Counting matching models…
2025/10/17 v4.0 Update: Make the ridges on the cap smaller so it would close shut without bulging. ----------------------------- 2024/10/09 v3.0 Update: Add ridges to the cap so it won't pop out. Enlarge trim-pot holes and merge them…
This is a Case for the XL4016 Step-Down Converter. The circuit board size is 65x36,5mm. The holes for the screws have a distance of 58 mm at the longe side and 26mm at the short side. The diameter of the hole is for 3x7,5mm sheet metal…
Dies ist ein einfaches Gehäuse für das hier beschriebene XL4015 Step-Down-Modul: https://www.electroschematics.com/dc-module/ Es enthält eine Zugentlastung und Lüftungsschlitze. Ich benutze es, um einen Dell Wyse 3040 vom Druckernetzteil…
Author : Mikael70 Link : https://www.thingiverse.com/thing:4270395 Thanks to Mikael70 for his work and sharing.
housing for a step down converter Link Amazon can be printed in PET (preferred) or PLA includes 2 cavities for zip ties to secure your cables inludes a version with “printhelpers” to improve adhesion to the bed and can be cutted off…
I created case for XL4015 converter, because I cannot find anything suitable. It is for this converter: https://www.aliexpress.com/item/32830922824.html DC-DC Converter Step-Down 1.25-32V 5A with LED Display - XL4015 Don't require any…
Case with mounting holes for jl-12a300 or XL4016. It's a 300W stepdown DC converter. Print top cover upside down, PLA may have too low heat resistance, ABS and other would be better. Module is mounted on 4 plastic elementnts inside, you…
I needed an enclosure for a 55 x 25 x 16mm XL4015 buck converter module which I got from BerryBase . I recommend printing this in PETG since the module may warm up. No supports needed*. Use four M3x25mm screws and regular nuts for…
Mounting bracket for the XL4016 DC buck converter module from AZ-Delivery.
For Case : 4x M3 5mm - 10mm Screw For Din Clips : 2x M3 5mm - 8mm Screw
BASIC MODEL: XL4015E1 Step Down Module (2 Versions)
XL4016 Case XL4016 Case that can fit on 20x20 or 20x30 extrusion using T-Nuts T-Nuts used https://www.printables.com/model/243890-t-nut-m3-drop-in-rotating-v-slot Im using this to convert the 24v from the power supply to 5V 3A for a…
This is a simple enclosure for the XL4015 Buck Converter Module that can be found all over eBay/AliExpress. Since the module has no mounting holes, I designed the case so the module can be mounted to the bottom part with double sided…
I've got this XL4015-based holder for which none of the existing cases/holders fit (it has no mounting holes), so … flippity jippity. The board is 51x26 mm in size; depending on the manufacturer, there can be small variations - try…
A small enclosure for a voltage regulator based on an XL4015. It has holes for ventilation. It fits boards like these: https://www.amazon.com/gp/product/B079N9BFZC
Small case for xl4015 based cc cv buck converter with holes for voltage and current adjustment. Preferrably print the lid with transparent or translucent filament to be able to see the status led. Photos coming soon…
This is the case for the buck converter XL4015. To fixate the lid, you need to insert it sideways and then turn
XLSEMI - XL4016E1 Based Buck Module
Take your DIY electronics projects to the next level with this functional and protective shell. Specifically designed for the popular XL4015 module with integrated voltmeter , this case transforms a bare circuit board into a finished,…
This is a small box I made to house my XL4015 DC-DC Buck Converter. This enables me to plug-in any DC power supply up to 32V and then step down the output to any voltage from 0.8V to 30V DC. This unit can have its maximum output current…
I Printed this is coloured PLA, Red for the lain body and black for the straps and PCB holder, printed with 0.2mm layerheight. Main Body 1x Strap 2x XL4015 Box 1x End 1 & 2 1 each Picture added of the XL4015 step-down module used.
This is a self-adhesive mounting plate for XL4015 DCDC Converters with display. If you want to remix it, the step file is included.
- Adjusted the lid to fit better with the box. It also closes. - Added hole for nail in the lid. - Adjusted the input and output holes. - Increased height for models where the coil is vertical. - Added silkscreen of input and output…
XL4015 box pro našroubování dalšího dílu pro uchycení na DIN. Přesněji: https://www.printables.com/cs/model/446497-drzak-na-din-listu-pro-zavitovou-vlozku-m3
This is the longer version of my other design to accommodate the addition of cable strain relief. I also moved screw holes to secure the board outside because its position change with every batch I bought.This is the longer version of my…
I needed a case for two DCDC converters. One to power the Pi, and a second one for the 12V LEDs. I printed it in PETG, as it was in the machine, but PLA should also work fine. No supports needed. I made it specifically for these, but…
Case for XL4015 CC CV DCDC module The case is assembled using M3 countersunk screws. Special features: optional bottom part with a small 20mm wide opening to fasten the case with a thin velcro strap (see picture) If you want to see the…
Find out everything you need to know about the housing XL4015 on my blog: https://nerd-corner.com/step-down-modul-dc-dc-lm2596s/
Remixed my own design to add space for a diode. This is useful for cases where you leave the buck converter connected to a battery all the time to prevent current back-flow. Category: Electronics
box to fit dc-dc xl4015 buck or xl6009 boost boards screw hole on bottom, wire exits on ends side clips to hold boards slip together holds tight Category: Electronics
https://pl.aliexpress.com/item/1005005730361457.html
This is for the boards with a voltage readout (see images). Adding a fan will allow you to use the buck converter under heavier sustained loads. You will need: 3010 axial fan M2/M3 screws Optional: M3x5x4 (Voron standard) heatset inserts…
A base for XL4016 to protect it, for easy use and to prevent touching it from the bottom when using it.
Mountable with M5x10 Category: Parts
Updated version (v2) * of my XL4015 support bracket.* Now in one single piece, more compact, stable and stiffer. Designed to install the basic XL4015 board into the electronics box of my Ender-5 Pro (suitable for many other printers too).…
This is a very good buck converter for LED or other projects, capable of delivering 150W of power. You can find the link for the step-down converter here: https://s.click.aliexpress.com/e/_oCTKc3B
I've converted an old iPad Air to run without battery and I needed a small box that contains the XL4015 converter used to lower the input voltage to the 3.73v that were provided by the battery. And so here it is. :) It requires 2 M3 brass…
XL4015E1 with lcd BOX Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Plastika Trček PETG any Category: 3D Printing
Find out everything you need to know about the housing XL4015 on my blog: https://nerd-corner.com/step-down-modul-dc-dc-lm2596s/
Best printing recommendation: . . Speed: 50mm/s Nozzel size: 0.5mm Nozzel: 205c Bed: 60c Filament: Elegoo PLA Wall counts: 1
Housing 1 for a module. Housing_2 for two modules, I use these boxes with the XL4015 DC/DC 5A converter module, powered by a 12V battery, to adjust the voltage to different components of my telescopes. Each casing requires four Ø3x8 mm…
XL4015/LM2596 Holder for 3D printers Created a model to hold the DC-DC converter I'm using for the RPi on my Ender 3 Neo. Since i couldn't find one that fits my specific board, modeled one myself. Can be printed in PLA easily, with…
2025-06-24 UPDATE: Top lid should hold in place by itself now. I haven't printed updated version, but everything should be fine. Printed with PETG 0.16 layers 2 walls 20%infill Print with front face on the bed without supports. Buck…
You should be able to print this with no supports. Make sure you run the wires through the supports supplied, and connect the wires before inserting XL4016 into cover. You could super glue or simply melt the inserts if it wont stay in place
Find out everything you need to know about the housing XL4015 on my blog: https://nerd-corner.com/step-down-modul-dc-dc-lm2596s/
A 3D-printable bracket designed to securely mount an XL4015 power module inside a PS2 Fat console. 🛠 Features: Custom fit for XL4015 PSU mod Requires 4x M2x8 screws for installation Strong and stable design for a secure mount Easy to…
Case for XL4015 5A buck converter with display Print Settings Printer Brand: Creality Printer: Ender 3 Pro **Rafts:** No Supports: Yes **Resolution:** 0.2 Infill: 20% **Filament:** eSUN ABS Red Category: 3D Printer Accessories
I couldn't find a proper Raspberry Pi 4 case with fan and voltage regulator, so I designed one by myself. It's not fancy, but it does the job. You will need additionally: 1x Raspberry Pi 4 4x M3x30 countersunk screw 1x 40mm fan 4x…
Buck Converter Cover for XL4015 68mm x 40 mm with LCD attached ipt Print Settings Printer Brand: Creality Printer: Ender 3 Pro **Rafts:** No Supports: Yes **Resolution:** 0.2 Infill: 100% **Filament:** eSUN ABS Red Notes: I used ABS, temp…
This version is in-line and therefore as no requirements for a jack at all. Category: Electronics
I was looking for a box that could house the buck converters, because I was making the noctua fan upgrade on my Ender 3 Max and these were readily available to me. Unfortunately there wasn't a housing in existence for the XL4015 Buck…
Scaled the original "Box for XL4015 4-button Stepdown converter" down to accomodate the 2-button XL4015. Print Settings Rafts: Doesn't Matter Supports: Yes Notes: It is quite an exact fit so add +/- 1% (in the slicer) to allow for…
Mount for AZDelivery XL4016E1 DC-DC Step Down Buck Converter to power RPI4 with DSI Display and cam. Mounted inside the original Reborn 2 electronics box. Screwed with t-nuts to the right beam, the AZDelivery XL4016E1 DC-DC Step Down Buck…
i use pixel 1 phone for google photo backup. one of the biggest issue for using pixel is the battery swelling. So i decided to using it without battery and direct dc using battery circuit and xl4015 step down module. this case is for the…
I needed to mount an XL4016 DC-DC converter into my Voron, so I took this DIN mount and sorta turned it inside-out. I put a few non-conductive washers in between the XL4016 PCB and the mount since the bottom of the PCB is not perfectly…
This is a remix from "nghtshd" case for Raspberry pi zero to mount up a XL4015 stepdown driver. You can get the other required parts from his design under 3408587 The support on the holes is integrated so it has to be removed after…
Description: This is a minimalist case for XL4015 DC-DC Buck Converter. Intentionally designed to optimize space for assembly inside any enclosure. Instructions: You might need to add supports for the screw holes if you print it upside…
This is a compact and functional 3D printable case designed for building an adjustable DC power supply using XL4015 or LM2596 modules. The enclosure is carefully designed to provide a clean and organized layout, making your DIY power…
This is a functional remix designed as a mounting solution for the original Raspberry Pi 4 case with fan and XL4015 module. The original model provides a well-designed enclosure, while this remix focuses on integrating that case directly…
Designed this simple model to make sure i get the dimensions right in other designs. This is not designed for printing. In addition, a CAD file (Kompas-3D) is present.
I needed a suitable enclosure for my step-down module to power my LEDs. I found a file created by @MartinL_2160 and modified it to suit my requirements, as his module differed from the one I am using. It is installed in my VzBot330 to…
Hier findet Ihr ein Modell von einem Bracket für einen Step-Down-Wandler. Diesen Verwende ich an meine Eigenbau Drucker um einen Servo mit 8V zu versorgen. Gedruckt habe ich das Bracket in PETG CF. Viel Spaß beim Drucken. Wenn Euch das…
Take your DIY electronics projects to the next level with this functional and protective shell. Specifically designed for the popular XL4015 module with integrated voltmeter , this case transforms a bare circuit board into a finished,…
Only some slight modifications made. I raised the height about 10mm and remade the appropriate cutouts for terminals. Also had to recessed the cutout to lay board. Only modified the bottom plate..
