47 models
The professionally designed travel/storage case for the Henson AL13 safety razor is a sleek and innovative solution for safely transporting and storing your razor and blades. Designed with precision and attention to detail, this…
Simple blade guard that slips over your Henson AL13 safety razor so you can throw it in you dopp kit (toiletry bag) without worrying about inadvertently cutting things or damaging the blade. There are drain holes in the bottom to keep…
Model Blaniku L13 - NElítá Model of L13 Blanik - no flight
A simple stand for the Henson Shaving AL13 safety razor with a spot for a pack of blades and a sharps disposal box; which can be found here: https://www.printables.com/model/779604-safety-razor-blades-sharps-disposal-box I will probably…
I didn't have a travel case for my AL13, and there were only some around that I weren't fully happy with, so I thought, Why not design and print one myself :D ? This model is print-in-place, as I wanted to try it to improve my skills.…
The Henson AL13 is a great razor, but it does not come with any kind of protective cover. The blade remains exposed, so can easily be damaged when stored, especially in a bag with other toiletries. Similarly, leaving the blade exposed…
made chest wider, so shoulders are wider for that superhero look.
I used tinker to lengthen the clavicle because I wanted that broad shoulder look
Happy printing, not sure if scale is giant. looked about right. happy printing.
L13 Sailor moon accessories
Housing Unit for a water level meter based on ESP32 and the TL-136 sensor. This housing unit is designed for a control system that is measuring the water level in a 100l cistern and sends the results via WIFI to home assistant. The 100l…
I tinkered the hands so they would print on the bed. originals didn't print correctly because print was not flat on the bed.
Razor holder for my Henson AL13. I attached it to my mirror cabinet with double faced adhesive tape. Works for handles with a diameter up to 11mm. For the source-file see…
STL that is uploaded does not include the initials. I only added those to customize my stand.
A well designed, durable, compact travel case worthy of protecting and carrying your Henson Shaving Razor AL13. Carries one AL13 shaving razor without having to dismantle the razor. Carries up to two boxes of razor blades The razor can be…
The stock rubber way wipes on my Birmingham YCL1340GH kinda suck. I designed these upgrades in 2 pieces each. the main part can be printed in PLA, ABS, PETG or anything you want, then the wiper part printed in flexible TPU and the parts…
since the grether's tin box has a thick top border, insert the spacers and afterwards the inlay itself, this way there is no need to bend the tin box. [edit]RK razor blades have slightly larger packaging so i uploaded a version with a…
Played around with surface textures, printed at 0.05 ultradetail and 100% infill to test out settings. Organic support.
similar to the pointing hands, remixed so base is flat on bed.
My Birmingham YCL1340GH came with a 30t, 40t, and a 127/120 double gear, which allow most common inch and metric thread pitches. These additional change gears will allow you to cut nearly any pitch that exists. For example, The stock…
Recommended to print in PETG. Print on side. No supports needed.
Quickly modelled this up to safely hold my razor and to travel with it (and blades). Features: The base and lid are the same piece just flipped with a snap together fit. Holds the assembled razor and 5-6 razor blades (in their wrapping -…
you need glue to assemble your 3M traffic signal. LEDs---> EBOOT 100 Pcs Clear LED Light Emitting Diodes Bulb LED Lamp, 5 mm (5 Colors): Amazon.com : Industrial & Scientific
Printed on Prusa Mk3S+ with MMU2. 0.15mm layer height, 3 perimeters, 15% Grid infill, automatic organic supports on base only. 1 hour 44 min print. Suction cups in photo connectors have a 15mm dia outer flange with a 9mm dia by 2.5mm high…
This is a chuck cradle / bed protector for 6" and 8" lathe chucks. I designed it to fit the ways on the Birmingham YCL1340GH, Grizzly G4016 and many other brands of the 13.5x40 lathes sold by various US Importers. Use a raft and plenty of…
Lucky 13 as well L13 I make this gun accessories for L13 for my figure non official accessories
This is a travel case for the Henson AL13 razor. The diameter of the bayonet container is designed to fit the head of the razor. A spacer that fits the razor handle is needed for the container base. This case allows storage of the razor…
A simple and easy to print laptop stand for the Lenovo ThinkPad L13 Might work for other laptop models as well prints well with 0,4 mm to 0,8 mm nozzle with about every material (maybe not TPU :) ) I've used Tree Support for the little…
An ergonomic wall holder for the Henson Shaving Razor AL13 which holds the shaving razor at a perfect 5° angle. Easy to grab the shaving razor off the holder, and easy to place it back. Printed mine in PETG, and mounted using 3M mounting…
Stand for an Henson AL13 Razor, inspired strongly by Henson's stand. They arms are sized to the handle of the AL13 Razor. There is a cutout on the bottom for a rubber pad and a second cutout inside to allow the addition of a weight mid…
This is the hood with a scoop, allowing extra clearance for additional motor cooling of your winch truck from 3DSets. You should print the hood with extra supports. You can also change the density of a mesh in prusaslicer. Honestly, I am…
There were a couple minimal holders out there for the AL-13, but they had the following issues IMHO: contact with blade: the blades were not protected from the sides. Sure, it's plastic … but the point is to be “razor sharp”, lets not rub…
Same as original.
I wanted a razor stand for my AL13 safety razor that was a bit more fun and thought the Gandalf model made by Erenirga - Gandalf Cartoon Figure ( https://www.thingiverse.com/thing:6236884 ) was perfect for this. All credit goes to this…
I made a simple Wall Mount for a Lenovo L13 Gen 4. It should works with other laptops that are not thicker then ~22mm. It is my first Project so it may have some design issues that could be fixed. I printed it on my Elegoo Neptune 3 with…
Remixed the lamp to mount Dioder L1327 multi-colour led lamps. New mount for lamp, to mount, remove the metal mounting plate, then snap the lamp in the mount. (The pivot point should point toward where the metal plate was, photo will…
This simple print makes it easy to get a full cover around the Henson AL13 shaver's blade while allowing you to grip the tip firmly and twist the handle when changing the blades. Sliced my finger tips once badly enough to need stitches…
This is a custom-designed counter stand for the Henson Razor AL13 that holds it securely at an angle without hanging. I designed it as a two-piece system: the stand face has a female connector, and the base has a male connector. I…
I printed this with ABS.. you may need some tweaking to get it to fit with other filaments. Category: 3D Printer Accessories
I designed this to securely hold my shaver on the wall. It features two mounting holes for drywall screws, or any fasteners you prefer. Alternatively, the large flat surface is perfect for double-sided adhesive if that’s more your style.
Cube_5x5x5_E1_K6_L13 - Peng Song A size 6 cubic puzzle of 5 pieces, rated at level 13 (moves to remove first piece). Adapted from web page: https://sutd-cgl.github.io/supp/Publication/projects/2022-SIGGRAPH-High-LevelPuzzle/index.html ACM…
Guess what i did today i made a new custom figure but this i made a custom as being look as my friend Lucas
The model can be printed with a FDM filament printer or a SLA resin printer, and used as is or subsequently used for sand casting the stand in metal (shown in brass), since it includes all the necessary draft angles. Source code (.stp &…
I needed to mount my (very old) Cateye HL-EL 130/138 not to the handlebars, but to the handlebars stem. Since the stem is at an angle, this needed to be angled as well. So there are 4 distinct parameters of the model: CLIP_TO_BAR_ANGLE :…
I wanted a razor stand for my AL13 safety razor that was a bit more fun and thought the Gandalf model made by Erenirga - Gandalf Cartoon Figure ( https://www.thingiverse.com/thing:6236884 ) was perfect for this. All credit goes to this…
A well designed, durable, compact travel case worthy of protecting and carrying your Henson Shaving Razor AL13. Carries one AL13 shaving razor without having to dismantle the razor. Carries up to two boxes of razor blades The razor can be…
