94 models
Optional upgrade for your RepRack or RepBox storage systems. Add a flange rollers to your slip rod setup for enhanced rolling as needed. Print directly from your RepRack or use in a standalone configuration. Snap fits cleanly over slip…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET
QR-code fake WIFI password Links to Rick Astley - never gonna give you up
Print approx. €2.27–€2.77 excl. taxPreliminary estimate for PETGSource material: PET
Check out QR Code Stand → here ← Dimensions: Scan This to Try Out --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a commercial license to sell physical 3D prints of the model Click here to…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
if you want to prank your friend, brother or someone else? let them scan this qr code! the measurements are 70x70x5mm. step-by-step plan cura download the modle. open cura. load the modle. click on extensions top left ⇛ post processing ⇛…
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for one variant
Rickroll your friends with these keychains 😂 No MMU/AMS needed. There are 2 version. Normal, only Rick Astley Same as 1 but with QRcode on the back Print instructions for QRCode version: 0.0→0.2 layer - White 0.2→0.4 layer - Black 0.4→2.0…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
I wanted rollers where the bearings were a bit wider apart as I had a spool pull off when they're closer together, also doubled them up for spools next to each other on the RepRack to feed the Palette. I used 8x20mm metal pins (Amazon aff…
Print approx. €3.63–€4.43 excl. taxPreliminary estimate for one variant
Rick roll. I create in tinkercad.
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
I have uploaded 2 versions: WallMountTrashBag_ScrewHoles - for mounting it with screws. The holes have a diameter of 4mm WallMountTrashBag_Adhesive - for mounting it with adhesive tape / double sided tape Here's what I had in mind while…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
Halterung für die Standard-Blackroll
Print approx. €3.86–€4.72 excl. taxPreliminary estimate for one variant
Mit der neuen Firmware 3.13 ist es nun möglich die MMU zu deaktivieren. Damit das Filament ohne Umbaumaßnahmen jeglicher Art in den Extruder eingefürt werden kann, habe ich diese Umlenkung in Fusion erstellt. Es wird lediglich ein…
Print approx. €2.15–€2.62 excl. taxPreliminary estimate for one variant
I drew this part in FreeCad because I cut the sliding door fabric in the wrong place. I started to reflect on a solution and then came up with a hanger that instead attaches the sliding door at a lower point. This then fixed the gap I had…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Modelle für den BlackRoll Booster um diesen als Massagestab zu nutzen. Inspiriert vom Original BlackRoll Booster Head habe ich ein Version erstellt, die für den 3D Druck optimiert ist. Unten findet Ihr die Daten für einen Adapter, einen…
Print approx. €1.23–€1.50 excl. taxPreliminary estimate for one variant
Einfache Umlenkrolle, für schwerere Lasten anstatt den Bolzen eine M12 Schraube verwenden Simple redirect pulley, for heavier loads use an M12 screw instead of the bolt.
For assembly, 2x ball bearings 6201, a screw M8x65, two washers ISO 7093 - 8mm and an M8 nut are required. The sleeve is slightly longer than the width of the bearing seats so that the screw is clamped onto the sleeve and the bearings are…
prank your friends using this qr code!
For assembly, 2x ball bearings 6201, a screw M8x65, two washers ISO 7093 - 8mm and an M8 nut are required. The sleeve is slightly longer than the width of the bearing seats so that the screw is clamped onto the sleeve and the bearings are…
QR code that sends unsuspecting users to a Rick Roll. On YouTube, with no ads. Be aware that this link may not work in other countries, check the code on the screen before you print.
I printed all parts with 6 perimeters and a layer height of 0.4mm and without support. For assembly, two 608 ZZ ball bearings, an M6 x 35 screw, two suitable washers (preferably ISO 7093) and an M6 nut are required. The main dimensions…
3D printable Free Wi-Fi sign that secretly Rickrolls anyone who scans the QR code.
hang with nail or screw or or just use FLEX TAPE We're no strangers to love You know the rules and so do I (do I) A full commitment's what I'm thinking of You wouldn't get this from any other guy I just wanna tell you how I'm feeling…
Modified RackRoller for RepRack that uses threaded inserts and M3 screws. Also added was mount for 4mm reverse bowen tube Didn't have the threaded forming screws so I made this which uses the same threaded inserts used in the Voron…
a little troll for your friends and family
For assembly, 2x ball bearings 6201, a screw M8x65, two washers ISO 7093 - 8mm and an M8 nut are required. The sleeve is slightly longer than the width of the bearing seats so that the screw is clamped onto the sleeve and the bearings are…
Doppelte Umlenkrolle, z.b. für einen Flaschenzug. Es wird nur eine M10 Schraube und eine Mutter benötigt Double pulley, e.g., for a block and tackle. Only an M10 screw and a nut are required
Die Umlenkrollen eignen sich hervorragend zum befestigen in Einhausungen. Du Benötigst für eine Umlenkrolle 1x Filament_2.3 1x Rolle 2x Scheibe 1x Kugellager 605 1x Schraube M5x20 mit Mutter 1x Schraube 4x16 zur Befestigung Mit der…
Please see PDF file
A fun little Rickroll keychain I made for fun. I was originally using it as a small and cheap test model for manual multi-material and klipper macros. The 3mf file contains the multicolour models and the stl version is single colour and…
Nice yarn bowl You can print it without support structure. Place the model on the flat front.
A playful QR code with the text "Free Robux" above it, but scanning the code leads to a classic Rickroll. A fun trick to RickRoll your friends!
I printed all parts with 6 perimeters and a layer height of 0.4mm and without support. For assembly, two 608 ZZ ball bearings, two M6 x 35 screw, four suitable washers (preferably ISO 7093) and two M6 nut are required. The main dimensions…
Umlenkrolle für IKEA LACK Printergehäuse. Wenn das Einfädeln eines neuen Filaments (für einen kleinen Job) zu aufwendig ist, kann einfach die Rolle angesteckt werden. Teile: 2 X Kugellager ( https://www.amazon.de/gp/product/B078NK6BP3…
:) quick edit in tinkercard, this is the source of the image, see remix for the source of the cube https://www.thingiverse.com/thing:4301446
I printed the noads version, but in case that video gets taken down I included a qr-code with a link to the original video. I can testify it works great when telling guests that it gives you the wifi password.
This is the most sophisticated trap of the 21st century — a QR code that leads straight to Rick Astley’s eternal banger Use it to: Stamp important documents (and betray trust) Add emotional depth to birthday cards Mark territory like a…
Unveiling the "Rickroll QR Surprise" - promising one thing, but cleverly guiding you into the timeless melody of Rick Astley's "Never Gonna Give You Up" for an unexpected twist! Cleverly disguise it as a WiFi QR code or anything you want.…
A stencil producing a QR code to Rickroll people! Printing at 100% scale will let the gaps be about the right size to fill in with a sharpie. You can probably print it as thinner on the Z axis to save on filament and print time but i…
Beim Weber Gasgrill SPIRIT E-325 GBS (Modell 2025) fehlten mir die kleinen Lenkrollen. Im Original sind einseitig nur Standfüsse verbaut, ich bevorzuge jedoch Lenkrollen weshalb ich einen entsprechenden Adapter konstruiert habe.…
An easy, fast, and compact rickroll keychain.
Why? They were lying around, and I stumbled over them 🤕 Features: Lightweight wallmounts for the BlackRoll fascia training devices The double ball mounts also fit the single balls, they are the same diameter. Requirements: • Use any stiff…
This is a filament runout sensor mount for RackRoller & Creality K1. I extended the filament sensor runout leads and attached the filament runout sensor directly to the RackRoller that's directly above my K1. This makes it much easier to…
Money giveaway QR code looking like a scam, but its not. It's a rickroll. DOWNLOAD TO PRANK YOUR FRIENDS😉 Link in QR: https://r.mtdv.me/giveaways/free_unlimited_money
If you're like me, I move my spools along my RepRack all the time so I never set the set-screws on my RackRollers… But as a result, my RackRollers tend to fall off my RepRack 😠 So I made these clips/locks, of-sort, to keep the RackRoller…
Spotify Code Keychain that links to everyones favourite song! I've managed to trick a few people with this. I know there's a few of these around, but this is my take on them, please enjoy!
gedruckt mit: Prusa MK4 Filament Prusament PETG Düse 0.4 mm Schicht 0.2 mm Material: 1 Kugellager B 5 x D 16 x d 8 (leichtgängig) 2 Kugellager B 8 x D 22 x d 7 (leichtgängig) 6 M2 x 10 Schrauben Zylinderkopf mit Innensechskant 6 M2…
Teil kann rechts und nach Spiegelung links verwendet werden. Wurde aus PETG gedruckt. Drucker: Anycubic I3 Mega S Sun PETG Grau Schichthöhe 0,2 Supports wurden verwendet. Treesupport.
Coole Winde für Scaler. Am besten baut ihr die Winde mit einem Kugellager, je nach welchem Kugellager müsst ihr euch die Seilrolle anpassen.
This model allows to properly space the RackRollers for most spool widths as well as serve as filament guide. You will need is a piece of PTFE tube which just fits through the center hole and is held by friction. The model is designed to…
Lenkrolle, die man zum Beispiel unter die Beine eines Lack-Tisches schrauben kann. Die Rollen haben einen Durchmesser von 55mm. Die Aufnahme ist 50mm*50mm groß. Zusammengebaut hat die Rolle eine Höhe von 75mm. Die Rollen können komplett…
Replacement part of a Jib furler As you can see from the picture, the old one broke. You will need to duplicate the part and then mirror the duplicate. Print both parts. The radial (half-)hole has no thread. Consider tapping that when…
Neue Version verfügbar (New version available): https://www.printables.com/de/model/835321-lenkrolle-swivel-castor-version-2 Lenkrolle, die man zum Beispiel unter die Beine eines Lack-Tisches schrauben kann. Die Rollen haben einen…
Its a rickroll qr code that fits on qube500. I just remixed 2 models together to have a funny prank on my pc case :p I printed in on p1s with ams to swap on exact layer but you can do it manualy :p im just lazy
Ein kleines Werkzeug, um wasserdichte LED-Stripes (IP 67, mit Gummierung) gleichmäßig auf den Untergrund zu pressen. Idealerweise lässt man den LED-Streifen etwas erwärmen und fährt dann mehrmals vorsichtig über die gesamte Länge, um ein…
Umlenkrollen für eine bis zu 3mm Schnur Zusammenbau: M6 Linsenkopfschrauben M6 Einschmelzmuttern
A rickroll wifi sign i made to put at a BB
Tight tolerances
Made a character for a friend of mine for his first DnD campaign. Category: Toy & Game Accessories
This is a PTFE Tube Holder for the RackRoller by Repkord . Bill of Materials 1x PC4-M10 pneumatic fitting Options Crossmembers For Linking together Rollers: You have to print a 3rd 7mm diam crossmember or you can use something else. I use…
Einfacher Ständer für 2 Secarollen. Im Baumarkt 2 Holzstäbe mit einem Durchmesser von 25mm oder kleiner besorgen und bei Bedarf den Ständer auf dem Tisch verschrauben. Druckgröße 220x220mm In Fusion kann der Durchmesser für den Stab…
Surprise your visitors with a fashionable, 3D-printed, surprise coaster. Not only are they fashionable - but a surprise is waiting for the guest brave enough to scan them… EDIT: Added a version with a pause mid-print, in order to print…
Hold these lithographs up to a light to be rickrolled! Lithograph files starting with a number correspond to points in the music video where Rick is singing those lyrics. I also combined all the images into one lithograph with some text.…
Eine Umlenkrolle für Filament zur Wand oder Deckenmontage. Material : PETG Umlenkrollen Halter 1 / 2 Layer 0,2 mm / Füllung 20% Umlenkrollen Halter 3+4: Layer 0,12 / Füllung 25 % Benötigtes Material: 1 x Kugellager 608 1x…
X-axis rickroll qr code mount
This is a snerk from my fantasy world. For example, the Krolls believe that snails have maps of their environment on their shells. When the environment doesn't suit them, they think the snail is a traveler. Tohle je snerk z mého fantasy…
INFILL PERCENTAGES: QR Code - 10% (Don't Forgot to Pause print Midway to Change the Color from White to Black) QR Code Holder/Screen Cover - 35% NO SUPPORTS!!!!!!!!!!
https://www.printables.com/model/1035403-lenkrolle-caster-wheel-swivel-caster
Adapter Heckrollo Kia Sorento XJ zu XM
If you are like me sitting all day in front of your computer (not giving s**t about posture) the trigger box set by blackroll works wonders for the aching back and shoulders (btw: I am not getting paid to say that, I am just happy that it…
Hier mal meine Filament-Umlenkrolle, das Bauteil gleitet leicht auf dem Rahmen und kann so für rechts oder links neben dem Drucker stehende Filamentrollen genutzt werden. Der Durchmesser der Rolle ist für Kugellager die ich hier noch habe…
This magazine holder is optimized to hold Finnish Skrolli ( www.skrolli.fi ) magazines. It holds about 17 magazines comfortably. Model in picture got spaghetti accident. Next print will include brim just in case. I encourage you to make…
This 3D-printed adapter is a practical solution for carrying your Black Roll conveniently during travel, workouts, or outdoor adventures. Designed to securely attach your Black Roll to backpacks, gym bags, or carabiners, it offers…
An easy redesign to add a holder for the 2 tubes for the rackroller.
I installed the Reprack and RepRackXL in my closet and needed the roller for the XL. I'm still learning how to use Fusion360, so this was a copy. I'm sure there was a better way to do this. This was printed on a modded K1 Max with a 0.4mm…
Keychain with spotify code of rickroll
This base lifts the blackroll up so it can be used to stretch your neck when lying on it. I included the STEP file so you should easily be able to adapt the height if this one doesn't fit you.
Doppel-Umlenkrolle für meinen Kurzlieger. Passt auf eine 16 mm Achse. Für Achsen mit geringerem Durchmesser muss ein entsprechendes Reduzierstück verwendet werden. Für die Rolle wird zusätzlich benötigt: - Rillenkugellager 6904 20x37x9 -…
With this extender you can massage also your back ALONE! Just print out. the inlet is quite tight, if it is too loose place a piece of tape into the inlet so the gun is hold in place. You need a M6 55mm screw an a bolt knob like here:…
Du hast einen ErGear elektrisch höhenverstellbaren Schreibtisch (120 x 60 cm) und möchtest ihn flexibler machen? Mit diesem 3D-gedruckten Adapter für Lenkrollen kannst du deinen Stehschreibtisch ganz einfach mit Rollen ausstatten – für…
CoreOne - Filamt-Umlenkrolle to the English version für nebenstehende Filamentrollen. Mit Schnellverschluss kein Filamentwechsel notwendig oder einer gesicherte Führung Benötigte Teile Gedruckte Teile: base.stl pulley.stl (2x) spacer.stl…
designed for: https://www.bauhaus.at/doppelrollen/stabilit-kohlenkastenrolle/p/10130918 Without this spacer the wheel would contact the surface mounted to
As a child, his parents probably sent him down the river under unclear circumstances. Where he was taken in by the sturdy and intelligent Kroll Pepa. He was a shaman and taught him everything from fighting to the basics of shamanism and…
Um die Stabilität zu bekommen habe ich die Teile mit PC gedruckt mit einer beeindruckenden Stabilität. Das Rad selbst ist ein Kugellager mit den Abmessungen 4x13x5 mm. Darauf kommt der “Reifen” aus TPU um die Böden zu schonen. Die…
Die ansonsten robusten Mähroboter der älteren Gardena-Serien R40li und R70li haben eine ziemlich blöde Konstruktion iher hinteren Stützrolle. Im Original ist das ein Plastikfass, das nur in einer Richtung drehen kann, so dass es schnell…
Here are some QR codes that seem to connect you to Wi-Fi, but they're all Rickrolls. Some are harder to scan (I had to break more rules of the QR standard to honor the pixel art), so test-scan before you print. Each QR code points to a…
This is a flexible holder for the pulley on a TOPCAT catamaran. It holds the pulley above the deck an prohibits by this, that the pulley hangs beside the boat and gets caught by the passing water when sailing. By this, also the reacher…
See below for the translated description. BESCHREIBUNG Mit diesen Umlenkrollen für die GT2-Zahnriemen habe ich bei meinem Prusa Core One alle 12 Original-Pulleys ausgetauscht. Alle M3-Schrauben werden wieder verwendet. Ein kompletter Satz…
CoreOne - Filamt-Umlenkrolle to the English version für nebenstehende Filamentrollen. Mit Schnellverschluss kein Filamentwechsel notwendig oder einer gesicherte Führung Benötigte Teile Gedruckte Teile: base.stl pulley.stl (2x) spacer.stl…
Die ansonsten robusten Mähroboter der älteren Gardena-Serien R40li und R70li haben eine ziemlich blöde Konstruktion iher hinteren Stützrolle. Im Original ist das ein Plastikfass, das nur in einer Richtung drehen kann, so dass es schnell…
Money giveaway QR code looking like a scam, but its not. It's a rickroll. DOWNLOAD TO PRANK YOUR FRIENDS😉 Link in QR: https://r.mtdv.me/giveaways/free_unlimited_money
Get ready to "Never Gonna Give You Up " – with this hilarious Rickroll Stamp! 😎 Perfect for pranks, this 3D-printed stamp leaves behind a QR-Code with the iconic “Never Gonna Give You Up” message, surprising anyone who dares to check.…
