurshevich_387032 . Instead of a belt mount it has two holes for screwing the holder to something with M5 rounded head…
This model is designed to hold a set of 10in Knipex Cobra pliers Attaches to the wall with a hollow insert STL, Step, and parametric FreeCAD files included
Scaled each axis separately to better conform to the jaws of my slightly larger 125s. Tried 125% scaling as the other user did but didn't fit at all for me. Once I landed on this size I printed 99, 101 and 102% versions to see which fit…
Adjusted the Knipex Cobra Holder for Multiboard holders for use with the DDD Printable Wall Control System . Works for the Knipex Cobra 87 02 180 and the 87 02 250. For use with Wall Control, you'll need a 2x0-flat-right.stl and a…
