Counting matching models…
This is a remix of the wall mount on thingyverse. Converted from a single to a double mount to make life easer and not as frustrating. Increased to 6mm holes Made larger Screw Counter sink to accomodate decent screw to hold to wall…
Need a little extra storage for nuts and bolts readily accessible? maybe a drink holder. versatile storage crate for Milwaukee packout system. Print at scale, supports may be needed along bottom of crate depending on printer. crate itself…
I needed an accurate (tighter tolerance) cleat for the bottom of the Milwaukee Packout so I started from scratch and modeled my own.
I was designing very specific Packout receiver to fit a toolbox and someone mentioned making a standalone universal receiver. This receiver can be used in pairs to hang a full Packout box or standalone to hold items that only have one…
See update notes below ↓ 1-8-2026 This is to store a Milwaukee router inside the Packout Compact Organizer box by Milwaukee. The parts bin could use a lid but I don't plan on having much else inside this area other than the vacuum shroud.…
This is a blank insert I made when I created My Router Case for the Milwaukee Packout Compact Organizer. I have this shared as part of the files but I figured I would make it a seperate model. 3mf, stl, and step files included.
Converted @Zer0sum's design into Fusion 360: Modified chamfers to better match Packout design Adjusted tolerances for a better fit Added mounting holes for #8 Screws Upsidedownified = ready for printing without supports Modify the .f3d…
its just a rough approximation of the inside of the Milwaukee Packout compact organiser case for you guys to edit for specific things you wish to put in it. I think i have seen something online but this is modeled by me and is far from…
This is a CAD blank for the internal profile of the Compact Milwaukee Packout Organizer. I have supplied both the original fusion file and a .step file. Feel free to use it as a way to satisfy your endless urge to organize as as a kind of…
This is a modified version of packout hangers from blahblahblahresearch. I wanted these to have the recess for the charger's base feet to be 90 degrees from the original design and far less tall so that the charger is more stable in the…
These feet allow you to attach anything you want onto your Milwaukee packout toolbox. Post-Printing To help the bolts thread through the parts easier, I drilled out the holes with a 6.5mm drill bit. How I Designed This I've decided to go…
PackUp Labeled Nesting and Stackable Bins for Milwaukee Packout Organizer Models 48-22-8430 and 48-22-8435 A nesting divider bin system with customized labels for your Milwaukee Packout organizer. October 23rd 2025 Updates: Parametric…
I've included a blank label and “Rotary Tool”. Easy to add text in a slicer - I used BambuStudio. I used raised text and printed on the face with supports. You could also print the text flush for a cleaner surface and no supports needed.…
You'll most likely want a mix of files for your exact needs. If you're using a 48-22-8436 5-Compartment Low-Profile Compact Packout , you can fix 3× Slim Long Bit Bins (or a mix of half-width bins) If you're using a larger 48-22-8431…
These Packout low-profile organizer labels are inspired buy Dan Winciker’s Milwaukee Low Profile Packout Bit Set Label thing on Thingiverse. I have re-modeled the labels in openSCAD so that you can customize the text on the label and…
This is a clean and simple Milwaukee Packout Rail bracket. It is probably the most cost affordable design out there as there are no addition screws, nuts, or extras to purchase. Print Instructions: Please print 1 at regular orientation…
Dividers for stock factory Milwaukee Packout Deep Bins; divides bins into halves or quarters.
Fits this case: https://www.milwaukeetool.com/Products/48-22-8435 https://www.homedepot.com/p/Milwaukee-PACKOUT-5-Compartments-Small-Parts-Organizer-48-22-8435/303005752 Make a custom organizer for your stuff!
Magnetic Bit holders for the trays that come with the Milwaukee slim low profile packout compact organizers. Uses 6x2mm magnets https://www.amazon.com/dp/B07KJ9H31P?psc=1&ref=ppx_yo2ov_dt_b_product_details Super glue the magnets on the…
This is a level holder for the milwaukee packout. I designed this to fit a Milwaukee level, 4' and up. The width and height dimensions it is based off of is 1.4" x 2.75" plus 1mm clearance on all sides. (some levels have a 3" dimension…
I printed these with a .8mm nozzle so they are pretty stout.
EDIT: I designed the regular height organizer square bin as well. EDIT2: And the regular height rectangular bin. EDIT3: And I designed a divided regular height rectangular bin with removable dividers as well. EDIT4: Added center bins that…
Lots of files! You'll most likely want to print something similar to this: 1× Slim_Packout_Long_Cutout_Bin_for_Milwaukee_bit_holders (This goes on top) 1× Intermediate-Bin (This goes on the bottom) Various bit holders: 4×…
Made this simple conversion to be able to keep the M18 Inflator stacked on a Milwaukee Packout. The rubber feet can be reused with an M4 heat set insert and a M4x10 screw. UPDATE 5/18/24: If anyone is interested in purchasing the print…
EDIT: May 2025 These labels have worked pretty well for me but I'm kinda hamfisted and I've managed to break a couple of them so I decided to make a stronger, more rigid version. There's not much left of the original design at this point.…
Print these 4 sections and link together with push fit links. Then remove all dividers from drawer and lay this in the bottom. This will give you a 9x7 Grid for any gridifinity set you want. Technically you can mirror just one part…
I have change a few details from Sean&Lucia model. All the fillet are now chamfers Added chamfer in the bottom corners to add strenght Added chamfer were the Packout sits for a better stability of the case in the bracket The top surface…
This is a holder for an M18 battery that will attach to the squares on the top of Milwaukee Packout equipment. I was looking for a file and the only one I could find was on Etsy, so I made my own. The fit on the battery is a bit tight if…
EDIT: I have designed 5 additional bins for the organizer center channel, and with those 5 bins - in addition to these three - you can configure the center channel with 5 different bin length combinations. The bins are for purchase in my…
Cable/Cord management system for the Milwaukee Packout. This attaches to the following Packout Tool Boxes: Rolling Tool Box Large Tool Box Tool Box The image above shows a Carol Brand, Froghide Ultra Flex 50ft 12 gauge power cord. You can…
These are inserts Gridfinity organizer bins for: Milwaukee Packout Low Profile Organizer Milwaukee Packout Low Profile Compact Organizer 2025-10-08 Updates - Added new base plates that no longer require trimming and will fit in the Low…
Check out my YouTube for more creations: https://www.youtube.com/@EvanTennie I wanted to organize a large number of bits in my packout but the models I found were sometimes inconsistent with gripping the bits, needed additional hardware,…
EDIT: I have designed 5 additional bins for the organizer center channel, and with those 5 bins - in addition to these three - you can configure the center channel with 5 different bin length combinations. The bins are for purchase in my…
Open Bins for Milwaukee Packout I created these bins primarily because I wanted something with a permissive license that has many options. There are 151 unique objects as of now. You are welcome to submit remixes if you have an idea. The…
made a insert for the slim packout 43pcs 3/8 impact set with a 1/2 to 3/8 icon reducer also with 1/2, 3/8, & ¼ impact drives from milwaukee it is tight fitting and made so the sockets don't move around. edit: made a v2 version i have yet…
It's self-descriptive. It's here for you to make your own inserts from, altering it however you wish or please. This is for the box with code 4932464082 It was slightly amended due to an implication in a comment that was deleted. Some…
UPDATE (Mar 3, 2025): Added a divider for the long bin of the Milwaukee Packout Low-Profile Organizer I wasn't satisfied with the existing models that I've tried for the Milwaukee Packout Low-Profile Organizer : some were too thick; some…
Divide your boxes to sort different pieces. NEW! obj. file included
It holds the stapler very snugly to keep it from rattling around. Even so, you might want to glue a thin layer of foam to the bottom of the stapler pocket. Configured for a stapler with the belt clip on the left side; if yours is on the…
This is a 3D printed Case for the OpenDTU Breakoutboard by blinkyparts.com: https://shop.blinkyparts.com/en/OpenDTU-Breakoutboard-Your-evaluation-for-your-balcony-solar-system/blink237542 The OpenDTU breakout board can be used to read out…
I needed receiver that would allow original Packout accesories with locks like hooks or roll holder.
The “Knockout” Angled Foregrip design! This foregrip gives a different, unique feel when pulling the gun into your shoulder and controlling recoil! ///This cannot use the MMS Quick Release Pins! This needs actual hardware!/// It might…
This is a remix because the internal ribs are slightly different between the 3 and 4 drawer versions of the packout. This uses the same locking pins.
Note: I have completed a universal gridfinity packout for both slim and regular drawers. Here is the link https://www.printables.com/model/1101735-universal-gridfinity-plate-for-milwaukee-packout-d I attempted to create a model that uses…
Overview These label strips provide a place to attach a standard 12mm label (e.g. Brother label maker) to take your Packout organization game to the next level. Features Readable when the lid is open or closed Don't get in the road -…
This insert will hold 5 M12 Batteries (3 CP Type and 2 XP type) and the standard M12 Charger in a Milwaukee 48-22-8435 Packout. It is offered as a single model and as two pieces that can easily be printed on most printers. I print this in…
Upgrade your Milwaukee Packout organization with this Universal Gridfinity Plate ! Unlike my previous models that were limited to either slim or regular drawers, this design works seamlessly with both drawer types , saving you the hassle…
After duplicating the Milwaukee Packout Low-Profile Organizer bins , and creating dividers and a modified low-profile square bin that can go where the low-profile rectangular bin normally sat, I decided I might as well duplicate the deep…
Designed this case with a snap-fit lid to fit a 38 pin ESP32 breakout board, you'll find these all over aliexpress/ebay/amazon, etc. The case has symmetrical cutouts to access the terminals on either side, so you can mount the board in…
EDIT: Created a divided rectangular bin, with removable dividers as well. After duplicating the Milwaukee Packout Low-Profile Organizer bins , and creating dividers and a modified low-profile square bin that can go where the low-profile…
This is my version of a 3D printed Milwaukee Packout insert that will hold the Milwaukee M12 Hacksaw. I used the Milwaukee Packout Compact Organizer insert designed by @ChadBaker_317227,…
I say no supports, but you might want to support the ladder some to reduce bending. Print in Place Gate & Arch: https://www.printables.com/model/436334-medieval-palisade-gate-arch-print-in-place-no-supp Matching Wall Set:…
This deep bin has the top edge on one side cut so it can be placed in the middle section of the packout cases. The big middle bin can now be replaced with two of these. Or use three small bins on one side, and a large open half - like the…
Remixed version of - https://www.thingiverse.com/thing:5116303 Added deeper countersink to fit the hardware that I'm using. #8 Drywall Screw. Also added center tick mark to aid on installing it to the wall. Print Settings Printer Brand:…
Modular connectivity with all Milwaukee PACKOUT components such as the organizer cup, pliers rack, hooks, etc
Created some socket trays for the Milwaukee low profile packout case. You will need to trim off a annoying piece that sticks out on each corner. 6mm to 24mm (Deep and standard sockets) 1/4 to 1" (Deep and standard sockets) I've also added…
Added a Fillet on the face to ease the handle usage. I also simplified some of the surfaces created a Fusion 360 file and 3mf and strengthened the body of the clips. I use the Add Part > Text command with the “cut” Operation in…
See the pdf file for the safest way to remove the packout rails. Drill a hole in the locking tab, use a punch or screwdriver to knock down the edges, and then slide out the rail. I highly recommend against trying to pry on the tab in…
Holds the following impact sockets deep and shallow from Maximum Brand (might work with others) 10, 11, 12, 13, 14, 15, 17, 18, 19, 21, 22 (shallow and deep 24 (deep) extension universal joint Fits the 48-22-8436 packout Printed in PETG…
Looks like a space ship, so that's kinda fun. Also, I included the fusion file, have fun with it!
This is a replacement handle for the Milwaukee compact organizer that accepts an interchangeable label. The handle works the same way as the original handle — it locks in both the folded and extended positions. The label slides into a…
EDIT, August 2026 - It has been observed that Milwaukee changed their bin design slightly and the old version no longer fits. I don't have any of these new bins so I can't verify fitment but I, just eyeballing it, I think the "NEW"…
Spare parts and complementary accessories for your Milwaukee Packout storage boxes and organizers! Accurate fit, extremely stable (more stable than the original) and suitable for all variants. With the dividers you can divide your boxes…
USB Type-C Female Breakout Board Mount / Holder This is a sleek and minimalist mount designed for a popular 4-pin USB Type-C female breakout board (V, D-, D+, G). If you are tired of messy holes in your DIY project enclosures, this holder…
PRINT AT 2540%. TREE SUPPORTS MAY BE USED. AFIXES UNDER DESK WITH 3 SCREWS V1 doesnt have the screw holes for mounting with tape or other uses.
Ozito PXC Battery Mount \ Breakout If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. If you want to support my work buy me a coffee (PayPal). Thanks!
AEG/RIGID Battery Mount \ Breakout You will need a couple of M3x10 bolt and nuts if you want to use the terminals and some of these connector + wire https://www.aliexpress.com/item/1005003770642780.html Updated new -…
So you went to put away your new Milwaukee oscillating multi tool blades for your new Milwaukee oscillating multi tool in your new Milwaukee Packout modular storage bin, only to find out that the blades are longer than any of the…
Esta base resistente para imprimir en ABS o PLA, si es vehiculos o lugares muy calientes recomiendo ABS, sirve de maravillas , facil de imprimir con 10% de relleno. Son super resistentes, se vanca varias cajas en una camioneta sin…
Designed this case with a snap-fit lid to fit a 30 pin ESP32 breakout board, you'll find these all over aliexpress/ebay/amazon, etc. The case has symmetrical cutouts to access the terminals on either side, so you can mount the board in…
Milwaukee Packout Toolbox tray bins to help organize your toolbox trays. Bins are a very snug fit, you could just use a single bin, or an entire side. Several different combinations, including short and tall heights. The 87mm Bins make…
Totally customized organizer with slots for disc sizes 38, 33, 26, 23, 21, 17mm. For use with Milwaukee 48-22-8436 PACKOUT Low-Profile Compact Organizer. The discs are set at a height such that they will not fall out of the holder during…
I remixed the excellent Improved Milwaukee Slim Packout Bin Cross Divider for a 6 way to fit the big bin and a 3 way for the square bins.
I didn't want to take the groove in the lid into concideration when making a custom holesaw insert. To combat this I made a filler piece to delete this gap, and get a smoother surface. Fits well for me, and I hope it can be as useful for…
I wanted a way to hold my drill bit cases, so that I could easily grab them and still see the label. The cases easily slide in and out of these holders. Should fit any of the smaller packout-compatible milwaukee cases
Created to mount your the Milwaukee PACKOUT bins on the IKEA SKADIS!
Bins can stack and still fit inside a closed packout. Print standing on the side with a brim. no supports needed The lids swing out of the way when not in use. The normal version goes from the front and latches on the back, longer lip…
🇲🇦 مرحبا بك في المغرب Welcome to Morocco! Bienvenue a Maroc! This model was designed by Dany Sánchez . The Minaret of the Koutoubia Mosque is the landmark of the Moroccan city of Marrakech. The Koutoubia (or Kutubiyya ) Mosque is the…
An insert for a slim Milwaukee Packout bin to organize a Gearwrench socket set. I included the step files so it can be modified for any set. Print in two pieces for smaller printers.
Petřín Lookout Tower, one of the most prominent landmarks of Prague, was built as part of the Jubilee Exhibition in 1891 as a loose copy inspired by the Eiffel Tower (at a ratio of 1:5). It is 63.5 metres high, and 299 steps lead to its…
I super appreciate Ben and others that create great stuff for the Packout system, but got tired of trying to scale the front bin to fit correctly when I needed one. I also tweaked the other bins to remove the “V2.0” text on the bottom,…
Utilized Davemoneysign's model to make a packout hanger with a gap to slot in a machined screw + nut to hang non-packout items.
This divides and holds the Milwaukee M18 Fuel Oscillating tool model 2836-20 in a Packout Compact organizer. Designer with print in place springs to hold various size cutters on bottom half and sandpaper with mount in top half. Added…
This cleat fits perfectly in the wide opening of the lid. You can use it to attach things to the lid of your packout cases. Print with no suppports
Milwaukee packout mounts that can be attached to various things with screws. I've noticed that even in the worst layer line configuration, it's still very strong. If we have all our bikes out, I use three attached to a piece of 2x4 and a…
Insert to hold an Milwaukee M12 Impact Driver, 2 batteries (one in driver, 1 in insert), charger (with UK plug), Milwaukee hex bit case. There is additional storage underneath the charger and the impact driver which can be accessed by…
This is for the ultra nerdy be warned… I vastly prefer this industrial Brady label maker over consumer options because of the different size of labels and there ridiculous adhesion and durability and color options. This insert neatly…
This is a snap in place label for the Milwaukee Packout Organizer; model 48-22-8430
There are many variations of the packout dividers on Printables and Thingaverse, but I created a new model from scratch using OpenSCAD. The reason to create my own model was so I could create custom variations such as the ‘H’ shape for…
EDIT: Here are the Half-Height Bins . EDIT2: It took a lot longer than I anticipated, but. . . Here are the full height divided bins. Since I have already duplicated the: Milwaukee Packout Low Profile Organizer bins and the Packout…
After duplicating the Milwaukee Packout Low-Profile Organizer bins , and creating dividers and a modified low-profile square bin that can go where the low-profile rectangular bin normally sat, I decided I might as well duplicate the deep…
Replacing stock Milwaukee Packout end caps with this model allows for easy and fast corner rail removal. This model reuses the existing factory screw, and requires the addition of a M5 x 6mm allen socket cap screw per corner. This will…
This is a snap-fit case for the Adafruit 1.8 Color TFT LCD Display with MicroSD Card Breakout, ST7735R. This case is designed to be snap-fit together, not requiring any screws. Please check to see if this fits your display before printing…
This is used to create custom handles for your drawers. Included is some samples as well as the original blank step file to create your own.
UPDATE 3/18/24: I have split this into two models, the box and the lid. I have also made it taller to better accommodate different types of ammo. These I've uploaded as STL files. Thank you everyone for your feedback. This is a simple…
Printed in PLA with 20% infill and 3 walls.
přepážka na rozdělení přihrádky na 4 malé
These are for the 48-22-8435 Small Parts Organizer Models, solid and separated, depending how large your build volume is: P-Mag inserts for 10 magazines P-Mag insert for (4) 10 & (8) 30 round mixed I can do this differently on request, I…
These tags simply snap onto the aluminum corner posts of the Milwaukee Packout Bins. Just use d/s tape or glue to add the tool plate to the snap on bracket, and place as many as you need on each bin. Print with PETG. If you print these,…
All the inserts fit pretty snug. Feel free to modify and create blanks, I didn't have the energy.
