Search results: kot

High pressure washer HECHT 323 (vysokotlaká myčka HECHT323)

Spojka vysokotlaké myčky HECHT 323

Bojkotta Israel

Proudly made on special request from descendent of a Holocoust survivor.

Minecraft kotel (Minecraft Inspired Cauldron)

Minecraft kotel Koukněte i na mé další modely . Pokud mě chcete podpořit, můžete zde: PayPal , BuyMeACofee , QRCodePay . Děkuji

Umikot WDT Tool holder for Lelit Mara X

Since I wanted to hang my WDT-Tool next to the tamper of my Lelit Mara X Espresso machine, I:ve merged the two models together. Print with supports on bed only. Print with PETG or ABS, PLA works if you use it in the back of the machine…

Life Bar (32 pips) Parts Storage and Display for Kotobukiya Rockman Zero Models (Ver 1.0)

Summary This is a storage box used to store all the extra parts your Kotobukiya Rockman Zero kit comes with. It doubles as a life bar effects piece that can be displayed along side your model. Options The box is a fully upgraded “32 pip”…

Life Bar Storage Box Alternate Parts Set #1 (X Full Life) (Kotobukiya Rockman Models) (Ver 1.0)

Summary This is alternate parts to convert the 32 pip Life Bar Box I made for Zero into one for X too. I also included an alternative life bar indicator for damaged status, down to 4/32 pips of life. Use the original files in the original…

battery charger hand carry frame for battery of ATOUN ”modelY,ModelY+KOTE”＆UPR”EP＋ROBO”

友人たちが使うパワーアシストスーツのバッテリーと充電器を手軽に持ち歩けるようにするフレームを設計しました。 下記の外骨格は、同じタイプの専用バッテリーで駆動します。 ATOUN ”ModelY”、”ModelY+KOTE” UPR”EP＋ROBO” I designed a frame that allows my friends to easily carry around the batteries and chargers for their power…

Silent Hill Doll - Muñeca de Silent Hill f - Fan Art - Koto Shimizu Hinako - Fox -

Silent Hill F doll 25cm tall to print in one piece. Print settings below. Thanks for stopping by :) No comercial use. Personal use ONLY Link to Patreon :) patreon.com/Artoys3dPrint Muñeca de Silent Hill F a imprimir en una sola pieza.…

Coffee block : Umikot 58mm Short Tab

I model this little Umikot 58mm short tab block because I really love the original stand of the Umikot design and want it to be integrated into the coffee block :D !

Minn Kota prop

3 blade prop (Print with honeycomb infill)

USB-C Fume Extractor Mod for KOTTO

This is a mod for the KOTTO fume extractor. Required parts: KOTTO Fume extractor 120mm X 120mm X 38mm, DC fan. I used the SUNON MEC0381V1-000U-A99, which is a high speed 12VDC affordable fan (6.70 CHF or ~7EUR on conrad.ch ) USB-C Trigger…

kotü şekilli düz anahtar

kotü şekilli düz anahtar bu anahtarım çizimini özelleştire bilmeniz için solid dosyasınıda koydum

Ghostface / Vřískot / Scream

Busta z filmu Vřískot / Bust from the movie Scream

Mykhaïlo Mykhaïlovytch Kotsioubynsky — Bust

Mykhaïlo Mykhaïlovytch Kotsioubynsky — Buste 🇫🇷 Description Ce buste représente Mykhaïlo Mykhaïlovytch Kotsioubynsky dans une interprétation sculpturale classique limitée à la tête et au haut du torse, reposant sur un socle discret. Les…

Kotek

Kotek

David (Seth Kotkin) Copperfield – Bust

David (Seth Kotkin) Copperfield – Buste 🇫🇷 Description : Ce buste représente David (Seth Kotkin) Copperfield, célèbre illusionniste américain, reconnu comme l’un des plus grands magiciens de l’histoire moderne. Inspiré de la photo la plus…

Replacement Door Lock Plunger for Dodge Dakota Sport

I included a 3mf with supports along the bottom and a brim at the very bottom with the model rotated and a corner cut off. This is my recommended way to print it, otherwise the top of the plunger looks awful and needs sanded. This also…

ozdobne kotki figurki

bardzo ładne figurki jako ozdoba lub zabawka

Umikot long base 24mm with 12 magnets

changed the 24mm long tab for the famous umikot to fit aliexpress magnet 5x2.6mm also changed qty to 12 for better grip with the basket. added a solidworks file where you can change the mangets qty

South Dakota Jackrabbits Football Helmet

*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…

South Dakota Coyotes Football Helmet

*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…

North Dakota Fighting Hawks Football Helmet

*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…

Umikot (58mm, Short) Spin Ring with Finger Detent

Remixed to have a detent to spin with index finger

Umikot 58mm Mechanism and Spin Ring modified to receive M3 HEATSET INSERTS

In this mod, the short Mech is V2 modified to receive 4x m3 heatset inserts. The Spin Ring V2 is modified to receive 1x m3 heatset inserts. This avoids the need to directly thread M3x12 into plastic. Direct-thread M3s are…

(JetBrains) Kotlin mascot - Kodee

glue all body parts together. it is possible to scale model up or down (my print with googly eyes is scaled down to 60%). you can also use googly eyes instead of printed eyes. recommend to paint underneath the face with white opaque…

Madlo pro brusné kotouče M14 / Handle for sanding disc M14

Konstruováno pro použití se šroubem DIN 933 - M14x30 Designed for use with screw DIN 933 - M14x30

Umikot Gaggia Base Stand

Stand for the Gaggia Base by Mattus Umikot

Filament spool holder, Držiak kotuľky filamentu

Filament spool holder, Držiak kotuľky filamentu

Waterkotte Open Tool

Tool to open the front side of a Waterkotte heatpump from the EcoTouch series. Also includes a short version for tight spaces.

Držák kotoučů úhlové brusky / Angle grinder disc holder

Držák kotoučů úhlové brusky / Angle grinder disc holder

kotva

Vytvořil jsem z obrázku png který jsem našel na internetu soubor SVG a z něho potom model stl.

Improved Kotto fume extractor hood.

Replacement for stock Kotto hood. Works 2x better than the stock rectangular hood.…

Maskot Standalone workstation upgrades

We recommend to ESD coat all plastic parts or print with ESD safe plastics. The parts are self explanatory for the machine owners. We cannot provide any photos as the machine was decommissioned The standoffs are designed to have magnets…

Scream/Vřískot nášivka

Scream/Vřískot nášivka

Koteimer geschlossen zum einhängen

Wer Katzen hat wird das Problem mit offenen Koteimer wohl kennen ;-) (sie werden NIIIIIEEEE voll) Dieser ist zum Einhängen: Über dem Auswurf ist eine Schraube, die habe ich durch eine längere Schraube ersetzt, hier habe ich mein Koteimer…

49mm umikot

49mm umikot, scaled down and adjusted from the 54mm original version

kot

.

Belgian 'frietkot' 1:87 for H0

fantasy Belgian ‘frietkot’, designed for the H0 train module of 'De Pijl' 2024 You can read more about this project at : https://www.de-pijl.be/banen/het-frietkot/ scale 1:87 for H0 I opted for the shorter version of the add-on in the one…

Umikot V2 Breville 54mm Version - Stock V2 size

Having only 30mm handle needles I was determined to not buy another 500. Thanks to Tyler having his model available I was able to make the required adjustments to use longer handles as used in the original umikot models. Please follow the…

High pressure washer HECHT 323 (vysokotlaká myčka HECHT323)

Spojka vysokotlaké myčky HECHT 323

Minn-Kota Trolling motor speed control knob

If you make a modification to the speed control of your engine, this knob with the brand logo will be helpful. File designed to be printed in 2 colors

Rostomilé kotátka, kočka

Dobré ráno, Vítejte na mém profilu, plném modelů a miniatur :-) Mám pro vás 2 roztomilé Koťátka na farmu, nebo jen tak na hrani. Velmi povedené zvířátka. Je vhodná k nabarvení. Moje deti ji naprosto milujou :-). Pokud vás moje práce…

Umikid - The make believe child Umikot

Together with our two-year-old child, I like to make an Espresso. I use my machine, he uses his toy machine and our son loves to help. I enjoy using the Umikot myself, but it is still a bit much for our son and the Umikot does not fit on…

Figure of Kotu - The Kakamora Warrior from Vaiana 2

I printed this model on my Bambu Lab P1S using eSUN PLA+, 0.4 mm nozzle, 0.12 layer height, 15% infill, 3 borders, painted slim tree supports (in .3mf file).

Dakota hatch handle

I recommend PET-G/ASA/PC 3 perimeters, 50% infill. For assembly you will need 4 pcs of the screws M3-8mm. New handle is reinforced.

Umikot 51mm base for NEOUZA Bottomless Portafilter

This model is adjusted to fit the NEOUZA 51mm Bottomless Portafilter from amazon.

Gen 2 Dodge Dakota Center Console Repair Kit

This is a file I created to repair the broken screw mounting points for a manual transmission 2001 Dodge Dakota. It may work for all gen 2 Dakotas. You will need to drill out the existing mounts, but the prints should fit comfortably…

58mm Umikot + Tamper Stand

Keep your pyrographic coffee distributor and a tamper together on a nice stand

Brusný kotouč 50mm na závit M14 (úhlová bruska)

Brusný nástavec na úhlovou brusku 50mm Pro broušení je třeba dolepit suchý zip

#3DTakoTuesday Squid Costume

Assembly video:

Umikot 54 - Modified

Modified Umikot 54mm version - exported tolerance to print with .8mm nozzle. 0.8mm needles M3 threaded inserts 603zz bearings F3D included with parametric diameters of bearings, inserts and needles Assembly tips: Make a bend in the needle…

USS North Dakota SSN 784 - 1/350 High Quality

North Dakota (SSN-784) will be a Virginia-class submarine. She will be the second ship of the United States Navy to be n

Umikot x BooKoo Coffee: Elektrischer WDT-Remix von Remix (Makerworld)

Hello everyone Here is a remix of the remix of a Makerworld part. https://makerworld.com/de/models/746147?designId=746147#profileId-679191 I put the fixed needle back on the SpinRing and removed the crank holder. The MainBody and TopCover…

Scream Vřískot funko POP!

Print & acrylic draw

True Umikot 58mm Base with tabs for Cafelat Robot

I created this because I disagree with the other Robot builds that suggest downsizing the 58mm Umikot to 94%, I want my as much of my bed as possible whisked. To this end, build the standard 58mm Umikot at 100%, and print this, it will…

Kotu the Kakamora from Moana 2 - Using a real coconut!

I recommend using a real coconut, but there is a printable version if you would prefer that! There are also a few printable faces if you don't want to bother with cutting out and reattaching the face plate. Anything non structural can be…

Dodge Dakota Door Screw Cover

A simple cover for the main screw that attaches the inner door handle to the door structure - see attached image for location. Works for front doors, as well as rear doors on quad cab trucks. Should fit any 2nd generation Dodge Dakota…

Umikot x BooKoo Coffee Tamping station

Umikot V2 - 49mm Pavoni and Cremina Base for naked-portafilter

New base for the portafilter from naked-portafilter.com for the 49mm La Pavoni or Olympia Cremina. I use it with the 14g precision basket with 22mm depth. I needed to cut the needles to a total of 40/50mm. Printed with PETG on Bambulab A1…

Breville Barista Express Single Dose Hopper Umikot Mount

Just a little adapter Ring for mounting your Umikot 54mm on top of Simbungu's single dose hopper. Supposed to be glued to the Single Dose Hopper with Cyanoacrylate. Have Fun!

Leukotape Spool for UL Backpacking

I created this model to reduce the weight of carrying a full Leukotape spool (4 oz) to around an arms’ length (0.4 oz).

Angle grinder disc holder / držák kotoučů na flexu

This simple holder fits all standard angle grinder discs - no matter if its 115, 125 or 230mm - all have central hole of 22,3mm. Print with 3-4 perimeters and 20-30% infill, as some disc can be pretty heavy. Screw into some wood with…

Funkotron X-01 – The Adorable And Cute Robot Companion

3D Printing Tips – Build Your Own Robot Buddy! ✅ Recommended Settings: Layer Height: 0.1 – 0.2mm (Fine layers for a sleek, futuristic finish). Infill: 15–20% (Enough to keep it solid but not overly heavy). Supports: Minimal or none—this…

IKEA Muskot Water Supply Planter

IKEA sells cheap ceramic pots that have a small lip inside. This design is for a small plate that sits on that lip to create a water reservoir below. There are several other similar designs available but I wanted one that is strong, quick…

Articulated slakoth

A little articulated slakoth - let it sleep anywhere 😴 Neeps supports. The print profile is single colored and can easily be scaled.

Hat Hanger for Dakota Closets

Parts to hang hats on Dakota Closets shelving units. Two, 5mm x 10mm Euro screws attach the brackets to the units. Example of screws .

Umikot 58mm short tab stand aerated and less filament

i wanted a short tab stand for my umikot but i wanted it to be aerated as to discourage bacteria growth and use less filament

Bojkotta Israel

Proudly made on special request from descendent of a Holocoust survivor.

RokoTMidi Button 14.2x6.5mm

Gumb za RokoTMidi dugmetarac

Miska dla psa lub kota

Miska dla jedzenia i dla picie

Rahm Kota's Collapsing Lightsaber

This is the multi-part version of the lightsaber. It has been broken into different parts so they can be printed separately in different colors then glued together. There are locators for making the parts easy to glue on. The cap is…

Podložky kotník

Podložky na procvičovani kotníku

Minimal 3in1 portafilter / tamper / Umikot ring stand

Minimum ring base required to support a naked portafilter with handle perfectly touching on the table. Inner hole doubles as a tamper holder. Every portafilter is slightly diffferent in bottom diameter and handle angle, so its impossible…

Tamper Station for Umikot (58 mm) – Organized Espresso Workflow

This custom-designed Tamper Station is the perfect companion for the Umikot 58mm planetary gear espresso tool ( Umikot on Printables ). It offers dedicated slots for: Dosing ring/funnel Tamper Distributor/Leveler Puck screen Bottomless…

Electric WDT: Umikot x BooKoo Coffee (54mm Version, Remix)

I was delighted with BooKoo Coffe's electric WDT tool, but missed the precise planetary gearing of the Umikot. So I decided to combine the best of both worlds. This remix is suitable for 54 mm portafilters (Sage / Breville). Print the…

LaPavoni Post Mill Umikot (51 mm) - Remix

Printing This model consists of five seperate parts, each indicated by the leading number of the stl file. For parts 1 & 4 there are two version available, so pick one. All parts printed with 0.20 mm layer hight. Part 1 - Handle Print as…

Theodoros Kolokotronis - Hueforge

Usual Hueforge settings 100%, infill with a layer height of 0.08mm with a base layer of 0.16mm. May be sized, do not forget to keep the Z size as is. Start with Black At layer #11 (0.96mm) swap to Gray At layer #17 (1.44mm) swap to White…

Umikot 58MM Block

Umikot 58mm block for the coffee blocks knock box.

Minn Kota Trolling Motor Lift System

Clamp (For Shaft Diameter 1.128") Used on Minn Kota Endura C2-55 5 Perimeters 100% Infill Use 2 - 1/4 Bolts. Hole on side for 1/4 carabiner (Snug Fit) Spacer for Harken Pulley Kit 5 Perimeters 20% Infill Harken Pulley…

Klucz kot

Projekt powstał jako efekt testowania innowacji społecznej „Opracowanie projektów zabawek terapeutycznych wydrukowanych na drukarce 3D oraz scenariuszy zajęć terapeutycznych dla dzieci przedwcześnie urodzonych” przygotowanej w ramach…

Umikot 58mm Stand for Cafelat Robot

Full load of files below for a one stop shop to print everything needed for the Umikot 58mm for Cafelat Robot bundle. The files attached are for the Umikot 58mm - Upper (30mm needle handles)

Cat phone stand / Stojak na telefon w kształce kota

Cat phone stand / Stojak na telefon w kształce kota

Umikot58 - Base V2 25mm NoTab 5x5Mag

I changed the original holes sized for 3x5 magnets to fit my 5x5.

IKEA Muskot self watering plant liner - pot (two versions)

Self watering liner for the IKEA MUSKOT 9 cm version POT There are two version of the liner (see pictures): liner with channel/canal to fill the reservoir without removing the liner from the pot liner without the channel/canal The rim of…

Umikot58 - Stand NoTab - Stand NoTab - Curved

Same as original “Umikot58 - Stand NoTab” but with curved edges.

Osterei DekoTool

Halter zum Kreativen gestallten von Eiern verschiedener Größen. Über die untere Aufnahme wird das Ei eingespannt und federnd gelagert. Zusammenbau ohne Werkzeug und Leim, bis auf eine M4 Schraube dessen Mutter im inneren des Außengewindes…

1998 Dodge Dakota -- 3.9L V6 Magnum Exhaust Pattern/Flair

This model is for a 1998 Dodge Dakota w/ a 3.9L V6 Magnum. I used it to make custom derby headers.

Kotto Fume Extractor Back Vent

Note the profile is smaller than the advertised dimensions of 5"x5" for the Kotto. The STL model is for a Kotto that measured 4.8325 inch square profile.

Kotbeutelhalter-Flexi-Leinen

Flexi-Leinen Kotbeutelhalter. Passt perfekt in den Schlitz der Flexi-Leine. Innendurchmesser 34mm, für Kotbeutel mit einer Rollenlänge von 62mm und einem Rollendurchmesser von 33mm.

Halter für Einsätze für Kotlie 5-in-1-Kaffeemaschine

Unsere 5-in-1-Kaffeemaschine Kotlie EM-308A kommt mit 4 Einsätzen für verschiedene Kapsel-Typen. Wir nutzen die Maschine in unserem Wohnmobil und mich nervte es, dass die Einsätze lose in einer Schublade herumfliegen. Daher habe ich…

Minn kota heading sensor mount

Minn kota heading sensor mount to fit this type of quick connect mounts: https://www.aliexpress.com/item/1005004886346146.html?spm=a2g0o.order_list.order_list_main.126.79881802XsmKSO

Fußball Trikot Milan 25

Dekoratives Wandbild für Fußballfans mit der Nummer "25" und dem Namen "Milan".

1/12 1:12 scale Leica M10-P camera for Kotobukiya and other similar scale action figures

Designed this 3D model of Leica M10-P camera precisely scaled down to 1:12, though tuning sizing a bit for easier FDM print. Lens is just a generic shape. It has 2.5mm ID, need to use 3mm drill bit from the rear side and in camera mount…

Senkotatsu

chica zorro

Dog Waste Bags Dispenser with Wallmount / Hundekotbeutelspender mit Wandhalterung

The dog waste bag dispenser has been extended to include a wall rail, a lid and a viewing window. The dispenser can be easily removed for refilling. The large opening at the front makes it easy to check the fill level. The lid is secured…

Puch Dakota (VZ50) Speedometer drive gear

Should be printed with PC and 0.25 nozzle, i used 5 perimeter and gyroid infill. The module for the gear is 0.8 and it has 21 teeth.

Magnification lamp Kotto fume extractor mod.

You will need…. Harbor Freight magnifying lamp. https://www.harborfreight.com/fluorescent-magnifying-lamp-60643.html Kotto fume extractor.…

PSX Armor Capsule for Rockman X (Mega Man) Kotobukiya Kits (v1.1)

Details This is a custom model of the armor capsules from the PSX Rockman X games. It is 100% color separated for easy assembly. (This is a mirror to my Thingiverse upload) Since there is no official artwork released for the capsule, some…

X2 Buster for Zero Rockman X (Mega Man) Kotobukiya Kits

This is a pseudo replica of the Kotobukiya Zero Buster from Rockman X2. It's not a "perfect" replica but it's close enough. I made this to have a black version to go with the Black Zero kit, as it was not provided. Feel free to use it as…

kotarbau canister lid

Kotarbau canister lid replacement for kotarbau canister without valve print gasket with tpu or use gasket o-ring 41x5mm Print settings 0,2mm layer 6walls 6 top and bottom layer no supports