Counting matching models…
This is a battery cap for an old Konica C35 film camera. It has a M15x1 thread size (roughly) and screws into the camera just like the original with no issues. The slot is made to fit an Australia 10c piece (~2mm wide, 23.5mm Diameter),…
I put togeather a Konica and a sony E adapter i found here on thingiverse. test-printing it now. Category: Camera
Konica c35 lens cap. It has a tight fit so depending on material and 3d-printer, you might need to fill it. There're 2 model files one with logo on cap and another without. Also added .f3d file, so you can offset face of inner diameter.
In 1985, Minolta became the first company to produce a body-driven autofocus 35mm SLR -- the Maxxum 7000 -- and with it, the new A (also called Alpha or AF, replacing the incompatible manual-focus SR/MC/MD) mount became the camera system…
A simple squared lens hood for the Konica C35, model tested on a C35 EF and ensure a snug tight fit, trimming possible
The most common problem on the konica recorder is the battery door hinges snapping, this both fixes that and adds an extra bit of grip to hold onto. Should be possible to print it without supports if you use a pretty low layer height, 0.2…
I created this from https://www.thingiverse.com/thing:1730319 and https://www.thingiverse.com/thing:4931021 to mount my old Konica lenses onto a TEchart LM-EA9 (should work with other Leica M bodies but no way for me to test this). I…
A replacement battery compartment for the Konica Auto-Reflex. You may need to use a 1/16" drill bit to loosen the score holes, as they are quite tight.
Probably not going to help anyone, but I'm still gonna put it out there. This mod takes a Konica Hexanon 38mm f2.8 lens from a classical film era rangefinder style point-and-shoot and adapts it to micro four thirds mount. The current…
Ho costruito questo semplice copri obiettivo per un Konica 40mm. è liscio quindi non si avvita alla lente. Io ho stampato con ugello di 0.4
Sometimes the Konica C35 ASA/ISO dial gets stuck. It can be very difficult to turn it by hand. I made this simple tool for me, and it works very well for my Konica C35 AF. Perhaps it will be useful to someone ?
I designed this case as an alternative to the leather half case these cameras came with. It screws into the tripod mount with these screws, or something similar. The screw mount is designed to print without support, so you'll have to cut…
Embossed replacement plate for LS-100 Luminance Meter. Plate was attached to the body via super glue, and then painted. Onshape model can be found here:…
A tool for turning the film sensitivity change ring for the Konica C35AF. You can easily change the film sensitivity even if the ring is stuck.
This is a 3D printable label frame designed for the control panel of the Konica Minolta Bizhub C258 multifunction printer. It helps users clearly identify the most used buttons – "PRINT" , "SCAN" , "COPY" , and the numeric keypad – by…
A cable release for the shutter is not often needed on a point and shoot camera, but here it is anyways.
The metal nut for the rewind knob started to slip, which gave me a hard time rewinding the film. Tried my best to replicate the original. No supports needed Printed default voron 0.2 0.15mm profile
📸 Konica C35 Handgrip + Thumb Grip ✨ Function: Provides a secure one-handed hold, reduces camera shake, and prevents hand fatigue while shooting. ⚙ Design: Perfectly fits the Konica C35 body. Mounts easily via the top hot shoe and bottom…
Purpose The purpose of this spacer is if you don't have any PX625 batteries on hand or you can use this as versatile way for more battery options for this camera Instructions place 2x 386 batteries in the spacer (making sure that opposite…
A friction-fit lens cap for the Konica Pop 35mm point-and-shoot camera. The original cap is easily lost, leaving the lens unprotected, this replacement snaps on and off cleanly while staying put in a bag or pocket. Modeled at 45mm inner…
This is a functional replacement for the safety door detection actuator (interlock switch key) on a Konica Minolta AccurioPress C3080 production digital press. When the standard OEM plastic tab snaps or bends, the press will throw a…
A quick replacement for the notorious green RU jam clearance lever found inside Konica Minolta production presses with attached Relay Unit Modules. The original injection-molded parts frequently stress-fracture near the retention pin…
This replaces the obsolete 1.35V mercury batteries with either one 3V CR-1/3N or two 1.5V LR44 or SR44 batteries. Note: This camera's meter was designed to run off two 1.35V batteries (2.7V in series). Using one 3V or two 1.5V batteries…
I had a pile of empty toner cartridges from my Konica Minolta printer, so I decided to repurpose them for storing welding electrodes. The extended version of the lid is for longer electrodes that didn't fit inside the cartridge. I…
I designed this case as an alternative to the leather half case these cameras came with. It screws into the tripod mount with these screws, or something similar. The screw mount is designed to print without support, so you'll have to cut…
Purpose The purpose of this spacer is if you don't have any PX625 batteries on hand or you can use this as versatile way for more battery options for this camera Instructions place 2x 386 batteries in the spacer (making sure that opposite…
Embossed replacement plate for LS-100 Luminance Meter. Plate was attached to the body via super glue, and then painted. Onshape model can be found here:…
