130 models
Držák baterie na podvozek Yokomo YD2 SXII, jednoduchý a funkční koncept. I po instalaci je stále možné použít odklápěcí držák baterie.
Print approx. €1.85–€2.27 excl. taxPreliminary estimate for one variant
Simple cap for cover Komo grain mill exit hole, printed in PET-G in vase mode (0.6 mm nozzle).
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for PETGSource material: PET
klíčenka FCM Komořany
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for PETGSource material: PET
Komori Planter | with reservoir A quiet evolution of the Kumiko planter. This is the new version of the Kumiko planter design, I wanted to explore a more understated form. With Komori Planter, I’ve moved away from the traditional footed…
Figurine of a komodo dragon. The model features scale/skin texturing along the model. The figurine measures 5.5 inches at default scale. I created three variants of the model, standing, walking and lying down. I recommend printing it at a…
About the model IKEA Malm drawers are around 70x42 cm. The drawer has been devided into a 6x6 cm grid leading to a total of 12x7 elements. Because of the square grid each insert can be rotated as needed. Elements are provided from 1x1…
Hi, It's my air funnel for 30mm and 25mm fan.
Massive angular komodo dragon with polygonal claws and tail.
Transfer from the NHM Vienna Sketchfab profile respecting the original copyright 3D scan of a Komodo dragon ( Varanus komodoensis ), the largest lizard species in the world. The males grow up to 3 m long and weigh 70 kg. The Komodo dragon…
Simple magnetic body mount for the Yokomo YD2 vehicles. I specifically made this for the YD2-Z RTR model. You will also need 12mmx3mm magnets, and some 1.5mmx15mm screws to attach it. It is designed for the screw to go through the factory…
The Komodo and SmallRig's Cage don't include 3/8"-16 threads which are stronger and also I haven't been able to find a great cheese plate for this small camera. So I made one for my DOP's Komodo :) It retains easy access to the power…
Designed to be easily adjusted if needed for the perfect fitment, and works pretty well for walltaps due to the deep magnet cups! Additional hardware needed below, and pay attention to print orientations and mirroring the rear mounts. No…
Mozkomor – temná, plující bytost inspirovaná magickým světem Harryho Pottera. Tato figurka zachycuje strašidelnou, zahalenou postavu s potrhaným pláštěm a prázdnou kapucí, která působí, jako by se vznášela nad zemí. Dynamické tvary látky…
Capture the unique charm of this fascinating reptile with this 3D printable STL model of a Cute Komodo Dragon. This friendly miniature is perfect for adding an interesting and adorable touch of exotic wildlife to your displays or…
This was a fun little lizard model. I put on a bunch of dragon scale textures onto it and horns for teeth etc... Category: Other
🇩🇪 Dieses Modell kann auf die gewünschte Größe skaliert werden. Die größere Lok auf den Fotos hat 60 %, die kleinere 40 % der Originalgröße. Einige Dateien müssen mehrfach gedruckt werden: 4 x Puffer 2 x Raeder A 2 x Raeder B 2 x Stange A…
Car stand for 1/10th scale offroad rc cars. This car stand has a Yokomo branding. You also need six M3x10 screws and 6 nuts to screw the two halfs together.
Jedná se o lokomotivu RC6 švédské železniční společnosti. Model je v měřítku "0" (1:45) s rozchodem 32 mm a je vytvořená jako součást OS Railway. Součástí jsou i soubory pro tisk jednotlivých částí a zdrojový kód pro arduino (ten ovšem…
Simple rear bumper that protects the ESC and can be used to carry the chassis. I recommend at least 3 perimeters and 50% infill.
The emblem of FC Lokomotiv Moscow is a distinctive and iconic symbol that represents the club's rich history and values. At its center lies a large red locomotive wheel, symbolizing the club’s name and heritage as a team originally…
This was made specifically for this brake light: I just found: https://a.co/d/03c3ORk0 The turn signals can be found here: https://a.co/d/09FuZZQT
a locking screw with a 8mm screw that wraps around a regular apple usb c cable to lighting.. the threads are 2mm. so anything can be used as long its 2mm screw. Printed in PLA at 100% infill.. no supports needed
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP I’ll be gradually adding colored profiles for the Mini Zoo…
Tokomon Digimon Creature Model
Extension handle for Yokomo turnbuckle wrench
magnetic body mounts that fit yokomo posts. Use existing body pins to secure to body posts. mounts them selves allow quite a bit of adjustment in height. These things are rough I just made them quick and sloppy as a stop gap but dammit…
Are you ready to destroy the Evil Power?? With Lambtron by your side, all is possible! He is very lonely because there are so few Lambtron left in the world, will he ever find a companion?
Securely cradle your Yokomo YD2Zs power source with our battery tray holder, optimal performance on every twist and turn! This is designed to be used with heat set thread inserts. these ones: https://amzn.to/3JR0gh6 Note these are not…
Dieselová lokomotiva řady 740. Československá výroba, vyráběná v letech 1973–1989. Určena pro zahradní železnici v měřítku „G“ . Jednoduchý tisk. Doporučená vrstva 0,2 mm. Příprava pro LED osvětlení. Pro 2 ks továrních podvozků LGB 78 mm…
Clip shaped like a Komodo Dragon. Can be used as a chip clip, sd card holder, clothes pin, etc I recommend printing with ironing on last layer , 0.16-0.2 layer height and “Outside to Inside print order” for Cura Note: This clip doesn't…
Here are a couple giant lizards - I have two more in my backlog to do. They're relatively quick and easy models but I played around quite a bit with programmatic textures on lizard #2. When I printed them I did them at 0.15mm on a 0.2mm…
Just a basic print, I did supports with top and bottom Z distance of .21 for easy pull away. I printed this one with a glassy PETG just to finish off a roll... I think it would look better with a matte or silky PLA.
Mount plate to mount esc on rear difuser with wiring underneath right rear out drive. This mount allows you to run the power, motor, esc signal and sensor wiring underneath a place and underneath the right rear out drive on the YD2SX3…
Pad for a short battery to prevent movement. If you want a colored logo, it is necessary to change the color of the filament.
RED KOMODO Container for miscellaneous things around your desk. Takes 8 magnets 3x2mm, I used these !
Lokomotiva školní zahradní železnice Videos: https://www.youtube.com/watch?v=b3ps8L0RILc&t=12s https://www.youtube.com/watch?v=2Wy08Bh01u8&t=2s
Ready for the Malcolm in the Middle: Life's Still Unfair? 🚀 This is a homage to the legendary Komodo 3000 . Instead of turning night into day, this model serves as a secret stash box. The base and the sphere are joined by a threaded…
Jedná se o lokomotivu Z70 švédské železniční společnosti. Model je v měřítku "0" (1:45) s rozchodem 32 mm a je vytvořená jako součást OS Railway. Součástí jsou i soubory pro zdrojový kód pro arduino (ten ovšem nemám vyzkoušený). Spojovací…
This is a replacement nebulizer chamber head for the Omron A3 inhaler. It has been tested and works like the original. Printed with a 0.2 mm nozzle and a layer height of 0.08 mm. Jedná se o náhradní hlavu rozprašovací komory pro Inhalátor…
3D model lokomotivy 363 - Esa Layer height: 0.15 mm Supports: No
Malá lokomotiva pro zahradní železnici Videos: https://www.youtube.com/watch?v=b3ps8L0RILc&t=12s https://www.youtube.com/watch?v=2Wy08Bh01u8&t=2s
This modern Komondor Dog Sculpture brings together minimalism, abstraction, and expressive texture in one striking piece. Crafted in matte black with elegant rhythmic grooves, the figurine transforms a familiar animal shape into a…
EN: BabyTrains MINI - Locomotives 🇨🇿 Česká verze níže 📝What is BabyTrains? Story here . Overview of All Models on Printables: BabyTrains MINI BabyTrains BabyTrains motorized for LaskaKit Each (almost) loco is available in several…
Two base holders. Both models use thread serts, these ones specifically, but any 3mm based one would work: https://amzn.to/3WvNU5w One holder is flat without nubs and sad. It is sad because it is designed to be used with VHB. Look how sad…
New version can be found here . Novou verzi najdete zde . Zcela nové modely lokomotiv a vagónů pro dřevěné vláčkodráhy (Brio, Lidl, Ikea) 🚂 Model lokomotivy inspirovaný legendární českou hrou Hra Vlak (The Train). Všechny modely zde:…
Model lokomotivy 150 se sběrači a okny.
I think this is my last Komodo dragon model from my backlog. I was having a lot of fun playing with dragon scale texture brushes. I went a little overboard with the teeth on this one which kinda accentuates some of its jaw issues. I don't…
SM42 locomotive, lokomotywa SM42 PLA print
Komoda pro panenky šíře 160mm, výška 115 mm, hloubka 61,5 mm se šuplaty.Zásuvka menší šíře 64mm, výška 29.5mm, hloubka 50 mm bez držadla. Zásuvka větší šíře 133.2mm, výška 29.5mm, hloubka 50 mm bez držadla.
First shot of this protection device for Talaria Komodo Street Legal version I recommend to print in PETG, 3 layers. Can do the Komodo typo in a second color in your slicer for a spicier make :) I just added a version without the logo !
Lokomotive zum Drucken in Einzelteilen. Löcher erfüllen den Kernlochdurchmesser zum Gewindeschneiden.
Yokomo YZ10 91 Works Front Knucle Print Settings Printer Brand: Zortrax Printer: M200 Rafts: Yes Supports: Yes Resolution: .09 Infill: 100 Category: R/C Vehicles
CZ Těsnění pro karburátor legendárního mopedu stadion s11 a s22. Tiskněte z TPU nebo jiného flexi materiálu (doporučuji otestovat zda se nerozpouští v benzínu). výplň 100% ENG Print out of TPU or other flexi material (I recommend testing…
Komondor dog Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d )
Finální díl se skládá ze dvou polovin, po vložení pružiny (třeba z propisky) se oba díly do sebe zacvaknou. Prusa slicer, přednastavený profil tisku 0,1 Detail, Prusament ASA, Original Prusa MINI. Díl 1.polovina spotřeba filamentu 0,45 m,…
Klika na dveře skříně nebo klika na komodu.
A new Chinpokomon appears! Accountafish! The fish/accountant type Chinpokomon is ready to help you on your quest to destroy the Evil Power! Included files of the model as one piece, and as separate pieces I gotta buy 'em, Chinpokomon!
A simple mount to center your gyro on the chassis of your RWD-converted Tamiya TT-02. Includes a wall to route cables along the inside of the clip. Notes: Mount to chassis as pictured using an extra Tamiya 3x10mm "MA2" screw Print on the…
This support only fits on to the Bright Tangerine sideplates and the „DJI RS2 & RS3 Dovetail“ (not extended) baseplate for the RED Komodo. Screws: 2x M3 x 12mm 1x M4 x 12mm 2x M4 x 20mm Printing: Layer height: 0.1 Supports: Zigzag Infill:…
Magnetic rear body mount / holder for the Yokomo SD_RD_2.0. There are a few different variants for different bodies. Adjusted angle. M3 screws mounted.
Me gustaría presentarte el Komodo 3000. Estos fuegos artificiales de la serie de los 90 Malcolm in the MIddle perfecto para dioramas y o bromas pesadas ¡Gratis para todos!
Lipo battery box for Yokomo YZ10 Category: R/C Vehicles
Vlaječka multikaliberní (pro více ráží) vhodná pro: pistole a PCC ráže 9mm Luger pušky (např. Sa.58, AK47) v ráži 7,62x39 pušky (např. AK74) v ráži 5,45x39 pušky typu AR15 v ráži .223Rem (5,56x45) Tištěno z PETG, infill 70%, 6 perimetrů.
DO THIS AT YOUR OWN RISK! This battery plate replaces your Accsoon Cineview's original battery Sony NP-F battery mount in place of dual Canon BP dummy slots so that your Accsoon Cineview can mount directly to the back of your RED Komodo…
TonosamaGekomon Digimon Creature Model
Můj nápad tedy byl předělat běžný piko analogový ovladač k modelovým vláčkům do podoby skutečného pultu v lokomotivě. Nejvíce se nám líbil viz foto. Je od toho klíč kterým se to celé zapne.…
I have created a full set of LED strip holders for the Yokomo SD 2.0 1:10 scale RC drift car. Tested on a real model. More information about the electronics, wiring, software and integration with the Futaba transmitter is available on…
Jaaa, ist nicht ganz Vorbildgetreu, solls aber auch nicht sein, sollte halt zu meinen anderen Loks passen :) Als Motor werden 2 Playmobil-Antriebe benötigt (z.b. von der 4050/4051), alles andere ist gedruckt. Aktuelle Version:
Gekomon Digimon Creature Model
Obiekt używany w zawodach Task Hunters w zadaniu polegającym na transportowaniu rdzeni.
The cool vehicle from the game Far Lone sails for 3d printing, size is 312mm x 106mm x around 130mm ish, use the flywheel shaft to connect both halfs together and make sure the flywheel spins freely, wheelshaft is the same, you'll need to…
This is big hatch cover for older Filippi boats
List of materials BMG set Idler arm from a sherpa mini M3 inserts with an diameter of 4.1mm (Mellow brass inserts were used) Notes: chop down the heatsink for those measurements
DISCLAIMER AND AI SLOP WARNING! This model was generated with AI (Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d) from picture and slightly modified by me to make it easier to print. I split the model to…
OKO1 steam lokomotive looking toy. It doesnt have moving parts.
The usual funnel volume of Komo FIDIFLOC MEDIUM mill is: 850 g (wheat / mill). This is sometimes too little for comfortable use. Also, this extension allows for an easier filling process, as less grain is missed. The size is optimized for…
Modely vytvořili: Tažení - Daniel G. Víko, konzole - Lukáš M. Lokomotiva - Lenka N. Skořepina - Jan N.
Always worried about breaking your key while opening the Talaria Komodo battery hatch? This model prevents this from happening by utilizing ATV-style protection for the original Talaria key. Print from PETG or any rigid material; no…
DISCLAIMER AND AI SLOP WARNING! This model was generated with Meshy AI from picture and slightly modified by me to make it easier to print. I also designed the base from scratch that comes with it. The negative part that creates a hole…
Here is a geometrical art of the famous E69 a small electro locomotive use to arrange the wagons. I'll post the schematic on how to place the piste a bit later…
hält die Schublade bzw. die schiene des schrankes
Funguje z čehokoli, takže nejspíš PLA a PET-G, silikonem pak vlepím na černo nastříkaný hliník. Silikon drží na obojím. K dispozici je .scad zdroják lze si upravit rozměry dle potřeby a exportovat (v programu OpenSCAD).
průmer 100 mm a vnitřní 17 mm na ložisko tisknou s Petg
Zvednutí světlé výšky komody aby pod ní zajel robotický vysavač.
just fun to play with. Model : It has a moveable tail, mouth that can open and close, more hats that are coming and it drives. Printing : Supports needed for the body and the Christmas head not for the tail or mouth. Assembly : You need…
Simple bracket to mount a CyanView RIO to the SmallHD Indie 7 RED KOMODO-X monitor
Lokomo was one of the “big two” locomotive and rollingstock manufacturers during the steam era in finland along with Tampella. Besides railway equipment, Lokomo also made tools and cranes for the heavy-industry along with construction…
Red Komodo Schlüsselanhänger (3D-Druckdatei) Stylischer Schlüsselanhänger im Design eines Red Komodo. Die Datei ist für den 3D-Druck optimiert und eignet sich perfekt als kleines Gadget, Geschenk oder Statement am Schlüsselbund. Kompakt,…
This is a wire spool holder that was designed for large rolls of wire-wrap wire. I think the assembly should be intuitive enough to not provide assembly instructions, but if you have questions, I'm happy to answer them! It is designed to…
průměr 150 mm vnitřní 6 mm je lepší tisk s petg
Unlike setups that require you to retain heavy OEM mirror mounting hardware, this design includes a fully 3D-printable expanding internal wedge system. When you tighten the central bolt, the internal sleeve expands inside the handlebar…
